ページ1に含まれる内容の要旨
Professional Disc Jockey Products
PRO SM-3
PROFESSIONAL DJ MIXER
with Infinity Fader™
Owner’s Manual
©2000 Industries http://www.numark.com
ページ2に含まれる内容の要旨
PRO SM-3 i) Power Cord Protection - Power supply cords should be Safety Information routed so that they are not likely to be walked upon or pinched by items placed on or against them. When removing the cord from a power outlet be sure to remove it by holding the plug attachment and not by pulling on the cord. j) Object and Liquid Entry - Take care that objects do not fall into and that liquids are not spilled into the inside of the mixer. k) Cleaning – The appliance should be cleaned only as re
ページ3に含まれる内容の要旨
PRO SM-3 VERY IMPORTANT Please read this entire manual before connecting this unit to your system For optimum performance: • The crossfader is a user replaceable item and subject to wear. Excessive force can wear out the fader quickly. This is not a warranted item. • Never use spray cleaners on the slide controls. Residues cause excessive dirt build-up and this will void your warranty. In normal use slide controls can last for many years. If they malfunction (usually because of a dirty or dus
ページ4に含まれる内容の要旨
PRO SM-3 PRO SM-3 PROFESSIONAL DJ MIXER CONGRATULATIONS! You have purchased the PRO SM-3 Stereo Mixer by . The PRO SM-3 features the patented design Infinity™ fader, that utilizes a beam of light and variable blocker mechanism. The fader itself has no audio or electrical parts attached to wear out. This revolutionary concept achieves the absolute fastest and smoothest cuts with the cleanest sound. The Infinity™ crossfader is user assignable and allows for complete slope variance along with h
ページ5に含まれる内容の要旨
PRO SM-3 TABLE OF CONTENTS Safety Measures 2 Important Information 3 Registration 3 Introduction 4 Description of the Features 6 Quick Setup Diagram 9 Infinity™ Fader 10 Specifications 11 Warranty 12 - The Leader in DJ Technology ©1999 Industries - 5 - http://www.numark.com
ページ6に含まれる内容の要旨
PRO SM-3 5 19 10 8 12 20 11 6 16 23 15 7 24 14 21 4 2 3 1 9 22 25 17 13 18 - The Leader in DJ Technology ©1999 Industries - 6 - http://www.numark.com
ページ7に含まれる内容の要旨
PRO SM-3 MIXER FEATURES INPUTS 16. Headphone Level – adjusts cue volume. 1. Input faders - control individual source levels in the mix. 17. Split/Blend Cue – controls how PFL and Program audio are 2. Hamster Control – reverses direction of the input fader. sent to your headphones. In split mode, the PFL audio can be heard in your left ear and PGM audio can be heard in your right 3. Slope Adjust – sets the rate of volume increase as the Input ear. In blend mode, both PFL and PGM can be heard in
ページ8に含まれる内容の要旨
PRO SM-3 REAR PANEL FEATURES 7 7 7 1 10 6 6 6 14 13 12 11 9 8 5 8 5 8 5 3 4 2 1. Power Switch – to turn unit on after you have turned on 12. Channel Send – The output is determined by pushing the all input devices and before you turn on any devices front panel process selectors next to each channel. attached to the output. Note: this mixer was design to use one processor for 2. Power Supply Input - to plug your power adapter in many channels, If more than one channel is selected than before sw
ページ9に含まれる内容の要旨
PRO SM-3 QUICK SETUP DIAGRAM Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all input sources and processors. Next, connect your microphone and monitor headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio receivers such as tape decks. Plug your mixer into AC power. Now you are ready to switch everything on. IMPORTANT: Always switch on your audio input sources such as turntables or CD players first, then your
ページ10に含まれる内容の要旨
PRO SM-3 Infinity™ Fader The First truly Optical Fader The Infinity Fader™ is a Industries worldwide patented design and completely changes the way audio mixers work. The Infinity™ Fader is the world's first truly 100% optical fader. Previous concepts have always required a stiff shaft to pull electrical contacts along a circuit board. Though these variable resistive faders have been used for many years there have always been some basic drawbacks with the design. Because the fader has to dr
ページ11に含まれる内容の要旨
PRO SM-3 SPECIFICATIONS INPUTS: Line: 10k input impedance 175mV rms sensitivity (for 1.22V output) Mic: 10k input impedance unbalanced 3mV rms sensitivity (for 1.22V output) 85mV rms max input Phono: 47k input impedance 1.4mV rms sensitivity @ 1 KHz (for 1.22V output) OUTPUTS: Line: 9V rms max Headphone Amp: 0.5 watt into 47 Distortion: less than 0.01% SIGNAL TO NOISE RATIOS* (vs. maximum output): Line: Better than 96 dB Mic: Better than 78 dB Phono: Better than 87 dB *JIS - weighted FREQUEN
ページ12に含まれる内容の要旨
Professional Disc Jockey Products LIMITED PRODUCT WARRANTY What is covered and for how long? 1. NUMARK INDUSTRIES LCC ("NUMARK") warrants to the original purchaser that NUMARK'S DJ mixers and amplifiers are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized NUMARK dealer and continuing for the following period of time after that date for (2) Years. The warranty is extended to (3) Years with the comple
