ページ1に含まれる内容の要旨
DVD Player with Karaoke
Instruction Manual
IMPORTANT NOTICE
Model DVD816
Please read this notice before continuing to read this instruction manual.
In order to make sure that you have the correct manual, please have a
look at the back of the DVD player cabinet and check what the model
number reads.
If the model number reads “DVD816-4”, you have the right manual and
you can proceed to use this manual for reference purposes.
If the model number reads “DVD816B-4”, you need to go to the follo
ページ2に含まれる内容の要旨
IMPORTANT INFORMATION CAUTION To reduce the risk of electric shock, do not remove cover. Refer servicing to qualified service personnel. Please read the manual carefully before operating this player. DVD PLAYER PLACEMENT Please do not place the player in the following locations: In direct sunlight or near or on top of heat sources such as heaters, stoves, or other appliances that produce heat. Locations which are badly ventilated, dusty, contain lots of moisture, or are unsteady. Do
ページ3に含まれる内容の要旨
Index Important Information ------------------------------------------------------------------------------------ 1 Index--- ------------------------------------------------------------------------------------------------------ 2 Controls Overview 1. Back Panel / Front Panel Overview------------------------------------------------------------- 3 2. Remote Control Overview------------------------------------------------------------------------- 4 Connections Overview 1. Preparati
ページ4に含まれる内容の要旨
CONTROLS OVERVIEW FRONT PANEL OVERVIEW 1. Disc Tray 2. Remote Control Sensor 3. Backlit Display 4. Open/Close Disc Tray Button 5. Play/Pause Button 6. Stop Playback Button 7. Power Button 8. Microphone Input Jack 9. Microphone Volume Control BACK PANEL OVERVIEW 1. Power Cord 2. Audio Output – Left Channel 3. Component Video Outputs 4. VGA Output 5. Ventilation Fan 6. Audio Output – Right Channel 7. Digital Output – Coaxial 8. Composite Video Output 9. S-Video Output 10. Digital Output
ページ5に含まれる内容の要旨
REMOTE CONTROL OVERVIEW 1. Standby/On 20. Return 2. Numerical Buttons 21. Mute 3. Goto 22. Repeat 4. Up 23. A-B 5. Title 24. Slow 6. Enter 25. Program 7. Right 26. Subtitle 8. Down 27. Audio 9. Menu/PBC 28. Echo - 10. Prev 29. Echo + 11. Next 30. Stop 12. Play/Pause 31. REV 13. Step 32. FWD 14. Volume - 33. Zoom 15. Volume + 34. Left 16. Angle 35. Setup 17. 3D 36. Open/Close 18. R/L 37. OSD 19. N/P Page 4
ページ6に含まれる内容の要旨
CONNECTIONS OVERVIEW 1. PREPERATIONS Accessories Included in the Box 1. Remote Control 2. Composite Audio/Video Cable 3. Instruction Manual Installing Remote Control Batteries Insert 2 x ‘AAA’ size batteries into the battery compartment. Be sure to note the polarities marked inside the battery compartment so the batteries can be inserted the proper way. There should be no large obstacles in between the remote control and the player itself. 2. CONNECTING THE PLAYER When establishing a
ページ7に含まれる内容の要旨
INTRODUCTION TO BASIC OPERATION 1. TURN ON THE TV AND YOUR DVD PLAYER Press the POWER button on the player to turn on the power to the player. The display on the player lights up and the player will start searching for a disc NOTE: You can not turn the power on using the remote if the power is off. You can only turn the player on and off using the remote when the player is in Standby mode. In Standby mode the display of the player turns off and it goes into power saving mode. Access t
ページ8に含まれる内容の要旨
b. When a DVD disc is loaded, press buttons to highlight a menu item you want to select. As for SVCD or VCD2.0 discs, you can press NUMERICAL buttons to select a track to play. c. Press the ENTER or PLAY button to enter a menu you have selected or start an action you have selected. d. During DVD disc playback, press the MENU button to return to Root menu. As for SVCD or VCD2.0 discs (with PBC function turned on), press PBC button to return to the menu. e. Press the STOP button to stop pl
ページ9に含まれる内容の要旨
The programmed playback menu for SVCD/VCD/CD/CD+G discs looks like the screen image to the right. Note that only the track number needs to be entered for the entry to be valid. - If PBC function is on, this operation will turn PBC function off while the chapters/tracks are played back in a programmed order. Using the buttons, highlight a memory location. Press the NUMERICAL buttons to enter the chapter/track numbers in the order you want them to play. Then, press PLAY button or use
ページ10に含まれる内容の要旨
Press PREV to beginning of the previous title/chapter/track on a disc. 6. MULTI-SPEED PLAYBACK Press FWD key repeatedly to toggle between fast forward 2x, 4x, 8x, 20x and regular 1x speed playback. Alternatively, press the PLAY button to return to regular playback speed. Press REV key repeatedly to toggle between fast reverse 2x, 4x, 8x, 20x and regular speed playback. Alternatively, press the PLAY button to return to regular playback speed. 7. MULTI-SPEED SLOW MOTION PLAYBACK
ページ11に含まれる内容の要旨
