ページ1に含まれる内容の要旨
now you can see
MANUAL
COLOUR 2.4GHz WIRELESS DVR
SYSTEM WITH TFT-LCD HANDHELD
MONITOR AND INDOOR CAMERA
COLOREZ LE SYSTÈME SANS FIL DE 2.4GHZ DVR AVEC LE MONITEUR
TENU DANS LA MAIN DE TFT-LCD ET LA CAMERA D'INTÉRIEUR
MODEL #: GX5400
ページ2に含まれる内容の要旨
TABLE OF CONTENTS SAFETY PRECAUTIONS..........................................................1 PACKING LIST ......................................................................2 FUNCTIONS AND PARTS LISTS ..........................................2-4 CONFIGURATION ................................................................5 OPERATION......................................................................6-10 MENU SETUP ..................................................................11-15
ページ3に含まれる内容の要旨
PACKING LIST Check to make sure all of the items shown below are included in your Wireless Digital Video Recording System. If something is missing, contact your dealer as soon as possible. \ MPEG4 DVR Colour Camera AV Cables AC Adapters Handheld Monitor FUNCTIONS AND PARTS LIST MPEG4 DVR Handheld Monitor -Side View 1. INPUT SOURCE: RF(wireless camera) or AV cameras. 2 AV IN: 3.5 mm jack for audio/ video line in. 3 AV OUT: 3.5 mm jack for audio/ video line out. 4 VIDEO SYSTEM: Switches from NTS
ページ4に含まれる内容の要旨
FUNCTIONS AND PARTS LIST MPEG4 DVR Handheld Monitor -Front View 1 LCD: 2.5" Colour TFT-LCD 2 POWER LED: Lights up when POWER ON. 3 STATUS LED: Lights up when recording, flashes when storage or otherwise unlit. 4 REC BUTTON: Press to start manual recording. 5 PLAY / PAUSE BUTTON: Press to pause or restart playback. 6 STOP/EXIT BUTTON: Press to stop playback or manual recording. Press to exit the menu. 7 DISPLAY BUTTON: Press to switch screen ON/ OFF or remove status info. 8 VOL UP BUTTON: Pres
ページ5に含まれる内容の要旨
FUNCTIONS AND PARTS LIST MPEG4 DVR Handheld Monitor -Front View 1 IR (infrared) LED: Emit invisible IR light to see in the dark. 2 CAMERA LENS 3 BRACKET HOLE: There is a hole on the top of the camera for ceiling mounting and the bottom for other mounting solutions. 4 ANTENNA 5 LIGHT DETECTOR: CDS Sensor will automatically turn on the IR LEDs when it gets dark. 6 MICROPHONE 7 POWER CONNECTOR 8 CHANNEL SWITCH (ON/ OFF) 9 POWER LED: Indicates that power is being fed to the camera. GX5400: 2.4GHz
ページ6に含まれる内容の要旨
CONFIGURATION 1 RF Camera: Switch INPUT SOURCE to "RF". Audio/ Video Transmission Install camera to a high position in order to avoid from motion interference and reduce effects of transmission quality. When low signals occur, please adjust the antenna to the appropriate angle for the optimum receiver/ transmission performance. 2 AV Line In: Switch INPUT SOURCE to "AV". Lets you connect a wired camera, DVD or other AV source to the monitor. GX5400: 2.4GHz Wireless Digital Video Recording Syst
ページ7に含まれる内容の要旨
OPERATION Power On 1 Before turning the system on, please check the local area video system (NTSC/ PAL). The VIDEO SYSTEM is situated on the right side panel; this setup will affect the video system input and output. NTSC is the standard video system in North America. 2 The power switch is situated on the right side of the device as well. (switch "ON" to power-on and "OFF" to power-off) NOTE: The system auto-detects its cameras when the monitor is turned on. When the status LED flashes, thi
ページ8に含まれる内容の要旨
c. Monitoring Display: Press DISPLAY button to switch between LCD display mode and OSD info. 1 Time Display: System Date and Time. 2 Record Status Display: : Connect the camera to the AV terminal. : Record Resolution, please refer to Record Setup for VIDEO SIZE setup. : Record Quality, please refer to Record Setup for VIDEO QUALITY setup. : Audio Off Record, please refer to Record Setup for AUDIO RECORD setup. 3 CF Card Status: CF Card has not been inserted or malfunction CF Card is proceedi
ページ9に含まれる内容の要旨
Manual Record Repress REC button. Schedule Record After exit playback or menu mode, whether Motion Detection Record the setup has been changed or not, the system will auto re-check the record schedule setup again. 3 Record Display Indicates recording is in progress. Indicates the status of the event that has been triggered. 4. The event status is determined by the system recording, according to the order of priority. The order of priority: Manual Record, Motion Detection and then Schedule Re
ページ10に含まれる内容の要旨
