ページ1に含まれる内容の要旨
X800
Owner’s
Handbook
Picture Frame
ページ2に含まれる内容の要旨
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. IMPORTANT SAFETY INFORMATION operate normally, or has been dropped. in accordance with the instructions, may cause Warning: To reduce the risk of fire or electrical harmful interference to radio communication. Read these instructions. shock, do not expos
ページ3に含まれる内容の要旨
CONTENTS SAFETY INFORMATION ................................................................................................2 INTRODUCTION ...........................................................................................................4 UNPACKING ................................................................................................................4 CONTROLS AND FUNCTIONS ........................................................................................5 REMOTE CONTROL
ページ4に含まれる内容の要旨
IINTRODUCTION UNPACKING Your Digital Picture Frame (DPF) enables you to view digital The carton should contain: • The Photo Frame pictures from either a memory card or from a USB drive. • External Power Adapter The DPF is compatible with the following card formats: SD™ • Remote Control Handset (Secure Disk), MMC™(Multimedia Card), MS™ (Memory Stick) and • Operating Manual SDHC (Secure Disk High Capacity). If any items are missing or damaged, contact your nearest TESCO store
ページ5に含まれる内容の要旨
CONTROLS AND FUNCTIONS 11 1 2 3 4 5 6 7 8 9 10 1. 5V DC Input Socket 2. USB Socket *NAVIGATION KEYS 3. SD/MMC/MS Card Slot 1. Play/Pause; Confirm/Enter; hold to enter main menu 4. Display Screen 2. Previous/Left button 5. Remote Control Sensor 6. Detachable Stand 3. Down button; Rotate photo while playing a slideshow 7. MENU/OPEN OSD Key 4. Next / Right button 8. Navigation Keys* 5. Up button; Back to preview while playing a slideshow 9. EXIT (Return) key 10. ON/OFF Switch 11. Stand Attachment
ページ6に含まれる内容の要旨
REMOTE HANDSET HANDSET KEYS AND FUNCTIONS 1 Press to set the player in and out of Standby. 2 Press to move the cursor upward. 3 Press to move the cursor leftward or select the previous picture. 4 MENU Press to return to the main menu. or rotate a photo clockwise 5 Press to move the cursor downward. or rotate a photo anti clockwise 6 Press to select the previous picture when viewing pictures Switch to the previous page in thumbnail mode. 7 Press to zoom the picture. 8 Press to select
ページ7に含まれる内容の要旨
GETTING STARTED PLACEMENT Remove the mount from the magnetic clip at the rear of the frame. HANDSET PREPARATION Insert it into the attachment hole. Twist the mount clockwise until it Remove the protective strip from the battery compartment to activate attaches firmly to the frame. the battery. After the mount has been attached, you can set the DPF in the If the handset behaves erratically or fails to landscape or portrait orientation. operate the battery should be replaced. 1: Press the c
ページ8に含まれる内容の要旨
CONNECTING POWER If the DPF is being switched on for the first time, or after a default setting reset, you must first select a display language. Use the ( ) or ( ) buttons on the DPF or the buttons on the handset to make your selection. YES Press the button on the DPF or OK on the handset to confirm. NO In the next screen, Use the ( ) or ( ) buttons on the DPF or the buttons on the handset to select YES or NO. ON Press the button on the DPF or OK on the handset to confirm. There ar
ページ9に含まれる内容の要旨
INSTALLING A USB DEVICE OR MEMORY CARD To insert a memory card. Position the card with the cropped corner facing SD Card, etc the bottom of the screen and press gently in. To release a memory card. Grip both sides of the card and gently pull out. When first switched on the pictures will display as a Slide Show. Thereafter the display will depend on the setup you have customised. USB Drive • If you switch on the DPF with a USB drive and a memory card inserted in the frame, the photos on the m
ページ10に含まれる内容の要旨
VIEWING PICTURES When the Zoom is positive (i.e greater than 1) • Press the keys to pan the picture to left or right Switch the ON /OFF switch on the frame to ON or press the button • Press the keys to pan the picture up or down on the handset to bring the frame out of Standby. If there is a memory device inserted the device will start a slideshow. • T o r esume slidesho w pla y : cycle Zoom to Normal and press OK. When the frame detects a memory devices it displays all the viewable
ページ11に含まれる内容の要旨
NAVIGATING A SLIDESHOW VIA THE OSD MENU 3 To zoom in the picture, highlight and press the OK key. During a slideshow: When a picture is magnified Press the OSD key • Press the keys on the handset to pan the picture left / right. The OSD menu appears on the screen and slideshow pauses. • Press the keys on the handset to pan the picture up / down. • Press the OK key again to resume normal slideshow play. 4 To rotate the picture to the left, highlight and press OK. 5 To rotate the pict
ページ12に含まれる内容の要旨
THUMBNAIL MODE Accessing Thumbnail Mode from the Main Menu You can enter thumbnail mode in two ways: Switch the ON /OFF switch on the frame to ON. or During a Slideshow: Press the key. Press the key to bring the frame out of standby Press MENU to display the main menu Press the or key on the handset to select a memory device. Press OK: Thumbnail Mode will deploy. The pictures display in pages of 15 thumbnails. The picture you were viewing is highlighted. Picture details appear at the bo
ページ13に含まれる内容の要旨
SYSTEM SETUP Press or to select the Slide Show Time. Press OK to enter the menu and display the menu contents. Access the Main Menu. The Sliding Show Time. alters the time each slide displays on screen. Select SETUP: Press OK. Press or to select a Slide Show Time. (You can also press the SETUP key on the handset to enter Setup) Press OK to confirm and return to the Setup Menu. Slide Show Time 3s Press or to select Transition Effect. Press OK 3s 3s Transition Effect Press or to sel
ページ14に含まれる内容の要旨
Setting the Language These parameters are all set in the same manner. There are seven set- The language setting affects all the menus and selections in the DPF. tings +3,+2,+1, 0, –1, –2, –3. The changes display immediately. Press or to select Brightness/Contrast/Saturation. Press OK. Englishxx Slide Show Time Press or to select a parameter. Press OK to confirm and return. Transition Effect The Hint Time Language The Hint Time governs the length of time prompts and button displays Bri
ページ15に含まれる内容の要旨
DEFAULT TROUBLESHOOTING This setting returns the DPF to factory settings. If your DPF seems not to be working as well as you might expect, please work through this checklist before returning the product to Tesco. Slide Show Time YES The DPF will not switch on. NO Transition Effect Switch off, Check the power supply connections, switch on again. Language The DPF will not recognise a memory card. Brightness Re-insert the card. You may need to reformat the card. Contrast The DPF will not play pict
ページ16に含まれる内容の要旨
AFTER USE SPECIFICATIONS Power Supply: DC 5V Though you can leave the frame in Standby indefinitely we do not Power adaptor: DC 5V1.0A/AC100-240V recommend this for the following reasons: Picture Format: JPEG, ≤ 8000*8000 pixels (max) • The connected AC adaptor cable could be a source of danger. USB Compliance: USB 2.0 (+1.1 or higher) • You will consume power unnecessarily. Memory Card: SD/MMC/MS/SDHC Otherwise, switch the set off via the POWER switch. Unplug the adap- Weight: 470.6 gra
