ページ1に含まれる内容の要旨
User’s Manual
DVD-V6500K
DVD-V7000K
STANDBY/ON OPEN/CLOSE
PAL/NTSC
AK68-00648K-00 www.samsung.com
ページ2に含まれる内容の要旨
Safety Instructions The following illustrations represent precautions. The lightning bolt is a warning sign alerting you to dangerous voltage inside the product. DO NOT OPEN THE DVD-VCR. Refer to service personnel. DO NOT expose the DVD-VCR to extreme temperature DO NOT expose the DVD-VCR to direct sunlight. conditions (below 5°C and above 40°C) or to extreme humidity conditions (less than 10% and more than 75%). DO NOT place any objects on the DVD-VCR or remote control. DO NOT expose the DVD
ページ3に含まれる内容の要旨
Getting Started Disc Type and Characteristics This DVD-VCR is capable of playing the following types of discs with the corresponding logos: Recording Types Disc Size Max. Playing Time Characteristics Disc Types (Logos) - DVD contains excellent sound and Single-sided 240 min. DVD 12 Cm video due to Dolby Digital, DTS and Double-sided 480 min. Audio MPEG-2 system. + - Various screen and audio functions Video Single-sided 80 min. can be easily selected through the on- 8 Cm Double-sided 160 min. scr
ページ4に含まれる内容の要旨
Playing Back Playing Back Contents Playing a Cassette . . . . . . . . . . . . . . . . . . . . . 21 Adjusting Picture Alignment Manually . . . . . . . 21 Selecting the Audio Output Mode (DVD-V7000K) . 22 Playing a Cassette in Slow Motion . . . . . . . . . . 22 Playing a Sequence Frame by Frame . . . . . . . 22 Getting Started Getting Started Playing a Sequence at Variable Speeds . . . . . 22 Searching for a Specific Sequence . . . . . . . . . 23 Using the Tape Counter . . . . . . . . . . . .
ページ5に含まれる内容の要旨
Getting Started Overviews Front View of the DVD-VCR 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1. DVD DECK 10. TRACKING BUTTON 2. OPEN/CLOSE BUTTON 11. FRONT PANEL DISPLAY 3. VIDEO CASSETE COMPARTMENT 12. DVD/VCR SELECTION BUTTON 4. EJECT BUTTON 13. ECHO VOLUME 5. STANDBY/ON BUTTON 14. MIC VOLUME 6. PROGRESSIVE SCAN MODE BUTTON 15. MIC JACK 7. EZ VIEW BUTTON 16. P
ページ6に含まれる内容の要旨
Accessories Inserting Batteries in the Remote Control You have just purchased a SAMSUNG DVD-VCR. You must insert or replace the batteries in the remote Together with your DVD-VCR, you will find the following control when you: accessories in the box. • Purchase the DVD-VCR • Find that the remote control is no longer working correctly STANDBY/ON OPEN/CLOSE Push the tab in the direction of the arrow to 1 release the battery compartment cover on the rear of the remote control. Remote Batteries for O
ページ7に含まれる内容の要旨
Getting Started 11. OK … … / † † , œ œ / √ √ Tour of the Remote Control Used to control the cursor in the on-screen menu and confirm your choice. 12. SPEED Used to select the recording speed. STANDBY/ON OPEN/CLOSE 13. REC ( ) 1 16 Used to make a recording on cassette. 2 14. TIMER 17 15. ANGLE 18 Used to access various camera angles on a DVD. 3 IPC (Intelligent Picture Control) 19 Used to adjust the sharpness of the picture. 4 20 5 16. OPEN/CLOSE 21 6 Used to open and close the disc and vid
ページ8に含まれる内容の要旨
Quick Overview Connections A Quick overview presented in this guide will give you enough information to start using the DVD-VCR. Quick Overview Connecting DVD-VCR to the TV using the Audio/Video Cable Connecting DVD-VCR to the TV using the S-Video Cable (DVD Only) Connecting DVD-VCR to the TV using the Component Video Cable (DVD Only) Connecting to an AV amplifier with the digital input jack Connecting External Devices • Quick Overview . . . . . . . . . . . . . . . . . . . . 8 • Connecting DV
ページ9に含まれる内容の要旨
Connections Connecting DVD-VCR Connecting DVD-VCR to to the TV using the the TV using the Audio/Video Cable S-Video Cable (DVD Only) You can connect your DVD-VCR to the television You will enjoy high quality images. S-Video seperates using the Audio/Video cable if the appropriate input the picture element into black and white(Y) and is available on the television. You thus: colour(C) signals to present clearer images than regular • Obtain better quality sound and pictures video input mode. • Si
ページ10に含まれる内容の要旨
Progressive Scan ❚ Connecting DVD-VCR to the If the TV connected supports Progressive Scan, press the PROGRESSIVE button on the front panel TV using the Component in stop mode. • The Progressive Scan feature is only available for DVD. Activate it in DVD Stop mode. Video Cable (DVD Only) • The message “Press OK to confirm Progressive scan mode. Otherwise press RETURN.” will be Your TV must support progressive scan input to allow displayed. If you want Progressive scan mode, you to watch comp
ページ11に含まれる内容の要旨
