ページ1に含まれる内容の要旨
D00816600A
DVD/DVD-A/SACD/CD PLAYER
OWNER’S MANUAL ............... 2
MANUEL DU PROPRIÉTAIRE ... 46
ページ2に含まれる内容の要旨
WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- CAUTION SERVICEABLE PARTS INSIDE. REFER SERVICING TO < DO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO QUALIFIED SERVICE PERSONNEL. EXPOSE THE ELECTRONICS. NO USER SERVICEABLE PARTS ARE WITHIN! The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the < IF YOU ARE E
ページ3に含まれる内容の要旨
ENGLISH This product has been designed and manufactured according to IMPORTANT (for U.K.Customers) FDA regulations “title 21, CFR, chapter 1, subchapter J, based on the Radiation Control for Health and Safety Act of 1968“, and is DO NOT cut off the mains plug from this equipment. If the plug classified as class 1 laser product. There is not hazardous invisible fitted is not suitable for the power points in your home or the laser radiation during operation because invisible laser radiation cable
ページ4に含まれる内容の要旨
Contents Thank you for choosing TEAC. Read this manual carefully to get the best performance from this unit. Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Digital output formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Test tone length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Before Use . . . . . . . . . . . .
ページ5に含まれる内容の要旨
ENGLISH Features The world’s first VRDS mechanism for DVD Unsurpassed design and features and SACD players, incorporating a The UX-1 is truly the most advanced universal disc player to magnesium turntable and a SS400 bridge date. Separation of power supplies for each major function (digital audio, DAC circuitry, analog audio) ensures total The VDRS mechanism completely eliminates any vibration of fidelity. The DACs for video and audio have sub-ground the disc itself, thanks to the full-diameter
ページ6に含まれる内容の要旨
Before Use DO NOT MOVE THE UNIT DURING PLAYBACK What’s in the box During playback, the disc rotates at high speed. Do NOT lift or Please confirm that the following accessories are in the box move the unit during playback. Doing so may damage the when you open it. disc or the unit. Remote control unit x 1 WHEN MOVING THIS UNIT Batteries (AA, R6, SUM-3) x 2 When changing places of installation or packing the unit for Felt sheet x 3 moving, be sure to remove the disc and return the disc tray to Po
ページ7に含まれる内容の要旨
ENGLISH Restoring factory settings “DTS” and “DTS 96/24” are trademarks of Digital Theater Systems, Inc. If you have made a lot of changes to the setup, and want to restart from a known set of options, restore the unit to the Manufactured under license from Dolby Laboratories. factory settings as follows: “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. “Super Audio CD” is a registered trademark. This product incorporates copyright protection technology that is
ページ8に含まれる内容の要旨
Discs Region Number of DVD Video discs: Type of Discs That Can be Played on This DVD players and discs are designed with region numbers that System dictate the regions in which a disc can be played. If the region This player can playback discs bearing any of the following logos: number on the disc you want to play does not match the region number of your DVD player, you will not be able to play the disc. In that case, an error message will appear on the screen. DVD Video: • Single-sided or doubl
ページ9に含まれる内容の要旨
ENGLISH < Always place the disc on the disc tray with the label side Following discs cannot be played with this uppermost. (Compact discs can be played or recorded only on unit: one side.) • CD-G, Data part of CD-EXTRA, PHOTO CD, CD-ROM and < To remove a disc from its storage case, press down on the DVD-ROM discs center of the case and lift the disc out, holding it carefully by • discs recorded in a color system other than PAL or NTSC the edges. • illegally produced discs • scratched discs • dis
ページ10に含まれる内容の要旨
DVI cable RCA video cable S-Video cable BNC coaxial cables RCA cable Connection to a TV CAUTION: < Switch off the power to all equipment before making connections. < Read the instructions of each component you intend to use with this unit. < Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord or speaker cables. B C D E A If you are not using an Only use one method of video connection audio amplifier, con
ページ11に含まれる内容の要旨
ENGLISH < Adjust the video aspect ratio to match that of the television C Component video output terminals (see page 38) . Use commercially available BNC coaxial cables to connect the unit to the component video inputs of a suitably- < If the component video terminals or the D1/D2 terminal are equipped television or monitor to enjoy a high-quality used to connect the unit to a television with progressive- picture. Use these terminals in preference to S-Video or scan capabilities, the output can
