ページ1に含まれる内容の要旨
DV130PD_AA2ANN_ENG
DVD PLAYER
OWNER’S MANUAL
MODEL : NDV-28
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
ページ2に含まれる内容の要旨
CAUTION: The apparatus should not be exposed to water CAUTION (dripping or splashing) and no objects filled with liquids, such RISK OF ELECTRIC SHOCK as vases, should be placed on the apparatus. DO NOT OPEN CAUTION concerning the Power Cord Most appliances recommend they be placed upon CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK a dedicated circuit; DO NOT REMOVE COVER (OR BACK) That is, a single outlet circuit which powers only that NO USER-SERVICEABLE PARTS INSIDE appliance and has no addit
ページ3に含まれる内容の要旨
Contents Introduction . . . . . . . . . . . . . . . . . .4-7 Operation . . . . . . . . . . . . . . . . . .14-18 General Features . . . . . . . . . . . . . . . . . . . . . .14 About the Symbol Display . . . . . . . . . . . . .4 Additional Features . . . . . . . . . . . . . . . . . . . .15 Symbol used in this Manual . . . . . . . . . . . . . .4 Playing an Audio CD or MP3/WMA file . . . . .16 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .4 Programmed Playback . . . . . . . . . . . .
ページ4に含まれる内容の要旨
Introduction To ensure proper use of this product, please read this Cleaning Discs owner’s manual carefully and retain for future Fingerprints and dust on the disc can cause poor reference. picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from This manual provides information on the operation the center out. and maintenance of your DVD player. Should the unit require service, contact an authorized service location. About the Symbol Display “
ページ5に含まれる内容の要旨
Types of Playable Discs Regional Code This unit has a regional code printed on the rear of the DVD unit. This unit can play only DVD discs labelled same (8 cm / 12 cm disc) as the rear of the unit or “ALL”. Video CD (VCD/SVCD) (8 cm / 12 cm disc) Notes on Regional Codes • Most DVD discs have a globe with one or more Audio CD numbers in it clearly visible on the cover. This (8 cm / 12 cm disc) number must match your DVD player’s regional In addition, this unit plays DVD±R/RW and CD-R/RW code
ページ6に含まれる内容の要旨
Front Panel abc d e fg a POWER f Remote Sensor Switches the unit ON and OFF. Point the remote control here. b N (PLAY) g Display window Starts playback. Shows the current status of the unit. c x (STOP) Stops playback. d Disc Tray Insert a disc here. e Z (OPEN / CLOSE) Opens or closes the disc tray. 6
ページ7に含まれる内容の要旨
AAA Remote Control OPERATE OPEN / CLOSE Switches DVD Player ON and OFF. Opens and closes the disc tray. DVD MENU TITLE Accesses menu on a DVD disc. Displays title menu, if available. RETURN bBvV (left/right/up/down) • Selects an item in the menu. Removes the setup menu, displays the video CD with PBC. ENTER • Confirms menu selection. • SCAN ( m / M ) Search backward or forward. DISPLAY • PLAY ( H H ) Accesses On-Screen display. Starts playback. ;; PAUSE/STEP ( ) • PROGRAM Pauses playback tempor
ページ8に含まれる内容の要旨
Installation and Setup Video and Audio Connections Setting up the Player to Your TV The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. If this occurs, Make sure the DVD player is connected directly to the position the player away from the TV, VCR, or radio, TV and not to a VCR, otherwise the DVD image could or turn off the unit after removing the disc. be distorted by the copy protection system. Video – Connect the VIDEO OUT jack on the DVD Player Connections
ページ9に含まれる内容の要旨
Amplifier equipped with 2-channel analog stereo Audio Connection to Optional or Dolby Pro Logic ll / Pro Logic: Connect the left Equipment and right AUDIO OUT jacks on the DVD player to the audio left and right IN jacks on your amplifier, receiver, or stereo system, using the audio cables (A). Connect the DVD player to your optional equipment for audio output. Amplifier equipped with 2-channel digital stereo (PCM) or audio / video receiver equipped with a Rear of DVD player multi-channel decoder
ページ10に含まれる内容の要旨
LANGUAGE Displaying Disc Information on-screen LANGUAGE Menu Language English Disc Audio Original Some items can be changed using the menu. Disc Subtitle Off Disc Menu Original 1. Press DISPLAY during playback. 2. Press b / B to select an item. The selected item is highlighted. Move Select Exit 3. Press v / V to change the setting. Press ENTER. You can also use the number buttons if Menu Language appropriate (e.g. inputting the title number). Select a language for the Setup menu and on-screen 0
ページ11に含まれる内容の要旨
Progressive Scan AUDIO Progressive Scan Video provides the highest quality Each DVD disc has a variety of audio output options. pictures with less flickering. If you are using the Set the player’s AUDIO options according to the type Component Video jacks for connection to a TV or of audio system you use. monitor that is compatible with a progressive scan signal, set Progressive Scan to On. Press ENTER to AUDIO confirm your selection. The confirm menu will appear. Dolby Digital Bitstream DTS Bit