Connections Connecting to an AV Connecting External amplifier with the Devices digital input jack To take full advantage of the movie theater experience This allows you to connect your DVD -VCR to other that DVD offers, you may want to connect your DVD- external devices and view or record their outputs. VCR to a complete Surround Sound system, including • Connecting a VCR, Set-Top Box(STB) or DVD-VCR an A/V Receiver and six Surround Sound speakers. to the AUDIO/VIDEO LINE IN 1 jacks. If your A/
ページ12に含まれる内容の要旨
Copying from DVD to VCR The DVD-VCR allows you to copy the contents of a DVD to a VHS tape with a press of the COPY button. • If the DVD you are attempting to copy is copy protected, you will not be able to copy the disc. It is not permitted to copy Macrovision® encoded DVDs. Insert the disc you wish to copy in the DVD deck 1 and close the drawer. Insert a blank VHS videotape into the VCR deck. 2 Press the COPY button on the DVD-VCR front 3 panel. • The DVD will go into Play mode and
ページ13に含まれる内容の要旨
Settings Setting the Date and Time Settings Your DVD-VCR contains a 24-hour clock and calendar used to: • Automatically stop programme recording • Preset your DVD-VCR to record a programme automatically You must set the date and time when : • You purchase the DVD-VCR. • Do not forget to reset the time when you change clocks from winter to summer time and vice versa. Press the MENU button, then press the OK or 1 √ button. Setup √ √ SETUP Language : English √ √ Clock DVD √ √ User Set √ √ Auto Po
ページ14に含まれる内容の要旨
Press the œ or √ button to select the hour, 3 minutes, day, month, and year. Setting the Menu The selected option is highlighted. Press the … or † button to set them, then press the OK button Language The day of the week is displayed automatically. Clock Set SETUP Time Date Year DVD Press the MENU button, then press the OK or 12 : 00 01 / JAN / 2005 SAT 1 √ button. VCR The Language is highlighted. FUNC Setup OK RETURN MENU Language : English √ √ SETUP Clock √ √ • Yo
ページ15に含まれる内容の要旨
VCR Functions Selecting the Colour Mode VCR Before recording or playing back a cassette, you can select the required system standard. Functions Otherwise, the system automatically selects the reception standard when you select AUTO. • When you playback an NTSC-recorded tape on this DVD-VCR make a setting on the colour system according to your TV. If your TV is a PAL system only TV, set NTPB. If your TV is multi system TV (NTSC 4.43 compatible), set NT4.43 and you can record NT4.43. Press the M
ページ16に含まれる内容の要旨
Intelligent Picture Auto Power off Control This feature allows you to adjust the sharpness of the This feature automatically turns off your DVD-VCR if no image automatically, according to your own preferences. signal is received and you do not press any button for the selected time. During playback press the MENU button, then 1 Press the OK or √ button. Press the MENU button, then press the OK or √ 1 button. Press the … or † button to select User Set, then 2 Press the OK or √ button. Setup The
ページ17に含まれる内容の要旨
VCR Functions Screen Messages Selecting the Cassette Type Your DVD-VCR displays most information both the If you wish to use the tape counter to display the time remaining on a cassette, you must indicate the type of DVD-VCR and the television. cassette inserted. You can choose to display or hide this information on the television screen (except for the search, programming menu and timer functions, which cannot be hidden). Press the MENU button, then press the … or † 1 button to select VCR. Pres
ページ18に含まれる内容の要旨
Repeat Play S-VHS Play You can set repeat play to repeat the tape continuously Press the MENU button. from beginning to end. 1 Press the … or † button to select VCR. Press the MENU button. VCR Setup 1 Press the … or † button to select VCR. Tape Select : E180 √ √ SETUP Repeat Play : Off √ √ DVD VCR Setup S-VHS : Off √ √ Tape Select : E180 √ √ SETUP VCR Repeat Play : Off √ √ DVD FUNC S-VHS : Off √ √ VCR OK RETURN MENU FUNC OK RETURN MENU Press
ページ19に含まれる内容の要旨
VCR Functions Selecting the Protecting a Recorded Cassette Recording Speed You can record a cassette at two different speeds: Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot • SP (Standard Play) record on the tape. • LP (Long Play) In Long Play modes: • Each cassette lasts twice as long If you wish to protect a cassette, break off the tab • The recording is of a slightly lower quality 1 using a small screwdriver. Press the SPEED button
ページ20に含まれる内容の要旨
Recording from Another Using the Assemble VCR or Camcorder Edit Function You can copy a cassette to your DVD-VCR from another This function allows you to start a new recording at a video source, such as another VCR or a Camcorder etc. specific position on the cassette while maintaining a very smooth scene change. • It is an infringement of copyright laws to copy prerecorded cassettes or to re-record them in any form without the permission of the owners of the corresponding copyright. Insert t
