ページ1に含まれる内容の要旨
40” WIDE LCD Color TV/MONITOR
Owner’s Manual
Model:KR-400T
ENGLISH
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Warnings WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN. WARNING : To reduce the risk of electric shock do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.. The exclama
ページ4に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in potential electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference. Observing the simple precaut
ページ5に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS 11. Outdoor Antenna Grounding 16. Servicing If an outside antenna or cable system is Do not attempt to service this product yourself as connected to the product, be sure the antenna or opening or removing covers may expose you to cable system is grounded so as to provide some dangerous voltage or other hazards. Refer all protection against voltage surges and built-up servicing to qualified service personnel. static charges. Article 810 of the National 17. Damage Req
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
Contents Before operating the set, please read this manual carefully. 3 Warnings Important Safety Instructions 4~5 Contents 7 Supplied Accessories 8 Controls 9~11 Channel of panel 9 Remote controller 10~11 Basic Operation 12 On and off 12 Channel selection 12 Volume adjustment 12 Q.View 12 Mute Function 12 On screen Language selection 12 On Screen Menus and Displays 13 Setting up TV Channel 14~16 Auto Program 14
ページ8に含まれる内容の要旨
Supplied Accessories L Make sure the following accessories are provided with Product. 1. Batteries (2EA) 2. Remote controller 4. PC ANALOG IN cable 5. PC DIGITAL IN cable 3. Owner’s manual 6. PC Audio IN cable Model: KR-400T Owner’s Manual 7. AC Cord Battery installation uInserting batteries 1. Remove the battery cover by pulling it upward in the direction shown by the arrow. 2. Insert the batteries with correct polarity ( "+" to "+", and "-" to "-" ). 3. Replace the battery compartment cover
ページ9に含まれる内容の要旨
Controls 1. ON/OFF Switches TV set on or off. 2. MENU Displays a menu. 3. + CH - (Channel Up/Down) Selects a Channel or a menu item. 4. + VOL - (Volume Up/Down) Adjusts the volume./ Adjusts menu settings. 5. TV/AV Selects TV, VIDEO, COMPONENT, S-VIDEO, PC-ANALOG, PC-DIGITAL or DTV mode./Clears the menu from the screen. 6. Power Indicator Illuminates in red when the TV is in standby mode./ Illuminates in green when the TV is switched on. Illuminates in blinked when the power save mode(only PC mo
ページ10に含まれる内容の要旨
Controls All the functions can be controlled with the remote controller. Some functions can also be adjusted with the buttons on the side panel of the set. Remote controller Before you use the remote controller, please install the batteries. 1. POWER Turns the TV on from standby or off to standby mode. 2. MUTE Turns the sound on and off. 3. NUMBER buttons Selects Channel numbers. 4. PSM (Picture Status Memory) Recalls your preferred picture setting 5. SSM (Sound Status Memory) Recalls your p
ページ11に含まれる内容の要旨
Controls 12. CHxy (Channel Up/Down) Selects next Channel or a menu item. 13. VOLÏq (Volume Up/Down) Adjusts the sound level. Adjusts menu settings. 14. OK Accepts your selection or displays the current mode. 15. CC Set the caption function. 16. Q.VIEW Returns to the previously viewed Channel. 17. LIST Displays the program list menu. 18. PIP Displays a PIP(Picture In Picture) screen. 19. ARC Selects a screen mode- 16:9, 14:9, ZOOM,1:1, 4:3. 20. INPUT Selects the AV source of sub picture in PI
ページ12に含まれる内容の要旨
Basic Operation Turning the TV On and Off Press the ON/OFF button on the side panel of the TV to go into standby mode. 1. If the TV is in standby mode, press the Power button on the remote controller or the TV itself to turn the TV on. 2. Press the Power button again on the remote controller or the TV itself to turn the TV off. Note : If the TV is on and the power button is pressed to turn the TV off, the TV goes into standby mode. Channel selection You can select a Channel number with the CHxxy
ページ13に含まれる内容の要旨
On Screen Menus and Display Equalizer 1. Press the MENU button to display main menu. Flat 2. Press the CHxxyy button to select menus-Picture, Music Sound, Special, Setup. Movie 3. Adjust each menu with the VOLÏÏqq button. Speech 4. Press the MENU button to return to preceding menu. User 5. Press the TV/AV button to finish adjusting menu. 0.1 0.5 1.5 5.0 10Khz xy MENU TV/AV Main menu Picture Contrast 90 Picture q Auto program Brightness 75 Sound q Tuner mode TV
ページ14に含まれる内容の要旨
Setting up TV Channel Once you have preset the Channel, you will be able to use Auto program the CHxxyy to scan the Channel you Programmed. Tuner mode TV Channel can be tuned using Auto or Manual Program menu. Start Auto Program All Channel that can be received are stored by this method. It is recommended that you use Auto Program during installation of this set. xy Ïq MENU TV/AV 1. Press the MENU button. 2. Select the Setup menu. 3. Select the Auto program menu. 4. Press the
ページ15に含まれる内容の要旨
Setting up TV Channel Manual Program Manual program Manual Program lets you manually tune and arrange Tuner mode TV the Channels in whatever order you desire. Also you can Channel 7 Fine qqq assign a Channel name with 5 characters to each Search qqq Channel number. Name 1. Press the MENU button. Storage On 2. Select the Setup menu. 0-9 xy Ïq OK MENU TV/AV 3. Select Manu
ページ16に含まれる内容の要旨
Setting up TV Channel Program list Program Iist You can check the Programs stored in the memory by 5 displaying the Program list. 16 2 7 1. Press the MENU button. 3 8 4 9 2. Select the Setup menu. 3. Press the CHxxyy button select Program list. xy Ïq OK MENU TV/AV Selecting a Channel in the Program list xxyy ÏÏqq Select a Channel with the CH or VOL button. The set switches to the chosen Channel number. Paging th
ページ17に含まれる内容の要旨
Picture Control You can adjust picture Contrast, Brightness, Color, Sharpness and Tint to the levels you prefer. Picture Manual Picture Control Contrast 90 1. Press the MENU button. Brightness 75 2. Select the Picture. Color 75 Sharpness 50 3. Press the CHxxyy buttons to select a picture item. Tint 0 4. Press the VOLÏÏqq buttons to adjust the picture condition as you want. xy Ïq MENU TV/AV 5. Press the TV/AV button to store for t
ページ18に含まれる内容の要旨
Sound Control You can select your preferred sound setting; Flat, Music, Sound Movie or Speech and you can also adjust the sound Equalizer q frequency of equalizer, balance. If you switch AVL to on, Balance 0 the set automatically keeps on an equal volume level AVL Off even if you change program. Surround Off 1. Press the MENU button. nVolume 0 2. Select the Sound menu.
ページ19に含まれる内容の要旨
Captions Closed captioning is a process, which converts the audio portion of a television program into written words, which then appear on the television screen in a form similar to subtitles. Closed captions allow viewers to read the dialogue and narration of television programs. Using Closed Captions Captions are the subtitles of the dialogue and narration of television programs. For prerecorded programs, program dialogue can be arranged into captions in advance. It’s possible to caption a liv
ページ20に含まれる内容の要旨
Parental Control If used, this optional feature can “block” undesirable programming from appearing on the TV. Note: Parental Control is not available in PC Mode. To block Computer inputs, use the block AUX SOURCES option in the Parental Control menu in TV Mode; computer inputs will not be available. Parental Control offers the user a wide variety of options and settings that restrict or “block” the programming that can appear on the TV. Parental control allows the user the capability of defining
