ページ1に含まれる内容の要旨
DVD Player
DVD-1080P8
www.samsung.com
AK68-01503A-01
ページ2に含まれる内容の要旨
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the pola
ページ3に含まれる内容の要旨
Precautions This symbol indicates that This symbol indicates that there are dangerous voltage consisting a risk important operating and of electric shock is present within maintenance instructions in the this unit. literature accompanying this unit. Do not install this equipment in a confined space such as a bookcase or similar unit. WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. Note to CATV system installer : This reminder is provided
ページ4に含まれる内容の要旨
CAUTION THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. Note: • This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere. • This DVD player is designed and manufactured to respond to the Region Management Information. If the Region number of a DVD disc
ページ5に含まれる内容の要旨
Before you start Accessories Remote Batteries for User’s Manual RCA Phone Control Remote Control Cable (AK68-01503A) (AAA Size) (AC39-42001U & (AK59-00084J) AC39-22017Z) (AC43-12002H) Install Batteries in the Remote control 1 Open the battery cover on the back of the remote control. 2 Insert two AAA batteries. Make sure that the polarities (+ and -) are aligned correctly. 3 Replace the battery cover. If the remote control doesn’t operate properly: - Check the polarity + - of the batteries.
ページ6に含まれる内容の要旨
TABLE OF CONTENTS Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Chapter 1: Setup General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ7に含まれる内容の要旨
Setup Chapter 1 SETUP Note General Features - Discs which cannot be played with this player. Excellent Sound • DVD-ROM • DVD-RAM Dolby Digital, a technology developed by Dolby • CD-ROM • CDV Laboratories, provides crystal clear sound reproduction. • CDI • CVD • Super Audio CD(except CD layer) Screen Both regular and widescreen(16:9) pictures can be • CDGs play audio only, not graphics. viewed. - Ability to play back may depend on recording conditions. Slow Motion An important scene can be view
ページ8に含まれる内容の要旨
SETUP Disc Type and Characteristics This DVD player is capable of playing the following types of discs with the corresponding logos: Disc Types (Logos) Recording Types Disc Size Max. Playing Time Characteristics - DVD contains excellent sound and Single-sided 240 min. DVD 5” video due to Dolby Digital and Double-sided 480 min. Audio MPEG-2 system. + - Various screen and audio functions Video Single-sided 80 min. 3 1/2” can be easily selected through the Double-sided 160 min. on-screen menu. AU
ページ9に含まれる内容の要旨
Setup SETUP Description Front Panel Controls 2 4 1 3 8 7 6 5 1. DISC TRAY 6. STOP ( ) Place the disc here. Stops disc play. 2. OPEN/CLOSE ( ) 7. SKIP ( ) / SEARCH Press to open and close the disc tray. Use to reverse skip a scene or music. 3. DISPLAY 8. STANDBY/ON ( ) Operation indicators are displayed here. When STANDBY/ON is pressed on, the indicator goes out and the player is turned on. 4. PLAY/PAUSE ( ) Begin or pause disc play. 5. SKIP ( ) / SEARCH Use to forward skip a scene or music. Fro
ページ10に含まれる内容の要旨
SETUP Rear Panel 2 1 23 4 5 1. AUDIO OUT JACKS 4. COMPONENT VIDEO OUT JACKS - Use audio cables to connect to the Audio input jacks of - Use these jacks if you have a TV with Component your television or audio/video receiver Video in jacks. These jacks provide PR, PB and Y video. - If P-SCAN is set to “ON” in Video Output of the Setup 2. DIGITAL AUDIO OUT JACKS Menu, progressive scan mode will work. - Use either an optical or coaxial digital cable to connect - If I-SCAN is set to “ON” in Vide
ページ11に含まれる内容の要旨
Setup SETUP Tour of the Remote Control 7. INSTANT REPLAY Button This function is used to replay the previous 10 seconds of a movie from the current position 17 1 8. SKIP Buttons ( ) / 18 2 Use to skip the title, chapter or track. 9. STOP Button ( ) 3 19 10. TV VOL (+, -) Buttons 20 Control volume. 11. MENU Button 4 Brings up the DVD player’s menu. 12. ENTER/ Buttons / , / This button functions as a toggle switch. 21 13. EZ VIEW Button 22 5 The aspect ratio of a picture can easily be adjusted
ページ12に含まれる内容の要旨