Playback Mode Selectable Playback format: Continuous Playback and Searching Playback. A. Normal Playback: Press button to playback according to the CF card file order recorded. : Normal speed playback. : Fast Rewind and Fast Forward (Speed: x2/ x4/ x8/ x16/ x32). Press button to return to normal speed playback. : During playback, press PAUSE button to pause playback and press it twice to return to playback status. : During pause, press or button to step back one frame or to step forward
ページ11に含まれる内容の要旨
• Withdrawing the CF card during playback, stops playback and enters the monitoring mode. • The device supports playback only to images recorded by our device, other ASF video files are not guaranteed. PC Playback 1. The device uses a CF card as its main storage. The user may read the data stored in the CF card from computers that support CF card reader device. You will need a device capable of reading a CF card. 2. All files (under DV\ASF folder) have approximate sizes of 1MB and file name
ページ12に含まれる内容の要旨
MENU SETUP MAIN MENU 1 MAIN MENU: Item subject. 2 Menu Layer Indication: The device consists of three menu layers. : First Menu Layer (Main Menu) : Second Menu Layer : Third Menu Layer 3 MENU Content: Basic Menu Operations. Press or button, to move the highlight-bar and the cursor ( ). Press MENU/ENTER button, to enter the sub menu ( ). Press STOP button: • Under second or third menu layer, the system will return to the previous menu layer (second layer to first layer or third layer to
ページ13に含まれる内容の要旨
Motion Detection 1 Window setup: 1 Detection Cell: Whole screen is divided into 22x15 square cells. 2 Detection Block: Two or more cells form a block. 3 Cursor: Press [PLAY] button to switch to Select/ Edit mode. 4 Detection Block: Area that is being targeted for motion detection. 2. Cursor Movement: Press [PLAY] button, switch cursor to setup mode (cursor color is black). Press , , , button to move the cursor freely. 3. Detection Area Setup: 1 Press [PLAY] button to select edit detection bloc
ページ14に含まれる内容の要旨
1 Sensitivity Bar: The color black indicates the image variable value and color red indicates the motion detection threshold. 2 MD Energy: Current image variation value. 3 MD Threshold: Press or button, to change the motion detection threshold value. RECORD SETUP Selectable manual or schedule recording, basic setups are shown below: 1 Manual Record: A Video Size/ Frame Rate: B Image Quality: C Audio Record: Enable or disable audio recording. 2 Schedule Record: Records only within the set
ページ15に含まれる内容の要旨
RECORD: Enable or disable the schedule recording (ON/ OFF). SCHEDULE: ab:cd - ab:cd = 24 hour recording and 00:00 - 00:01 = Record of one minute image from 00:00 to 00:01. DURATION: Duration time when motion detection has been triggered (1 SEC/ 5 SEC/10 SEC/ 20 SEC/ 30 SEC) CF CARD FUNCTION 1 CF FULL: LOOP (continuous recording)/ STOP (stop recording). When CF card storage capacity is full, it will start overwriting information from the earliest videos (auto repeating continuous recording).
ページ16に含まれる内容の要旨
POWER ON SETUP 1 CF AUTO REPAIR: CF auto repair on/off during power on. 2 RF CHANNEL: RF channel selection during power on. 3 SPK VOLUME: Speaker volume setup during power on. 4 LCD: LCD on/off during power on RETURN TO FACTORY DEFAULT VALUE TROUBLESHOOTING A Power Q: Why are there no images after power-on? A: a. Power LED is unlit: indicates power failure or insufficient power. b. Power LED is lit: please check the input source (camera or AV). When RF input source is used,
ページ17に含まれる内容の要旨
and the main device have been setup to the same channel. If you have 2 wireless IR cameras, one should select channel 1 & 3 or 2 & 4 to obtain the optimum result. b. Prevent obstructions (caused by wall or steel) between the main device and the camera during transmission. c. Due to wireless network access point and wireless IR camera having the same 2.4GHz frequency. Therefore, please prevent operating the wireless IR camera under wireless networking environment. Q: May one use other brand
ページ18に含まれる内容の要旨
card status info). c. [ CF Card Management] When the recording method is not setup as continuous recording, it stops recording when the storage capacity is full. d. Unable to perform schedule recording, please refer to [Record Mode - Stop Record]. e. If still unable to record contact SVAT technical support at support@svat.com E Playback Q: Why is the device unable to playback? A: a. Check whether the CF card has been inserted (to view the monitoring status, please refer to the bottom right
ページ19に含まれる内容の要旨
MONITOR SPECIFICATIONS Contact support@svat.com if a french version of this manual is required. GX5400: 2.4GHz Wireless Digital Video Recording System 18
ページ20に含まれる内容の要旨
GX5400: 2.4GHz Wireless Digital Video Recording System now you can see www.svat.com