ページ12に含まれる内容の要旨
Supplied power cord RCA coaxial cable optical digital cable BNC coaxial cable RCA cable XLR cable Connections to an amplifier, etc. CAUTION: < Switch off the power to all equipment before making connections. < Read the instructions of each component you intend to use with this unit. < Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord or speaker cables. Stereo amplifier Master clock generator (G-0s, etc
ページ13に含まれる内容の要旨
ENGLISH F H Analog audio output terminals Word sync connector Use either the XLR or RCA (pin) FRONT terminals for analog This allows the use of an externally-generated word clock stereo output. connection, using a commercially available BNC coaxial If your amplifier has balanced XLR analog audio inputs, cable. connect the XLR jacks on the unit to the amplifier’s XLR Devices producing such a suitable clock signal include jacks, otherwise use the RCA (pin) connections. external D-A converters, or
ページ14に含まれる内容の要旨
Front panel features A B C D E F G H I J A POWER Use this to turn the unit on and off. When the unit is on, the ring surrounding the button lights up. The equipment draws nominal non-operating power from the AC outlet with its POWER switch in the OFF position. B CLOCK MODE Use this to select an external word sync source connected to the WORD SYNC connector on the rear panel. Also use this to select the 4% DOWN mode. C Remote control sensor Receives signals from the remote control unit. Point the
ページ15に含まれる内容の要旨
ENGLISH Front panel display g a c e b d f h i q p j s r o n m l k a m Disc type indicator GUI indicator Shows the type of disc currently loaded. Lights to show that the GUI is being displayed through the video outputs. b GROUP indicator n Message area Indicates that the group number of a DVD audio disc is being shown. Alphanumeric display to show times, titles, status messages, etc. c TITLE indicator o REPEAT indicator Indicates that the title of a DVD disc is being shown. Lights when repeat pla
ページ16に含まれる内容の要旨
Understanding the remote control unit A Number buttons Use these for selecting tracks by number, etc. B DVI ON/OFF Use this to turn DVI video output on and off. C VIDEO ON/OFF Use this to turn all video on and off. D 2CH/MULTI Use this to switch between two-channel (stereo) and multi- channel surround audio output. E PLAY AREA Use this with DVD audio and SACD discs to select the O playback area. A F SLOW ( / ) Use these for slow motion video playback. P G SCAN (m/,) Q B Use these for fast scanni
ページ17に含まれる内容の要旨
ENGLISH Q DISPLAY How to insert the batteries Use this button to change the display mode. Remove the cover of the remote control unit with a screwdriver. After checking the polarity (+/_) of two AA R FL DIMMER button batteries, insert the batteries, replace the cover and replace Use this button to change the brightness of the front panel the screws. display. S REPEAT Use this button to set the repeat playback mode. T PROGRAM Use this button when programming playback order. U GROUP/TITLE Use the
ページ18に含まれる内容の要旨
DVD VCD CD SACD DVD-A Playback 5 Press the PLAY button to start playback, if playback has 3 2 4 not started automatically. 1 5 If a menu is shown on screen (some DVD or video discs may show such a menu), see the next section. 1 Turn on the power using the POWER button on the main unit. On-screen menu An on-screen menu is shown when a DVD or video CD with playback control (PBC) content is loaded. The way in which the menu works may differ from disc to disc. The button and the display ligh
ページ19に含まれる内容の要旨
ENGLISH Playback control (with PBC enabled) video CDs Stopping playback With these discs, the number buttons can sometimes be used to select menu items. Press the STOP button (the ring surrounding the STOP button on the main unit lights). Jump between pages of multi-page menus (on some video CDs) with the SKIP buttons (.//). With a video DVD or video CD, the unit enters resume mode < Pressing RETURN during playback returns to the menu of a (see the next section). Pressing STOP once again stops P
ページ20に含まれる内容の要旨
DVD DVD-A DVD VCD CD SACD DVD-A Selecting groups and titles Selecting a chapter or track Use the number button to select tracks or chapters for Use the remote control unit’s GROUP/TITLE buttons ( / ) playback. Use the +10 button to enter the first digit of to change titles and groups on DVD media. numbers greater than 9 (repeated presses show 1-, 2-, 3- etc.) If pressed during playback, these buttons start playback at the and the single digit buttons (0 through 9) for the second select