ページ12に含まれる内容の要旨
buttons then press ENTER. Enter the 4-digit LOCK (Parental Control) password again to verify when the “Confirm Password” section is highlighted, then. The “OK” LOCK will be highlighted. Rating Unlock To change the password: Password NEW Area code P L When the “Old Password” section is highlighted, enter the 4-digit password you have created then press ENTER. The“New Password” section will be highlighted. Enter a new 4-digit password using the numbered buttons then press ENTER. Enter the Move S
ページ13に含まれる内容の要旨
OTHERS OTHERS PBC On Auto Play On B.L.E. Off Move Select Exit PBC Set Playback Control (PBC) to On or Off. On: Video CDs with PBC are played according to the PBC. Off: Video CDs with PBC are played the same way as Audio CDs. Auto Play You can set up the DVD player so a DVD disc automatically starts playing whenever the DVD is inserted. If Auto Play mode is set to On, this DVD player will search for title that has the longest playback time and then play back the title automatically. Note: The A
ページ14に含まれる内容の要旨
Operations General features Buttons Operations Discs Z (OPEN / CLOSE) Opens or closes the disc tray. ALL X (PAUSE) During playback, press X to pause playback. ALL Press X repeatedly to play Frame-by-Frame. DVD VCD SKIP (. / >) During playback, press SKIP (. or >) to go to the ALL next chapter/track or to return to the beginning of the current chapter/track. Press SKIP . twice briefly to step back to the previous chapter/track. SCAN (m / M) During playback, press SCAN (m or M) repeatedly to ALL s
ページ15に含まれる内容の要旨
DVD ACD VCD Notes on general features: Last Scene Memory • On a Video CD with PBC, you must set PBC to Off This player memorizes last scene from the last disc on the setup menu to use the repeat function (See that is viewed. The last scene remains in memory “PBC” on page 13). even if you remove the disc from the player or switch off the player. If you load a disc that has the scene • If you press SKIP (>) once during Repeat Chapter memorized, the scene is automatically recalled. (Track) playbac
ページ16に含まれる内容の要旨
MP3 / WMA disc compatibility with this player is Playing an Audio CD or limited as follows: MP3/WMA file • Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA) Audio CD – Once you insert an audio CD a menu • Bit rate: within 8 - 320kbps (MP3), appears on the TV screen. Press v / V to select a 32 - 192kbps (WMA) track then press PLAY or ENTER to playback starts. • The player cannot read an MP3/WMA file that has 001 / 022 CD a file extension other than “.mp3” / “.wma”. 00:00 /00
ページ17に含まれる内容の要旨
Programmed Playback The program function enables you to store your favorite tracks from any disc in the player memory. A program can contain 30 tracks (Audio CD, MP3/WMA). 1. Insert a disc. (Audio CD, MP3 or WMA.) 2. Press v / V to select the desired file. 3. Press PROGRAM during playback or in the stop mode. Repeat press PROGRAM to place additional tracks on the program list. 4. Press DISPLAY. Program List menu appear. Press v / V to select the track you want to start playing. Press DVD MENU
ページ18に含まれる内容の要旨
Still Picture Viewing a JPEG file 1. Press PAUSE/STEP during slide show. Using this DVD Player you can view discs with JPEG The player will now go into PAUSE mode. files. 2. To return to the slide show, press PLAY, ENTER or 1. Insert a disc and close the tray. press PAUSE/STEP again. The PHOTO menu appears on the TV screen. Zoom 001 / 052 00:00 /00:00 Normal Use zoom to enlarge the video image. 1. Press ZOOM during playback to activate the Zoom File 01 function. File 02 File 03 File 04 2.
ページ19に含まれる内容の要旨
Reference Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu. Language Code Language Code Language Code Language Code Abkhazian 6566 Fiji 7074 Lingala 7678 Singhalese 8373 Afar 6565 Finnish 7073 Lithuanian 7684 Slovak 8375 Afrikaans 6570 French 7082 Macedonian 7775 Slovenian 8376 Albanian 8381 Frisian 7089 Malagasy 7771 Somali 8379 Ameharic 6577 Galician 7176 Malay 7783 Spanish 6983 Arabic 6582 Georgian 7565 Malay
ページ20に含まれる内容の要旨
Troubleshooting Symptom Possible Cause Correction No power. • The power cord is disconnected. • Plug the power cord into the wall outlet securely. • No disc is inserted. • Insert a disc. (Check the disc indicator The power is on, but in the display window is lit.) the DVD player does not work. No picture. • The TV is not set to receive DVD • Select the appropriate video input signal output. mode on the TV. • The video cable is not connected • Connect the video cable securely. securely. No sound.
