ページ1に含まれる内容の要旨
®
C-3 and C-4
FOREMOST IN AIR FILTRATION Crank Lock HEPA Filter Housing
Bulletin PB1604-0107
General Construction
C-3 and C-4 Side Access HEPA/ULPA Filter Housings Housings are 24 inches deep in the direction of air
are designed for use with nominal 12 inch deep flow, (26 inches deep if it has a 4” prefilter section.)
HEPA/ULPA filters. They are factory-assembled and are constructed in your choce of frame materials.
flanged units suitable for gel sealed or gasket sealed Flanges are furnished for
ページ2に含まれる内容の要旨
Cfm Capacities and Dimensions Using Standard Alpha 95 and Alpha Cell and High Capacity Alpha 2000 HEPA Filters Face Width Code Height Velocity 1W 2W 3W 4W 5W 6W 7W 8W Code (fpm) CFM Capacity 1H 500 1000 4000 6000 8000 10000 12000 14000 16000 275 1100 2200 3300 4400 5500 6600 7700 8800 375 1500 3000 4500 6000 7500 9000 10500 12000 500 2000 4000 6000 8000 10000 12000 14000 16000 2H 500 4000 8000 12000 16000 20000 24000 28000 32000 275 2000 4000 6000 8000 10000 12000 14000 1600 375 3000 6000 9000 1
ページ3に含まれる内容の要旨
Model Number Development C3G - 1H1W - GGF - GLV - D1 Housing Material: Filter type: C3G - Gasket Seal GLV: Galvanized steel C4F - Fluid Seal 304: Type 304 S/S 304L: Type 304 L S/S Housing Size: Filters High x Wide 316: Type 316 S/S (See Chart) 316L: Type 316L S/S Filter Size: ALZ - 14 gauge aluminized (non-standard) CCF - 12”x12”x11-1/2” HEPA Filter 2CCF -12”x12”x11-1/2” HEPA filter with a 2” prefilter 4CCF -12”x12”x11-1/2” HEPA filter with a 4” prefiler CGF - 12”
ページ4に含まれる内容の要旨
Construction Details Notes: 1. Standard construction is 14 ga. galvanized steel housing and doors leak tight to +/- 3.0 in. w.g. 2. Maximum operating temperature for standard C-3 and C-4 Housings is 250°F. High temperature C-3 and C-4 Housings are available for 400°F continuous and 500 °F intermittent duty. Guide Specifications 1.0 HEPA/ULPA Filter Housings hand-operated arm that moves the filter so its gel- filled channel mates with the internal housing knife 1.1 Side access HEPA filter hous