ページ1に含まれる内容の要旨
M100_00.book Page 1 Friday, February 18, 2005 6:23 PM
DVD VIDEO RECORDER
DR-M100S
CH+
RAM/RW
STANDBY/ON
PUSH-OPEN
CH-
i
For Customer Use:
Enter below the Model No. and
Serial No. which are located on the
rear of cabinet. Retain this
information for future reference.
INSTRUCTIONS
Model No.
Serial No.
EN
LPT1013-001B
ページ2に含まれる内容の要旨
Filename [M100_02Safety.fm] Masterpage:Left0 M100_00.book Page 2 Friday, February 18, 2005 6:23 PM SAFETY FIRST 2 EN Dear Customer, WARNING: Thank you for purchasing the JVC DVD video recorder. Before TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE use, please read the safety information and precautions to THIS UNIT TO RAIN OR MOISTURE. ensure safe use of your new unit. CAUTION: This unit should be used with AC 120VH, 60Hz only. Cautions To prevent electric shocks and fire hazards, DO NOT use
ページ3に含まれる内容の要旨
Filename [M100_02Safety.fm] Masterpage:Right+ M100_00.book Page 3 Friday, February 18, 2005 6:23 PM SAFETY FIRST EN 3 ANTENNA INSTALLATION INSTRUCTIONS IMPORTANT PRODUCT SAFETY 1. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the INSTRUCTIONS product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up Electrical energy can perform many useful functions. But improper static charges. Article
ページ4に含まれる内容の要旨
Filename [M100_02Safety.fm] Masterpage:Left+ M100_00.book Page 4 Friday, February 18, 2005 6:23 PM SAFETY FIRST 4 EN USE SERVICING 1. Accessories 1. Servicing To avoid personal injury: If your product is not operating correctly or exhibits a marked ● Do not place this product on an unstable cart, stand, tripod, change in performance and you are unable to restore normal bracket, or table. It may fall, causing serious injury to a child or operation by following the detailed procedure in its o
ページ5に含まれる内容の要旨
Filename [M100_02Safety.fm] Masterpage:Right+ M100_00.book Page 5 Friday, February 18, 2005 6:23 PM SAFETY FIRST EN 5 When the equipment is installed in a cabinet or a shelf, make sure Declaration of Conformity that it has sufficient space on all sides to allow for ventilation Model Number:DR-M100SU (10 cm or more on both sides, on top and at the rear). Trade Name:JVC When discarding batteries, environmental problems must be Responsible Party:JVC Americas Corp. considered and the local rul
ページ6に含まれる内容の要旨
Filename [M100_03TOC.fm] Masterpage:Left0 M100_00.book Page 6 Friday, February 18, 2005 6:23 PM CONTENTS 6 EN SAFETY FIRST 2 EDITING 53 DV Dubbing ................................................................................. 53 DISC INFORMATION 7 Edit From A Camcorder............................................................... 54 About Discs....................................................................................7 Edit To Or From Another Recorder ............................
ページ7に含まれる内容の要旨
Filename [M100_04DiscInfo.fm] M100_00.book Page 7 Friday, February 18, 2005 6:23 PM Masterpage:Right0 DISC INFORMATION EN 7 DVD-R/RW Discs About Discs It is only possible to use DVD-R discs which conform with DVD-R standard Version 2.0 or 2.1. It is only possible to use discs which conform with DVD-RW Recordable/Playable Discs standard Version 1.1 or 1.2. Available in VR mode and Video You can use discs with the following logos for recording and mode. playback. When a DVD-R/RW disc (Video
ページ8に含まれる内容の要旨
Filename [M100_04DiscInfo.fm] M100_00.book Page 8 Friday, February 18, 2005 6:23 PM Masterpage:Left+ DISC INFORMATION 8 EN Discs For Playback Only Unplayable Discs You can use discs with the following logos for playback only. The unit may not be able to play back or it may take some time to read a disc depending on the recording status or condition of the DVD VIDEO Video CD/Super Video CD disc, or if the disc is scratched, dirty or warped. In addition, do not attempt to play back discs in u
ページ9に含まれる内容の要旨
Filename [M100_04DiscInfo.fm] M100_00.book Page 9 Friday, February 18, 2005 6:23 PM Masterpage:Right+ DISC INFORMATION EN 9 Audio CD/Video CD/SVCD Recording Medium And Format Typically, Audio CD discs are divided into separate tracks each containing one song. Each track is assigned a number. For DVD-RAM example, the third track is Track 3. The same is true for Video CD/ ● Recording and erasing can be performed as many times as SVCD discs. possible on a disc. However, some discs are not div
ページ10に含まれる内容の要旨
Filename [M100_04DiscInfo.fm] M100_00.book Page 10 Friday, February 18, 2005 6:23 PM Masterpage:Left+ DISC INFORMATION 10 EN DVD VIDEO Marks Placing A Disc Sometimes marks are printed on a DVD disc and/or on its Opening the disc tray packaging to indicate information regarding the contents and Press M to open the disc tray. functions of the disc. Check the marks indicating the contents and functions of the disc. Note, however, that in some cases a disc may not include a mark even for a fun
ページ11に含まれる内容の要旨
