ページ1に含まれる内容の要旨
User Manual
1202 /1002
Premium 12/10-Input 2-Bus Mixers with XENYX Mic Preamps,
British EQs and Multi-FX Processor
ページ2に含まれる内容の要旨
2 XENYX 1202FX/1002FX User Manual Table of Contents Thank you ....................................................................... 2 Important Safety Instructions ...................................... 3 Legal Disclaimer ............................................................. 3 Limited Warranty ........................................................... 3 1. Introduction ............................................................... 5 1.1 General mixing console functions ...........
ページ3に含まれる内容の要旨
3 XENYX 1202FX/1002FX User Manual 9. Do not defeat the safety purpose of the polarized UNDERTAKING OR REPRESENTATION. THIS MANUAL Important Safety or grounding-type plug. A polarized plug has two blades IS COPYRIGHTED. NO PART OF THIS MANUAL MAY Instructions with one wider than the other. A grounding-type plug BE REPRODUCED OR TRANSMITTED IN ANY FORM has two blades and a third grounding prong. The wide OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, blade or the third prong are provided for your
ページ4に含まれる内容の要旨
4 XENYX 1202FX/1002FX User Manual “Support” at behringer. com. If your country is not • connection or operation of the unit in any way (3) This warranty does not detract from the seller’s listed, please check if your problem can be dealt with that does not comply with the technical or safety obligations in regard to any lack of conformity of the by our “Online Support” which may also be found under regulations applicable in the country where the product and any hidden defect. “Support” at beh
ページ5に含まれる内容の要旨
5 XENYX 1202FX/1002FX User Manual 1. Introduction as little noise to it as possible. The XENYX Mic Preamp performs this role beautifully, leaving no traces of noise or sound coloration. Interference that The XENYX Series represents a milestone in the development of mixing console could take place at the preamplification level could affect signal quality technology. With the new XENYX microphone preamps including phantom power and purity, and would then be passed on to all other devices, re
ページ6に含まれる内容の要旨
6 XENYX 1202FX/1002FX User Manual 1.3 Before you get started 2. Control Elements and Connectors This chapter describes the various control elements of your mixing console. 1.3.1 Shipment All controls, switches and connectors will be discussed in detail. Your mixing console was carefully packed in the factory to guarantee safe transport. Nevertheless, we recommend that you carefully examine the 2.1 Mono channels packaging and its contents for any signs of physical damage that may have occ
ページ7に含まれる内容の要旨
7 XENYX 1202FX/1002FX User Manual The second value range (+10 to -40 dBu) refers to the line input and shows CLIP its sensitivity. The settings for equipment with standard line-level signals The CLIP-LED’s of the mono channels illuminate when the input signal is driven (-10 dBV or +4 dBu) look like this: While the GAIN control is turned all the way too high, which could cause distortion. If this happens, use the GAIN control to down, connect your equipment. Set the GAIN control to the extern
ページ8に含まれる内容の要旨
8 XENYX 1202FX/1002FX User Manual 2.3 Connector array of the main section Recording: For mastering, using a stereo compressor such as the COMPOSER PRO-XL MDX2600 can be recommended. Use it to custom-tailor the dynamic characteristics of your signal to the dynamic range of the recording equipment you are using. The signal is in this case passed on from the compressor into the recorder. CD/TAPE INPUT The CD/TAPE INPUTs are used to bring an external signal source (e.g. CD player, tape deck, e
ページ9に含まれる内容の要旨
9 XENYX 1202FX/1002FX User Manual POWER 2.5 Digital effects processor The blue POWER LED indicates that the console is powered on. LEVEL INDICATOR The 4-segment display accurately displays the relevant signal level. LEVEL SETTING: To correctly set the gains of the channels, first set the LEVEL controls of the input channels to their center positions. Then use the GAIN controls to increase the Fig. 2.5: Effects section input amplification until signal peaks show 0 dB on the level meter. When r
ページ10に含まれる内容の要旨
10 XENYX 1202FX/1002FX User Manual 3. Applications 3.1 Recording studio UMX490 MIDI sound module CD Player MD Recorder TRUTH B2030A B-2 PRO HPS3000 V-AMP 3 GAIN GAIN Digital Audio Workstation Electric guitar XENYX 1002FX Fig. 3.1: The 1002FX in a recording studio Even though most of the tasks in a studio can nowadays be accomplished using Recording and playback: a computer, a mixing console remains an unavoidable piece of equipment that Once in the mixing console, the recording signal is pre-
ページ11に含まれる内容の要旨
11 XENYX 1202FX/1002FX User Manual 3.2 Live sound REV2496 UMX490 B1520 PRO BX4500H HPS3000 EP2000 MDX2600 Drum Computer BB410 FBQ3102 Bass guitar XM1800S MD Recorder GMX212 CD Player Electric guitar XENYX 1202FX Fig. 3.2: Live application of the 1202FX This illustration shows a typical arrangement for a live setup. Two vocal a recorder/player combo (e. g. a tape deck recorder), the CD/tape to Mix switch microphones and the line outputs of a guitar and a bass amplifier are connected should not
ページ12に含まれる内容の要旨
12 XENYX 1202FX/1002FX User Manual 4. Installation Balanced ¼" TRS connector strain relief clamp 4.1 Mains connection sleeve ring AC POWER IN tip Connect the power supply to the 3-pin mains connector on the rear of the console. Use the AC adapter supplied to connect the console to the mains. The adapter complies with all applicable safety standards. sleeve ground/shield ◊ Please use only the power supply unit provided with the console. ring ◊ Never connect the XENYX to the power supply unit
ページ13に含まれる内容の要旨
13 XENYX 1202FX/1002FX User Manual 5. Specifications Mono Inputs Audio Outputs Microphone Inputs FX Send Type XLR, electronically balanced, Type ¼" TRS connector, unbalanced discrete input circuit Impedance approx. 120 Ω Mic E.I.N. (20 Hz - 20 kHz) Max. output level +22 dBu @ 0 Ω source resistance -132.7 dB / 137 dB A-weighted Main Outputs @ 50 Ω source resistance -130 dB / 133.9 dB A-weighted Type ¼" TRS connector, unbalanced @ 150 Ω source resistance -127.1 dB / 130.9 dB A-weighted Impedan
ページ14に含まれる内容の要旨
14 XENYX 1202FX/1002FX User Manual Dimensions 1202FX Dimensions (H x W x D) 1 5/6 x 9 1/2 x 8 2/ 3" 47 x 220 x 242 mm Weight (Net) approx. 4.6 lbs / 2.1 kg 1002FX Dimensions (H x W x D) 1 5/6 x 7 2/5 x 8 2/ 3" 47 x 189 x 220 mm Weight (Net) approx. 3.5 lbs / 1.6 kg Measuring conditions: 1: 1 kHz rel. to 0 dBu; 20 Hz - 20 kHz; line input; main output; unity gain. 2: 20 Hz - 20kHz; measured at main output. Channels 1 - 4 unity gain; EQ flat; all channels on main mix; channels 1/3 as far left
ページ15に含まれる内容の要旨
15 XENYX 1202FX/1002FX User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION XENYX 1202FX/1002FX Responsible Party Name: MUSIC Group Services US Inc. Address: 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone/Fax No.: Phone: +1 425 672 0816 Fax: +1 425 673 7647 XENYX 1202FX/1002FX complies with the FCC rules as mentioned in the following paragraph: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to p
ページ16に含まれる内容の要旨
We Hear You
