ページ1に含まれる内容の要旨
Network Camera
Operating Instructions
Model No. WV-NM100
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
ページ2に含まれる内容の要旨
ENGLISH VERSION Caution: For U.S.A Before attempting to connect or operate this product, please read the label on the bottom. NOTE: This equipment has been tested and found to com- ply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro- vide reasonable protection against harmful interference in a residential installation. CAUTION This equipment generates, uses and can radiate radio fre- RISK OF ELECTRIC SHOCK quency energy and, if
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli- fiers) that produce heat. 9) Do not defeat the safety purpose of the polari
ページ4に含まれる内容の要旨
CONTENTS PREFACE ....................................................................................................................... 6 FEATURES ................................................................................................................ 6 PRECAUTIONS .............................................................................................................. 7 PLATFORM .......................................................................................................
ページ5に含まれる内容の要旨
ADVANCED SETTINGS ................................................................................................. 54 Advanced Settings for “Operation mode” .................................................................. 54 Adjusting the Picture ................................................................................................. 56 Settings for the Host Authentication .......................................................................... 58 Settings for the User Authenticati
ページ6に含まれる内容の要旨
PREFACE This is a camera that can be connected to a network. You can view camera pictures with the web browser on a personal computer (PC), by connecting this camera to networks such as a LAN or the Internet. FEATURES This camera offers you the following features: ● You can use it with the web browser of a PC. You can view camera pictures, set up preferences for the camera and operate the camera with the web browser of a PC just by connecting the camera to a network. Note: Setting of the network
ページ7に含まれる内容の要旨
PRECAUTIONS ● Refer all work related to the installation ● Built-in backup battery of this product to qualified service Before the first use, charge the built-in backup bat- tery by turning on the power for 48 hours or more. personnel or system installers. If it is not charged enough, in the case where the ● Do not operate the appliance beyond its power goes down, the internal clock may keep bad specified temperature, humidity, or time or the operative condition may be different to power source
ページ8に含まれる内容の要旨
PRECAUTIONS PLATFORM Setting up and operating this camera is possible with PCs meeting the system requirements described below. ® ® OS: Microsoft Windows 98 Second Edition ® ® Microsoft Windows 2000 Professional Service Pack 2 ® ® Microsoft Windows Me ® ® Microsoft Windows XP ® ® Microsoft Windows NT Workstation 4.0 Service Pack 6a Computer: PC/AT Compatible ® CPU: Pentium II (300 MHz or higher) for still pictures ® Pentium III or faster for motion pictures (MPEG-4) Memory: 128 MB or more Monit
ページ9に含まれる内容の要旨
TRADEMARKS AND REGISTERED TRADEMARKS • Microsoft, Windows, Windows NT and Windows XP are registered trademarks of Microsoft Corporation in the U.S. and/or other countries. • Netscape, Netscape Navigator, Netscape ONE, the Netscape N and Ship's Wheel logos are registered trade- marks of Netscape Communications Corporation in the U.S. and other countries. Other Netscape product names used in this document are also trademarks of Netscape Communications Corporation and may be registered outside the
ページ10に含まれる内容の要旨
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS Front View Dome cover Power LED You can select ON or OFF for the LED on the “System” page. (Refer to page 63.) Rear View Power plug connector Connector cover (Only use the AC adapter supplied) To detach the connector cover, hold down Alarm connector the part and slide it. Ethernet connector Link LED (Lights up when communication with connected devices becomes possible.) Access LED (Lights up when accessing to the network.) Inside of the
ページ11に含まれる内容の要旨
INSTALLATIONS This is an example of an installation onto a wall. Wall-mounting bracket STEP1 Install the wall-mounting bracket onto the wall using the screws. Screws STEP2 Install the camera onto the wall-mounting brack- et by referring to the illustration shown on the left. It is possible to install the camera upside down. Install the camera in the upside down position according to your needs. STEP3 Confirm that the Panasonic logo is in the posi- tion shown in the illustration. If the logo is u