9. USING THE OSD (ON-SCREEN DISPLAY) FEATURE While loading and playing DVDs, press the OSD button once. The following information is displayed on the TV screen: - Disc Type - Title Number / Total Number of Titles - Chapter Number / Total Number of Chapters - Current Playback Position (Time) on the Disc Press the OSD button a second time and the following information is displayed on the TV screen: - Audio Language Track - Audio Format - Subtitle Status / Language - Angle Avail
ページ12に含まれる内容の要旨
11. CHANGING THE AUDIO LANGUAGE During disc playback, press the AUDIO button once to view the current audio language on screen. When a DVD or SVCD has been pre-recorded with multiple audio soundtracks, you can use the language feature to change the audio language. Note that language availability depends entirely on the disc content and not on the player. See DVD disc sleeve for details on the included languages. 12. SUBTITLES (COMPATIBLE WITH DVD OR SVCD DISCS ONLY) Press the SUBTITLE
ページ13に含まれる内容の要旨
15. MUTING AUDIO OUTPUT Press the MUTE button once to mute audio output. Press the MUTE button again to resume previous audio output volume level. 16. ZOOMING FEATURE Press ZOOM button to active the function and choose the required zoom factor : ZOOM1, ZOOM2, ZOOM3, ZOOM1/2, ZOOM1/3, ZOOM1/4, ZOOM OFF. Use the buttons to pan across the screen when zoom factor is 1/2/3. 17. CHANGING THE AUDIO MODE (Compatible with CD discs ONLY) Press R/L button once to view the current audio outp
ページ14に含まれる内容の要旨
19. 3D SURROUND MODE Press 3D button on the remote control once and the current 3D surround mode will be displayed on the screen. Press button to highlight 3D surround setup menu items. Press the 3D button again to turn off the menu Use the buttons and press ENTER to choose a surround mode. Press the button until SRND is highlighted and then press the button to enter the EQ menu. EQ is highlighted and the EQ menu options are listed as shown in the image to the right of this text.
ページ15に含まれる内容の要旨
EQ [JAZZ] is highlighted as the graph shown to the right of this text. EQ [POP] is highlighted as the graph shown to the right of this text. EQ [USER] is highlighted as the graph shown at the right. In the USER mode you can customize the graph and therefore the audio mode to your specifications Scroll down to USER and press ENTER button to access the graph Press buttons to highlight the band you want to tune. Then press buttons to increase or decrease the value. Press the ENT
ページ16に含まれる内容の要旨
Press the button until SRND, EQ or BAND is highlighted and then press buttons to highlight KEY. Press the ENTER button to enter the Key adjustment menu. Press buttons to change the key of the tones up or down Press the ENTER button to confirm your selection NOTE : When you go to the “SRND” menu – Surround mode, the “EQ” mode is automatically set to STANDARD. You can change the SRND mode as you wish. However, when you go to the “EQ” menu – Equalizer mode, and change the setting
ページ17に含まれる内容の要旨
Notes: - Press the / buttons to switch between directory area, file area and file type switch area. - In file type switch area, you can press the / buttons to highlight a different file type (WMA, JPEG or MP3) and then press ENTER button. The player reads what kind of files the disc contains and then highlights the icons at the bottom of the screen (file type switch area) to show what file types are on the disc. For example, if a disc contains MP3 and JPEG files but no WMA files, the
ページ18に含まれる内容の要旨
SYSTEM SETUP 1. GENERAL SETUP MENU INFORMATION A) Press the SETUP button, the main SETUP menu appears. When the main menu is displayed, the DVD system will auto pause. B) Press the or button to highlight the desired options page. Then press the or button to enter the options page you have chosen. For example, if you want to enter the VIDEO options page, press button repeatedly to highlight the video icon. The VIDEO options page is displayed on the screen. Press the button to en
ページ19に含まれる内容の要旨
2) SETUP OPTIONS INFORMATION A) SYSTEM SETUP The SYSTEM SETUP options are illustrated below: TV SYSTEM Adjust to change the Color System of the TV (Note that in North America the NTSC color system is used). You can choose from the following TV SYSTEM options. AUTO : Choose this setting if your DVD player is connected to a multi-system TV. NTSC : Choose this setting if your DVD player is connected to a NTSC TV. PAL : Choose this setting if your DVD player is connected to a PAL TV. PAL
ページ20に含まれる内容の要旨
TV TYPE 4:3PS (Pan & Scan) : Choose this setting if your DVD player is connected to a normal aspect ratio TV (4:3). A standard edition movie (4:3) will fill the entire screen of your TV. This might mean that parts of the picture (the left and right edges) won’t be seen. 4:3LB (Letter Box) : Choose this setting if your DVD player is connected to a normal aspect ratio TV (4:3). You will see the movies in its original aspect ratio. You will also see the entire frame of the movie but it mi
