Gianni Industries FDH-200Mの取扱説明書

ページ1に含まれる内容の要旨

FDH-100M / FDH-200M
Electromagnetic Lock
Single Action Door (Out-swinging)
Application for the Electromagnet: FDH-100M (Length :100 CM)
FDH-200M
FDH electromagnetic lock has been designed to embed the
electromagnet in the doorpost and it offers to 600 LBS holding
force. The doorpost is installed in horizontally on the header
of the door-frame. Hence, the doorpost and doorframe will be
shaped into one and provides superior appearance.
This series of doorposts are available in 1 meter and 2 meter

ページ2に含まれる内容の要旨

50 FDH-100M / FDH-200M Electromagnetic Lock Installation Manual 1 2 3 Use 4 mm hexagonal screw 1. Take out the lock, connect the wires Use 3 mm hexagon tool wrench to tighten the electromagnet to operate the screw. (please see the picture on the right) lock. 2. Once the power source is connected, make a hole for the power wires. 5 4 Put in the lock, pull out the Screw in the hexagonal screw. power lines. Wiring Diagram Signal output contact. Withstanding Power: N.C. 3A@12Vdc COM. N.O. Power Powe