ページ1に含まれる内容の要旨
HW994SJ-AHP_BUSAJJK
DVD DIGITAL THEATER SYSTEM
TH-G51
Consists of XV-THG51, SP-THG51F,
SP-THG61C, SP-THG50W and RX-THG51
TUNING TUNING
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
iPhone is a trademark of Apple Inc.
For Customer Use:
Enter below the Model No. and
Serial No. which are located on
INSTRUCTIONS
the rear of cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT2053-001A
[J]
ページ2に含まれる内容の要旨
CAUTION: The apparatus shall not be exposed to water CAUTION (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION concerning the Power Cord CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK Most devices are recommended be placed on a DO NOT REMOVE COVER (OR BACK) dedicated circuit; NO USER-SERVICEABLE PARTS INSIDE That is, a single outlet circuit which powers only that REFER SERVICING TO QUALIFIED SE
ページ3に含まれる内容の要旨
NOTE TO CABLE/TV INSTALLER: This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may c
ページ4に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installation, use, and servicing. This product does not contain any pa
ページ5に含まれる内容の要旨
Contents LOCK (PARENTAL CONTROL) . . . . . . . . . .14 Introduction . . . . . . . . . . . . . . . . . . .2-5 • Initial Setting the Area Code . . . . . . . . .14 About the Symbol Display . . . . . . . . . . . . . .2 • Rating . . . . . . . . . . . . . . . . . . . . . . . . . .14 Symbol Used in this Manual . . . . . . . . . . . . . . .2 • Password . . . . . . . . . . . . . . . . . . . . . . . .14 Screen Saver . . . . . . . . . . . . . . . . . . . . . . . . . . .2 • Area Code . . . . . . . . . .
ページ6に含まれる内容の要旨
Introduction To ensure proper use of this product, please read this Notes on Discs owner’s manual carefully and retain it for future reference. Handling Discs This manual provides information on the operation Do not touch the playback side of the disc. Hold the and maintenance of your DVD player. Should the unit disc by the edges so that fingerprints do not get on require service, contact an authorized service location. the surface. Never stick paper or tape on the disc. About the Symbol Dis
ページ7に含まれる内容の要旨
Types of Playable Discs Regional Code DVD This unit has a regional code printed on the rear of the (8 cm / 12 cm disc) unit. This unit can play only DVD discs labelled as the same as the rear of the unit or “ALL”. Audio CD (8 cm / 12 cm disc) Notes on Regional Codes • Most DVD discs have a globe with one or more In addition, this unit plays DVD±R/RW and CD-R/RW, numbers in it clearly visible on the cover. This number must match your unit’s regional code or the Dual disc that contains audio tit
ページ8に含まれる内容の要旨
Front Panel abc defghi j a 1 1/ /'' (STANDBY/ON) g X X (PAUSE) Switches the unit ON and OFF. Pause playback. FM MODE b Disc Tray This will change the tuner from stereo to mono Insert a disc here. and usually improve the reception. c AUDIO IN h . (SKIP) The AUDIO IN port means you can connect a Returns to the beginning of current chapter or audio device to play through the surround sound track or go to the previous chapter or track. speakers. (SCAN) During playback, press and hold this button
ページ9に含まれる内容の要旨
Remote Control 0-9 numerical buttons: Selects AUDIO (1 1/ /'') numbered options in a menu. Switches the unit ON and OFF. FUNCTION SURROUND Selects the surround mode. Selects the function (DVD/CD, FM) INPUT SCAN MODE Sets the output resolution for HDMI Changes the input source ( AUX, and COMPONENT VIDEO OUT AUX OPT, AUDIO IN, OSD IPOD, jacks. IPOD, HDMI IN) SLEEP SUBTITLE Sets the System to turn off Selects a subtitle language (DVD). automatically at a specified time. PROG./MEMO. DIMMER Accesse
ページ10に含まれる内容の要旨
Installation and Setup Video connection TV Connection Connect the MONITOR OUT jack from the DVD/CD Make one of the following connections, depending on Receiver to the VIDEO IN jack on the TV using the the capabilities of your existing equipment. video cable (V). Component Video connection Tips: Depending on your TV and other equipment you Connect the COMPONENT VIDEO OUT jacks from wish to connect, there are various ways you could the DVD/CD Receiver to the corresponding jacks on connect the
ページ11に含まれる内容の要旨
iPod connection (I) Optional Equipment Connection Connect the iPod and the unit with iPod docking Rear of DVD/CD Receiver station.(I). iPod (not supplied) A I (supplied) O H OUT IN (not VIDEO supplied) AUDIO (L) AUDIO (R) Rear of DVD/CD Receiver OPTICAL OUT Notes: Auxiliary device DVD Player • The connector plug is protected with a cover when (or Digital it is first purchased. Please remove the cover Device, etc) before operationg the unit. • When the iPod is not connected, insert the termi
