ページ1に含まれる内容の要旨
16382 Digital Camera
Owner’s Manual
© 2006 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective companies.
- 1 -
ページ2に含まれる内容の要旨
Table of Contents Key Features ............................................................................................................3 What your camera includes:.....................................................................................4 Computer System Requirements .............................................................................4 A Quick Look at Your Camera..................................................................................5 Preparing Your Cam
ページ3に含まれる内容の要旨
Introduction Thank you for purchasing your 16380 digital camera. This camera can be used as a webcam and as a digital camera. To download photos to your computer, you need only connect the USB cable from your computer to your camera. Kids Cam Show and Share Creativity center will help you get the most out of your camera. Packed with powerful, yet easy to use features, “Show and Share” will lets you manage, enhance, turn your photos into Active Images and share your photos with friends a
ページ4に含まれる内容の要旨
What your camera includes: Digital Camera Kids Cam Show and Share Creativity center and driver software installation CD USB cable Strap User’s Manual Computer System Requirements To be able to download photos to your PC you will need the following minimum configuration: Pentium processor or above with MS Windows 2000/XP 128 MB RAM, 150 MB free disk space Available USB Interface CD-ROM Drive Color display (16 bit or higher recommended) VGA Resolution 1024 X 768
ページ5に含まれる内容の要旨
A Quick Look at Your Camera Preparing Your Camera for Use Battery Installation Your camera requires two AAA batteries. Insert the batteries into the camera: 1. Slide the cover of the battery compartment open. - 5 -
ページ6に含まれる内容の要旨
2. Insert batteries according to the polarities (+ and -) indicated on the inside of the battery cover. 3. Close battery compartment. WARNING: Opening the battery compartment and/or removing the battery will erase the photos currently stored in the camera. Download your photos as often as possible. Photos may be lost when the batteries run low. The LCD will flash when your batteries are running low, you will need to replace your camera’s batteries, please download any photos
ページ7に含まれる内容の要旨
Starting Your Camera Press the mode button to start the camera. The camera will sound a beep to confirm that your camera is on and ready for use. Taking Photos Compose your shot using the view finder. Hold the camera steady and press the shutter button to take photo. The camera will beep when a photo is taken. The number of photos taken is displayed on the LCD screen. If you attempt to take a photo when the memory is full the camera will beep continuously. The Camera Modes
ページ8に含まれる内容の要旨
3. If the LCD displays “Lr” this means that the present resolution is “Hr” and in order to change to “Lr”, click on the shutter button within 5 seconds. 4. All photos taken after changing resolution will be at the new resolution. The photo resolution settings determine the number the number of photos and the amount of memory required for each photo. The following table tells you how many photos can be taken based on the image resolution and light conditions: Resolution Indoors Out
ページ9に含まれる内容の要旨
Self-Timer You can include yourself in a photo by using this feature to delay the time between your pressing the shutter and when the photo is actually taken. It is recommended that you use a tripod when you use the self timer. 1. Press the mode button to select the icon shown on the LCD screen. 2. Press the shutter button to start a 10 second count down (the LCD will flash once a second). After 10 seconds a photo is taken. Delete (Last Photo) To delete the last photo taken:
ページ10に含まれる内容の要旨
Delete All To delete the last photo taken: 1. Press the mode button to select the icon shown on the LCD screen. 2. Press the shutter button, the photo counter will flash. 3. Press the shutter button again within 5 seconds. All photos in the camera will be deleted and the The LCD counter will be reset to 00. Frequency: Using the incorrect frequency setting under fluorescent lighting could result in poor images or video flickering (when using the WebCam). Set the camera for the
ページ11に含まれる内容の要旨
Power Off 1. Press the mode button to select shown on the LCD screen. 2. Press the shutter button and the camera will switch off. Energy save mode: In order to conserve battery power, if the camera is not used within 30 seconds, the camera will automatically switch off. Video Mode: To take video clips (AVI format): 1. Press the mode button to select shown on the LCD screen. 2. Press and hold down the shutter button until you want to stop shooting or until the memory is
ページ12に含まれる内容の要旨
to the computer until the entire installation process has been completed. We suggest you follow the step by step instructions that will appear on your screen during the installation process. Software & Camera Driver Installation 1. Insert the CD into your CD-Rom drive. Make sure that your camera is not connected to the computer. 2. For WIN 2000 or WIN XP operating systems - On the “Install your camera software” screen, select your camera model from the drop down list and click the “In
ページ13に含まれる内容の要旨
1. On the “Kids Cam Show and Share Creativity Center" screen, click the “Next” button. 2. Please review the license terms and click the “Agree” button to continue. - 13 -
ページ14に含まれる内容の要旨
3. Let the “Kids Cam Show and Share Creativity Center” installer create the folder where the program will be installed to, and then click “Install”. 4. Click “Finish” to let the “Kids Cam Show and Share Creativity Center” installer finish the installation program. - 14 -
ページ15に含まれる内容の要旨
5. This will automatically launch the Install shield for the camera driver. Click “Next” to continue. 6. Once the program has finished installing you will have to restart your computer. 7. Congratulations!! You have successfully installed the “Kids Cam Show and Share Creativity Center” software, the “PhoTags WebCam Express” and the Camera driver. - 15 -
ページ16に含まれる内容の要旨
Downloading Photos Use the “Kids Cam Show and Share Creativity Center” program to import photos and video clips (AVI files) from your camera. 1. Plug one end of the USB cable into the USB slot on your camera. 2. Plug the other end of the USB cable into a USB port on your computer. 3. Make sure that your camera is connected and turned on. 4. Double-click the “Kids Cam Show and Share Creativity Center” icon that is on your desktop to launch the “Kids Cam Show and Share Creativity Ce
ページ17に含まれる内容の要旨
6. The “Get photos from camera” window will appear. 7. Click the “Browse” button to select a folder to place your photos and videos. 8. Click the “OK” button to proceed. 9. On the next screen, choose where you want to place your photos and video clips and click the “Finish” button to copy the photos to your computer. - 17 -
ページ18に含まれる内容の要旨
10. Open the folder that you selected to view all the pictures and videos in the “Select photos” mode. About Kids Cam Show and Share Creativity Center Kids Cam Show and Share Creativity center will help you get the most of the camera you just purchased. Packed with powerful, yet easy to use features, “Show and Share” will let you manage, enhance, turn your photos into Active Images and share your photos with friends and family. Show and share is packed with fun things to do with
ページ19に含まれる内容の要旨
Slide show- Select anyone of your photo collection and view them as a full screens slide shows. You can even add background music that will play during the slide show. Games- play anyone of the five fun Games including: Word Search, Jigsaw Puzzle, Sliding Puzzle, Mechanical Maze and Word Scramble. With this version of the software you have the ability to purchase additional Workshop projects at anytime. Select any two Workshop projects for FREE: Choose from: • Calendar Creator • Al
ページ20に含まれる内容の要旨
WebCam Express – capturing AVI files Now that you have your camera installed you can use it to capture short movies called AVI files. The length of time you can record an AVI while the camera is connected to your computer will vary, depending on how much hard drive space you will use to save the file. Please take note that these AVI files take up a lot of hard drive space. This is done through the PhoTags WebCam Express program. This next section will walk you though capturing an AVI file
