ページ1に含まれる内容の要旨
LH-T6749A JA1ULLK_ENG
DVD/CD RECEIVER
OWNER’S MANUAL
MODEL: LGDVT418
Before connecting up, operating or repairing this product,
please read this instruction booklet carefully and
completely.
ページ2に含まれる内容の要旨
LH-T6749A JA1ULLK REGULATORY INFORMATION: CAUTION FCC Part 15 RISK OF ELECTRIC SHOCK This product has been tested and found to comply with the DO NOT OPEN limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable WARNING: TO REDUCE THE RISK protection against harmful interference when the product is OF ELECTRIC SHOCK, operated in a residential installation. This product generates, DO NOT REMOVE COVER (OR BACK) uses and can radiat
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS MANUAL FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use, and servicing. This unit does not contain any parts that can be
ページ4に含まれる内容の要旨
Contents PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Introduction . . . . . . . . . . . . . . . . . . . .3-10 SLOW SCAN . . . . . . . . . . . . . . . . . . . . . . . . . . .24 IMPORTANT SAFETY INSTRUCTIONS . . . . . .3 REPEAT A-B . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Symbol used in this Manual . . . . . . . . . . . . . . .5 REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 About the Symbol Display . . . . . . . . . . . . .5 3D S
ページ5に含まれる内容の要旨
Introduction About the Symbol Display To ensure proper use of this product, please read this owner’s manual carefully and retain for future “ ” may appear on your TV display during reference. operation and indicates that the function explained in this owner’s manual is not available on that specific This manual provides information on the operation DVD video disc. and maintenance of your DVD/CD receiver. Should the unit require service, contact an authorized service location. Notes on Discs Symb
ページ6に含まれる内容の要旨
Types of Playable Discs DVD (8 cm / 12 cm disc) DVD audio discs (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit plays DVD -R, DVD +R, Regional code DVD -RW, DVD +RW, and CD-R / CD-RW that This DVD/CD receiver is designed and contains audio titles, MP3, WMA, and/or JPEG files. manufactured for playback of region “1” 1 encoded DVD software. This unit can play only DVD discs labeled “1” or “ALL”. Notes: • Depending on the conditions of the recording Notes on Regional Code
ページ7に含まれる内容の要旨
Disc-related terms Title (DVD video discs only) DVD ±R / DVD ±RW A title is generally a distinct section of a DVD disc. For DVD -R and DVD +R are two different standards for example the main feature could be title 1, a recordable DVD drives and discs. This format allows documentary describing how the film was made could information to be recorded onto the DVD disc only be title 2, and cast interviews could be title 3. Each once. DVD +RW and DVD -RW are two standards for title is assigned a refe
ページ8に含まれる内容の要旨
Front Panel STANDBY/ON PHONES connector STANDBY indicator VOLUME controller Lights red when the receiver is in Standby mode (off). DISPLAY Window DISC Tray FUNCTION/PLAY Press and hold down this button Remote sensor about 3 seconds, then press repeatedly to select other function. MONO/STEREO/ PAUSE/STEP MEMORY/STOP OPEN/CLOSE TUNING (-/+)/SKIP/SCAN AV2 AUDIO Input (L/R)/VIDEO Input Display Window Indicates current SLEEP Programmed surround mode indicator playback active MUTE indicator Indicates
ページ9に含まれる内容の要旨
Remote Control POWER OPEN/CLOSE FUNCTION SELECTOR You can also select the desired function with the FUNC./PLAY on the front panel. NUMBER SLEEP (p. 35) SUBTITLE (p. 25) PRO LOGIC II (p. 17) RETURN (p. 23, 30) AUDIO (p. 25) SOUND (p. 17) SETUP (p. 19) DISPLAY (p. 18) ENTER ARROW For use in highlighting a TITLE (p. 25) selection on a GUI menu Use the TITLE button to screen, TITLE and MENU display the title screen included on DVD video discs. screen. MENU (p. 25) SLOW SCAN (Q Q /
ページ10に含まれる内容の要旨
Rear Panel POWER CORD SPEAKER Connectors COAXIAL DIGITAL IN Connector AV1 AUDIO Input (L/R)/VIDEO IN Connectors FM Antenna Connector 6 6 6 6 6 4 OPTICAL IN Connector S-VIDEO OUT Connector MONITOR VIDEO OUT Connector COMPONENT VIDEO OUT Connectors Connect to a TV with Y Pb Pr inputs. AM Loop Antenna Connectors Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. 10
ページ11に含まれる内容の要旨
Installation and Setup TV Connections ® Make one of the following connections, depending on Progressive Scan (ColorStream pro) connection the capabilities of your existing equipment. If your television is a high-definition or “digital ready” television, you may take advantage of the DVD/CD Tips: Receiver’s progressive scan output for the highest Depending on your TV and other equipment you wish video resolution possible. to connect, there are various ways you could connect If your TV does no