Filename [M100_04DiscInfo.fm] M100_00.book Page 11 Friday, February 18, 2005 6:23 PM Masterpage:Right+ DISC INFORMATION EN 11 Care And Handling Of Discs How to handle discs When handling a disc, do not touch the surface of the disc. Since discs are made of plastic, they are easily damaged. If a disc gets dirty, dusty, scratched or warped, the images and sound will not be picked up correctly, and such a disc may cause the unit to malfunction. Label side Do not damage the label side, st
ページ12に含まれる内容の要旨
Filename [M100_05Name.fm] M100_00.book Page 12 Friday, February 18, 2005 6:23 PM Masterpage:Left0 INDEX 12 EN Front View A B C D E F G CH+ RAM/RW STANDBY/ON DV DVIN F-1 S-VIDEO VIDEO L(MONO) AUDIO R HI J K L H Front Display Panel A Standby/On Button (STANDBY/ON A) I S-video Input Connector [S-VIDEO] B Infrared Beam Receiving Window J Video/Audio Input Connectors [VIDEO/AUDIO (L(MONO)/ C Disc tray R)] D Eject Button (M) K DV Input connector [DV IN (A*)] E Record Button (R) * i (i.Link) refers
ページ13に含まれる内容の要旨
Filename [M100_05Name.fm] M100_00.book Page 13 Friday, February 18, 2005 6:23 PM Masterpage:Right+ INDEX EN 13 Front Display Panel GH AB CDF E I LPCM DISC FR XPSPLPEP VR -RWVCD DVD-RAM J K N OP L M A Disc Type Indicator G Random/Program Playback Mode Indicator (RND/PRGM) When a disc is loaded, the type of the disc is indicated. A pg. 33 Disc Status Indicator ARNDB: Lights when Random Playback mode is set. When a disc is running, the disc marks rotate. APROGB: Lights when Program Playback mod
ページ14に含まれる内容の要旨
Filename [M100_05Name.fm] M100_00.book Page 14 Friday, February 18, 2005 6:23 PM Masterpage:Left+ INDEX 14 EN Q Audio Button (AUDIO) A pg. 26 Remote Control R Subtitle Button (SUBTITLE) A pg. 25 S DVD STANDBY/ON Button (DVD A) A pg. 40 T TV STANDBY/ON Button (TV A) For turning on/off the power of a JVC TV. U TV Volume Buttons (TV VOL) A For adjusting the volume of a JVC TV. S V Channel Buttons (CH +/–) A pg. 34 B W Memo Button (MEMO) A pg. 44 T Mark Button (MARK) A pg. 25 X Timer Button (TIME
ページ15に含まれる内容の要旨
Filename [M100_05Name.fm] M100_00.book Page 15 Friday, February 18, 2005 6:23 PM Masterpage:Right+ INDEX EN 15 When using Live Memory playback On-Screen Display A B When ON SCREEN on the remote control is pressed, various operational indicators appear on the TV screen. To clear the DVD-RAM TITLE2 0:12:27 TITLE2 CHAPTER1 6:36PM LP operational indicators, press ON SCREEN twice. EACH0:13:34 STEREO CH10 When playing back a recorded title C D E F G A Disc type A B C D E B Current time DVD-VIDEO
ページ16に含まれる内容の要旨
Filename [M100_05Name.fm] M100_00.book Page 16 Friday, February 18, 2005 6:23 PM Masterpage:Left0 INSTALLING YOUR NEW UNIT 16 EN THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO Basic Connection OPERATION CAN BE PERFORMED. 1 Make sure the package contains all of the accessories listed in “SPECIFICATIONS” (A pg. 69). Antenna or Cable 2 Place the unit on a stable, horizontal surface. 3 Connect the unit to a TV depending on the TV and cables you Coaxial cable use. 8 Simple Connections To connec
ページ17に含まれる内容の要旨
Filename [M100_05Name.fm] M100_00.book Page 17 Friday, February 18, 2005 6:23 PM Masterpage:Right0 INITIAL SETTINGS EN 17 1 Connect the antenna cable to the unit. (A pg. 16) Then connect Plug & Play Set the AC power cord to an AC outlet. Do not turn on the unit. The clock and tuner channels will be set automatically. ● ALOADINGB blinks on the front display panel when the AC plug Auto Clock Set/Auto Tuner Set of the power cord is connected into an AC outlet and it takes This unit sets the
ページ18に含まれる内容の要旨
Filename [M100_05Name.fm] M100_00.book Page 18 Friday, February 18, 2005 6:23 PM Masterpage:Left+ INITIAL SETTINGS 18 EN On-screen Language Set Language This unit offers you the choice to view on-screen messages in 3 different languages. ● Turn on the unit. 1 Press SET UP to access ● Turn on the TV and select an input mode such as EXT1. DVD SET UP FUNCTION SET UP INITIAL SET UP the Main Menu screen. VIDEO IN/OUT RECORDING SET DISPLAY SET OTHERS 2 Press selection keys to SUPERIMPOSE AUTO se
ページ19に含まれる内容の要旨
Filename [M100_05Name.fm] M100_00.book Page 19 Friday, February 18, 2005 6:23 PM Masterpage:Right+ INITIAL SETTINGS EN 19 OFF: Select when Daylight Saving Time does not apply to Clock Set you. 7 Press selection keys to DVD SET UP FUNCTION SET UP INITIAL SET UP Perform clock setting only if the clock has not been set correctly by select ATIME ZONEB, TUNER SET CLOCK SET the Plug & Play setting. then press ENTER. AUTO CLOCK ON Press selection keys to ● Turn on the unit. AUTO HOST CH [CATV] s
ページ20に含まれる内容の要旨
Filename [M100_05Name.fm] M100_00.book Page 20 Friday, February 18, 2005 6:23 PM Masterpage:Left+ INITIAL SETTINGS 20 EN Manual Channel Set Tuner Set You can add the channels you want or delete the channels you do not want manually. ● Turn on the unit. 1 Press SET UP to access the Main Menu screen. ● Turn on the TV and select an input mode such as EXT1. 2 Press selection keys to DVD SET UP FUNCTION SET UP INITIAL SET UP select AINITIAL SET UPB, TUNER SET CLOCK SET then press ENTER. BAND CA