ページ12に含まれる内容の要旨
HDMI Connection HDMI compatible TV HDMI About HDMI HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for an easy all- digital output to an HDMI or DI-equipped TV. H Connection to an HDMI TV requires an HDMI cable while connection to a DVI-equipped TV requires a DVI adapter besides a HDMI cable. HDMI has the capability to support standard, enhanced, or high-definition video plus standard to Rear of DVD/CD Receiver multi-channel surround-sound
ページ13に含まれる内容の要旨
Setting an ID of Wireless Setup the wireless system When the unit is manufactured, the ID is already set. Note: If an interference occurs or you use a new Wireless If there is a product with a strong electromagnetic field Receiver, an ID should be set again. nearby, interference may occur. (Ex : Micro wave oven) 1. Turn on the main unit and Wireless Receiver. LED indicator of Wireless Receiver 2. Press and hold STOP(x) on the front of unit and MUTING on the remote control. * LED indicator - “BL
ページ14に含まれる内容の要旨
Caution: Speaker System Connection • The left and right speakers can be installed on a Connect the speakers using the supplied speaker wall. cables. • When installing the speakers on a wall, be sure to To obtain the best possible surround sound, adjust the have the speakers installed by qualified personnel. speaker parameters (volume, distance, etc.). • DO NOT install the speakers on the wall by yourself Notes: to avoid unexpected damage from them falling off • Be sure to match the speaker cable
ページ15に含まれる内容の要旨
Displaying Disc Information Initial Settings By using the Setup menu, you can make various on-screen adjustments to items such as picture and sound. You can display various information about the disc You can also set a language for the subtitles and the loaded on-screen. Setup menu, among other things. For details on each Setup menu item, see pages 11 to 14. 1. Press DISPLAY to show various playback OSD Initial language settings: information. When the POWER is turned on for the first time, the
ページ16に含まれる内容の要旨
General Operation DISPLAY 1. Press SETUP. The Setup menu appears. TV Aspect 4:3 – Select when a standard 4:3 TV is connected. 16:9 – Select when a 16:9 wide TV is connected. 2. Use v / V to select the desired option then press B to move to the second level. The screen shows Display Mode the current setting for the selected item, as well as The Display Mode setting works only when the TV alternate setting(s). Aspect mode is set to 4:3. 3. Use v / V to select the second desired option and Letter
ページ17に含まれる内容の要旨
AUDIO 5.1 Speaker Setup Make the following settings for the built-in 5.1 channel Each DVD disc has a variety of audio output options. surround decoder. Set the player’s AUDIO options according to the type of audio system you use. 1. Press ENTER, and the 5.1 Speaker Setup menu appears. Dynamic Range Control (DRC) 2. Use b / B to select the desired speaker. 1 With the DVD* format, you can hear a program’s soundtrack in the most accurate and realistic 3. Adjust options using v / V / b / B buttons.
ページ18に含まれる内容の要旨
Rating 5.1 Speaker Setup Blocks playback of rated DVDs based on their Test contents. Not all discs are rated. Press b / B to test the signals of each speaker. Adjust 1. Select “Rating” on the LOCK menu then press B. the volume to match the volume of test signals 2. Input a password and press ENTER. memorized in the system. 3. Select a rating from 1 to 8 using the v / V buttons. Front Left (Front L) → Center→ Front Right (Front R) Rating 1-8: Rating one (1) has the most restrictions → Rear Rig
ページ19に含まれる内容の要旨
Operation General features Buttons Operations Discs Z (OPEN / CLOSE) Opens or closes the disc tray. ALL X (PAUSE) During playback, press X to pause playback. ALL Press X repeatedly to play Frame-by-Frame. DVD . / > During playback, press . or > to go to the next ALL chapter/track or to return to the beginning of the current chapter/track. Press . twice briefly to step back to the previous chapter/track. m / M During playback, press m or M repeatedly to select the DVD required scan speed. ACD MP3
ページ20に含まれる内容の要旨
Additional features Time Search DVD To start playing at any chosen time on the disc: 1. Press DISPLAY during playback. 2. Press v / V to select the time clock icon and “--:--:--” appears. 3. Input the required start time in hours, minutes, and seconds from left to right. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then input the correct numbers. 4. Press ENTER to confirm. Playback starts from the selected time. 1.5 times speed playback DVD You can play at 1.