ページ12に含まれる内容の要旨
Audio Connection to Optional Equipment Connect the DVD/CD receiver to your optional equipment for audio output. 1. Connect a VCR to the AV1 connectors. 2. Connect a additional VCR to the AV2 connectors. 3. Connect an optical output of DVD/CD receiver (or Digital Device etc) to the OPTICAL IN connector. 4. Connect an coaxial output of DVD/CD receiver (or Digital Device etc) to the COAXIAL IN connector. VCR Additional VCR OUT IN IN OUT VIDEO VIDEO AUDIO (L) AUDIO (L) AUDIO (R) AUDIO (R) To A
ページ13に含まれる内容の要旨
Antenna Connections Connect the supplied FM/AM antenna for listening to the radio. Connect the AM Loop antenna to the AM antenna connector. Connect he FM Wire antenna to the FM antenna connector. Notes: To prevent noise pickup, keep the AM Loop antenna away from the DVD/CD receiver and other components. Be sure to fully extend the FM wire antenna. After connecting the FM Wire antenna, keep it as horizontal as possible. 13 Installation and Setup
ページ14に含まれる内容の要旨
Assembling and Connecting to the Speakers The front and rear speakers are detached from the speaker stands. Connect the speaker cords and assemble the front and rear speakers from speaker stands as illustrated. How to connect the Speakers Connect the speaker cords to the appropriate terminals on the bottom of each front and rear speaker. After connecting the speaker cords to the appropriate terminals on the bottom of each front and rear speaker and attach the front and rear speakers to the spe
ページ15に含まれる内容の要旨
Speaker System Connection Connect the speakers using the supplied speaker cords. To obtain the best possible surround sound, adjust the speaker parameters (volume, distance, etc.). Notes: Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cables are reversed, the sound will be distorted and will lack base. If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers. Abo
ページ16に含まれる内容の要旨
Speaker Positioning In the case of normal position use the 6 speakers (2 front speakers, 1 center speaker, 2 rear speakers and subwoofer). If you want to play the excellent bass sound, DTS digital surround or Dolby Digital surround, you should connect a subwoofer. • Front speakers According to your listening position set up the speakers for equal distance. And by hearing position set up the interval between speakers to 45 degree. • Center speaker The center speakers and front speakers are ideal
ページ17に含まれる内容の要旨
Mini Glossary for Audio Stream & Sound Mode Surround Mode You can enjoy surround sound simply by selecting one of the pre-programmed sound fields according to the program you want to listen to. Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources such as discs, DVD A) By pressing SOUND button and compact discs, etc.bearing the trademark. DTS Digital Each time you press SOUND button, the sound mode is Surround delivers up to 6 channels of transpa
ページ18に含まれる内容の要旨
Example: On-Screen Display during On-Screen Display playing DVD Video You can display the general playback status on the TV Items Selection Method screen. Some items can be changed using the menu. To use the on-screen display: b / B, Numbers Title Number 1 / 3 ENTER 1. Press DISPLAY during playback. b / B, Numbers Chapter Number 1 / 12 ENTER 2. Press v / V to select an item. The selected item is highlighted. Numbers, ENTER Time search 0:20:09 3. Press b / B to change the setting. You can also
ページ19に含まれる内容の要旨
DISPLAY Initial Settings DISPLAY By using the Setup menu, you can make various 16 : 9 TV Aspect adjustments to items such as picture and sound. You Display Mode Widescreen can also set a language for the subtitles and the Progressive Scan Off Setup menu, among other things. For details on each Setup menu item, see pages 19 to 22. To display and exit the Menu: Press SETUP to display the menu. A second press of Move Select SETUP will take you back to initial screen. To go to the next
ページ20に含まれる内容の要旨
AUDIO Note: • If your TV does not accept the Progressive Each DVD disc has a variety of audio output options. Scan format, the picture will appear scrambled if Set the receiver’s AUDIO options according to the you try Progressive Scan on the DVD/CD receiver. type of audio system you use. AUDIO 4. When the confirm menu appears on your screen 5.1 Speaker Setup Select Cancel is highlighted as default. Use the b / B DRC On Vocal On buttons to highlight Enter. 5. Pressing ENTER will set the receive
