Clam Corp 8241の取扱説明書

ページ1に含まれる内容の要旨

Tow Hitch Assembly
Item Number: 8241






NOTICE!! - Once used, this Tow Hitch Kit
cannot be returned to the store. If you
have a warranty claim, please contact
Clam Corporation Customer Service.
Warranty Information
CLAM Corporation, Inc. warrants to the original retail purchaser its product be free from manufacturer’s defects for one
(1) year from the date of the original purchase. Clam Corporation will replace or repair any part found defective within the
one (1)

ページ2に含まれる内容の要旨

ASSEMBLY DIAGRAM TENSION: TIGHTEN THE 1/2" LOCKNUT (ITEM #4) UNTIL THE SPRINGS ASSEMBLY OF THESE ARE SLIGHTLY COMPRESSED ITEMS TO BE COMPLETED ASSEMBLE THE FRONT ON NEXT PAGE PART OF THE HITCH FIRST (SEE WIDTH NOTE BELOW) 2 2 1 8 14 10 13 12 1 4 9 11 5 5 7 10 6 12 15 3 WIDTH: MOUNTING WIDTHS OF EITHER 14" OR 24" ARE DEPENDENT UPON WHICH END OF THE BENT HITCH TUBE IS ASSEMBLED TO THE SPRING CONNECTION BRACKET IF THE 24" MOUNTING WIDTH IS DESIRED, ASSEMBLE WITH THE LONG LENGTH OF THE HITCH TU

ページ3に含まれる内容の要旨

MOUNTING TO SLED 1.) INSERT OR ATTACH THE LYNCH PINS TO THE PIVOT BRACKETS AND HITCH ASSEMBLY. 2.) PLACE OR POSITION THE HITCH ASSEMBLY AT THE DESIRED MOUNTING LOCATION. NOTE: Mounting height depends on the design of the sled base and therefore is subjective. We recommend mounting as low as feasibly possible. However, before mounting, verify that there are no pivot obstructions (such as the outside lip of the base) when mounted to the towing vehicle. 3.) MARK THE DRILL LOCATIONS USING THE MOUN