Chapter 2 CONNECTIONS Choosing a Connection The following shows examples of connections commonly used to connect the DVD player with a TV and other components. Before Connecting the DVD Player - Always turn off the DVD player, TV, and other components before you connect or disconnect any cables. - Refer to the user’s manual of the additional components (such as a TV) you are connecting for more information on those particular components. Connecting to a TV with HDMI Jack HDMI provides the best p
ページ13に含まれる内容の要旨
Connections CONNECTIONS HDMI VIDEO Specifications When you press the HDMI SEL. button, the 480p, 720p, 1080i and 1080p resolutions are selected in order. The first press of the HDMI SEL. button, brings up the current resolution. The second press allows you to change the HDMI output resolution. - Depending on your TV, certain HDMI output resolutions may not work. - Please refer to the user's manual of your TV. - If an HDMI or HDMI-DVI cable is plugged into TV, the DVD player’s output is set to HD
ページ14に含まれる内容の要旨
CONNECTIONS Connecting to a TV (Progressive) - Connecting to your TV using Component video cables. The 480p resolution is possible with this connection. - What is "Progressive Scan"? Progressive scan has twice as many scanning lines as the interlace output method and provides better and clearer picture quality. 1 Using Component video cables (not included), connect the COMPONENT VIDEO OUT jacks on the rear of the DVD player to the COMPONENT IN jacks of your TV. 2 Using the audio cables, connect
ページ15に含まれる内容の要旨
Connections CONNECTIONS Connecting to a TV (Interlace) - Connecting to your TV using Component video cables. The 480i resolution is possible with this connection. - This is the best available connection if your TV is not capable of receiving a Progressive Scan signal. - You will enjoy excellent quality and accurate color reproduction images. Component video separates the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are deliv
ページ16に含まれる内容の要旨
CONNECTIONS Connecting to a TV (Video) 1 Using Video/Audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT jacks on the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN jacks of your TV. 2 WHITE Turn on your DVD player and TV. RED YELLOW Video Cable (Included) 3 Audio Cable WHITE RED YELLOW (Included) Set the Video Output to I-SCAN in the Display Setup menu. (See pages 51 to 53). You can also use the VIDEO SEL. button to change the Video Output mode. (See page 1
ページ17に含まれる内容の要旨
Connections CONNECTIONS Connecting to an Audio System (2 Channel Amplifier) 1 Using the audio cables, connect the AUDIO (red and white) OUT jacks on the rear of the DVD player to the AUDIO (red and white) IN jacks of the Amplifier. 2 Using the video signal cable(s), connect the HDMI, WHITE COMPONENT or VIDEO OUT jacks on the rear of the DVD player to the VIDEO, COMPONENT or HDMI-DVI IN jack of RED your TV as described on pages 14 to 16. 3 Audio Cable Turn on your DVD player, TV, and Amplifier. (
ページ18に含まれる内容の要旨
CONNECTIONS Connecting to an Audio System (Dolby digital, MPEG2 or DTS Amplifier) 1 If using an Optical cable (not included), connect the DIGITAL AUDIO OUT (OPTICAL) jack on the rear of the DVD player to the DIGITAL AUDIO IN (OPTICAL) jack of the Amplifier. If using a Coaxial cable (not included), connect the DIGITAL AUDIO OUT (COAXIAL) jack on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) jack of the Amplifier. 2 Using the video signal cable(s), connect the HDMI, COMPONENT or VID
ページ19に含まれる内容の要旨
Basic Functions ▼ Chapter 3 BASIC FUNCTIONS Playing a Disc Before Play - Turn on your TV and set it to the Video Input your DVD player is connected to with your TV’s remote control. - If you connected the DVD player to an external Audio System, turn on your Audio System and set it to the correct Audio Input. After plugging in the player, the first time you press the DVD POWER button, the screen to the right appears: If you want to select a language, press a NUMBER button. (This screen will only
ページ20に含まれる内容の要旨
▼ ▼ ▼ BASIC FUNCTIONS Note 4 - If the player is left in the stop mode for more than Stopping Play one minute without pressing any buttons, a Press the STOP ( ) button screen saver will be activated. Press the PLAY during play. ( ) button to resume normal play. - If the player is left in the stop mode for more than 30 minutes, the power will automatically turn off. 5 Removing the Disc Press the OPEN/CLOSE () button. Screen stops, no sound. To resume, press the PLAY ( ) button once 6 again. Pausin