ページ12に含まれる内容の要旨
CONNECTIONS Before starting the connections, confirm which type of connection meets your needs. The following explanations are provided for each connection type. Prepare the required hardware and cables for your connection type before starting the connections. ! Important Before starting the connections, confirm that all the power switches of the camera, the ADSL/cable modem, the switching hub and the PC are turned off, and that all power plugs are not connected to the outlet. Connection between
ページ13に含まれる内容の要旨
Using with an Intranet (LAN) (Connection type 2) Connect the camera to an intranet (LAN) using an Ethernet switching hub or router when browsing camera pictures of a camera installed in the same LAN (the intranet of a company or home). < Connection example > Ethernet switching hub or router To an outlet (120 V AC) LAN AC adapter To an outlet (120 V AC) AC adapter < Required hardware > Ethernet switching hub or router < Required cable > Ethernet cable (category 5 straight cable) ! Important
ページ14に含まれる内容の要旨
CONNECTIONS Using via the Internet (Connection type 3-4) Connecting the camera to the Internet using an xDSL modem or a cable modem. < Connection example > Connection of Cable modem a single camera To an outlet Cable line Internet (120 V AC) Connection type 3 AC adapter Broadband router Cable modem or xDSL modem (1 port) To an outlet (120 V AC) Internet Cable line AC adapter or xDSL Connection line type 4 To an outlet (120 V AC) AC adapter < Required hardware > • Cable modem or xDSL mod
ページ15に含まれる内容の要旨
SETUP After completing the connections, it is necessary to set up the network of the PC and the camera. To operate the camera connected in a network such as a LAN or the Internet, it is necessary to set up the network. Use the provided "Panasonic IP Setup" software to set up the network of the camera. (Refer to the next page). If the setup with the provided software fails, set up the PC and the camera separately. For further information, refer to pages 18 - 28. Preparations for the Setup Prepare
ページ16に含まれる内容の要旨
SETUP Setup with the Provided "Panasonic IP Setup" Software Set up the network of the camera by using the "Panasonic IP Setup" software included on the CD-ROM provided with the camera. STEP1 When the provided CD-ROM is inserted into the CD-ROM drive of the PC, the launcher software starts up and the readme file is displayed. Items included in the software • SETUP • Instructions • MPEG-4 Installation After reading the readme file, click the [SETUP] button. Notes • Double click "launch.exe" on the
ページ17に含まれる内容の要旨
Screenshot 2 The setup window appears. STEP4 Set parameters for each item. "IP Address" "Subnet Mask" "Default Gateway" "HTTP Port" Enter parameters depending on your environ- ment. For further information about the parameters, refer to pages 27-28. "DHCP" "DNS" Click the [Enable] radio button when using the DHCP and the DNS. When using the DNS function, enter the “Primary DNS Server address” and the “Secondary DNS Server address”. Notes • If DHCP is enabled although there is no DHCP server in t
ページ18に含まれる内容の要旨
SETUP Network Setup of the PC To set up the network of the PC, first change the TCP/IP settings of the PC to match them to the default settings of the camera. The following are the default network settings of the camera. • IP address: 192.168.0.10 • Subnet mask: 255.255.255.0 • Default gateway: 192.168.0.1 To access the camera, the IP address of the PC should be "192.168.0.XXX" (where XXX should be a number from 2 to 254 except 1 and 10). In case the IP address of the camera is set with the "Pa
ページ19に含まれる内容の要旨
Screenshot 3 The "Network" window appears. STEP3 Click the [Configuration] tab. STEP4 Click to select the TCP/IP protocol of the cur- rently used network card. STEP5 Click the [Properties] button. Note If the “TCP/IP” item is not displayed, refer to the operating instructions of the OS and follow the procedures to install the TCP/IP. Screenshot 4 The "TCP/IP Properties" window appears. STEP6 Click the [IP Address] tab. STEP7 Click the "Specify an IP address" radio button. STEP8 Enter the IP add
ページ20に含まれる内容の要旨
SETUP Using Windows 2000 The following procedures are examples when using Windows 2000. You can proceed in the same way when using Windows NT. ! Important Log in as one of the administrators before beginning the setup. Screenshot 1 Begin the setup when the PC is in the same condition as just after the startup. STEP1 Select "Network and Dial-up Connections" ([Start] - [Settings] - [Network and Dial-up Connections]). Screenshot 2 The "Network and Dial-up Connections" window appears. STEP2 Click th
