ページ1に含まれる内容の要旨
It’s a complete player, processor and preamp that plays everything!
ページ2に含まれる内容の要旨
!
ページ3に含まれる内容の要旨
; !,
6 8 8!* 5
-9 % !0;*
- # #)+
ページ4に含まれる内容の要旨
2; '*"! % @2B8(
+ # * &%#'*"! % @
'3 ((
8 ; '*"! % @ !#(
& ; '*"
ページ5に含まれる内容の要旨
Location - This unit produces a lot of heat. DO NOT STACK, Do not place anything on top of this unit or put in closed cabinet! Power - The SDVDA Player comes standard with an inboard power supply. A fuse block inside the unit allows the unit to be switched between 240V and 120V. Please check the back of the unit before plugging the unit in. Unit is configured for 120V unless otherwise marked. Leave the SDVDA powered on all the time. Connections - Connect the vide
ページ6に含まれる内容の要旨
MSB has been making high-end audio players for over 15 years. The latest is a new audio player that plays SACD and DVD Audio discs, DTS CDs, CDs, MP3s and just about any disc sized music source. It has 24 bit 192k DACs, 192k MSB upsampling, MSB-built volume controlled analog outputs with a pass-through, as well as all the latest digital outputs including Firewire (IEEE 1394), 24 bit 192k MSB Network
ページ7に含まれる内容の要旨
IEEE 1394 and MSB Network digital interface The IEEE 1394 and MSB Network interface makes it possible to connect this player to another product with a single cable and enjoy high sampling rate (up to 192 kHz) PCM multichannel digital audio from DVD-Audio and SACD (IEEE only) discs , as well as digital audio (upsampled to 192k on MSB Network only) from DVD-Video, CD, Video CD and MP3 discs. In addition to simplified connection, jitterless audio is possible with these technologies when
ページ8に含まれる内容の要旨
1. Open the battery compartment cover on the back of the remote control. 2. Insert two AA/R6P batteries into the battery compartment following the indications (+, -) inside the compartment of the larger remote. Install two AAA batteries in the smaller remote. 3. Close the cover. Note, incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following: · Don’t mix new and old batteries together. · Don’t use different kinds of battery together—although the
ページ9に含まれる内容の要旨
· This player is compatible with multi-session discs, but only plays sessions that are closed. · Use CD-R or CD-RW media for recording your MP3 files. · This player can recognize a combined total of up to 250 tracks and folders. If a disc containing over 250 tracks/folders is loaded, only the first 250 tracks/folders recorded on the disc will be playable. · Folder and track names (excluding the “.mp3” extension) are displayed. · There are many different recording bit-rates available to encode yo
ページ10に含まれる内容の要旨
# $
This DVD player has many interesting features that allow it to be used effectively in a whole range of audio and home theater systems. Following the system design section the individual features of the front and rear panel will be described. This player can be distinguished from most others in three ways. First it includes an eight channel volume control. This allows it to be used independently with nothing but amplifiers, speakers and a display. Second, it incl
ページ11に含まれる内容の要旨
Add to a complex home theater The player provides a simple way to add into most home theater systems, even if quite complex. Existing Identify the cables running to the amplifiers. Unplug them and plug them into the 8 channel Display AMPs System input on the player. Now run new cables from the player outputs to the amplifiers taking care that each channel is looped through the player in the same order. Now find the video going to Video Audio Video the monitor or projector. Also loop it throu
ページ12に含まれる内容の要旨
& The most important feature of the rear panel is a small toggle switch near the power connection labelled ON AUTO and OFF. It controls the audio pass-through. toggle switch on position - In this position, the 8 VOLUME CONTROLLED ANALOG AUDIO OUTPUTS always output the sound made by the player. Even when the player is off, the pass-through feature is disabled. This position should be selected only when the pass-through feature is not used or during troubleshooting operations a
ページ13に含まれる内容の要旨
In this case, you must hook up the player with a composite or S output and program the component output to interlace using the remote. COMPOSITE VIDEO OUT (C) - Standard video output that you can connect to your TV or Projector. S-VIDEO OUT (S) - S-Video output that you should use instead of the VIDEO OUT jack if possible.. Analog Audio Outputs 8 VOLUME CONTROLLED ANALOG AUDIO OUTPUTS – They are designed to drive any high-end Amplifier directly. Two outputs are extra channels and can be progr
ページ14に含まれる内容の要旨
The IEEE1394 Network IEEE 1394 - Two 4-pin, S400 connectors are provided for connection to a firewire DAC or to IEEE1394-equipped receivers and other components. Each IEEE connector acts simultaneously as both input and output. All data formats are output. If you have a receiver with an IEEE1394 connector, you can connect it to this player using the supplied IEEE1394 cable. The IEEE1394 connector outputs every kind of digital audio that the player is compatible with, including DVD-Video, DVD-Au
ページ15に含まれる内容の要旨
$
OPEN/CLOSE - Press to open or close the disc tray (when in standby, this button will also switch the power on). STOP - Press to stop the disc (you can resume playback by pressing (>) (play). PLAY / PAUSE - Press to start or resume playback. If playing, press to pause playback. Press again to restart. (when in standby, this button will also switch the power on). FORWARD SCAN - Press and hold for fast forward scanning. REVERSE SCAN - Press and hold for fast reverse scanning.
ページ16に含まれる内容の要旨
10 CHP - Indicates that the character display is showing a DVD chapter number 11 REMAIN - Lights when the character display is showing the time or number of tracks/titles/ chapters remaining 12 Character display 13 II - Lights when a disc is paused 14 (arrow right) - Lights when a disc is playing 15 DD - Lights when a Dolby Digital soundtrack is playing 16 DTS - Lights when a DTS soundtrack is playing &
Simple Volume Remote The Simple MSB remote contains two functions. The top ban
ページ17に含まれる内容の要旨
25 CLEAR - Press to clear a numeric entry 26 ENTER - Press to select an option or execute a command TV Control - These buttons control the volume control part of the Player. Press FUNC to select the TV for remote control operation VOLUME UP AND DOWN – These buttons adjust the main volume control, changing all the channels at the same time. Can be activated on the front panel or remote. They are also used to adjust the trim levels while in the setup mode. Each button click is 1db change. Each
ページ18に含まれる内容の要旨
( #)$)
$
#
Setup Operations Setup involves two parts. First, the overall configuration is chosen and any internal switches can be set as shown. Then the final levels are set during playback later. These setup features are for the more advanced user. Most setup parameters can be done using the menus. Configuration Options The Player can be configured for audio and home theater applications. We have listened to this product in the most demanding audio syste
ページ19に含まれる内容の要旨
24 $
#
L Main R Main 6 dB cut 6 dB cut 6 dB cut 6 dB cut Trim Trim Low Pass Low Pass Low Pass Low Pass Filter Filter Filter Filter 1 1 1 1 2 2 2 2 3 3 3 3 4 on 4 on 4 on 4 on A2 A1 S C LR RR LF RF A2 A1 S C LR RR LF RF 1 L Main 1 R Main 1 R Main 1 R Main In In In In In In In In Out Out Out Out Out Out Out Out 2 L Rear 2 R Rear 2 L Main 2 L Main 3 Aux C 3 Aux C 3 Aux C 3 Aux C 4 Aux S 4 Aux S 4 Aux S 4 Aux S AUX. 2 AUX. 1 AUX. S AUX. C L Main R Main 6 dB cut
ページ20に含まれる内容の要旨
3
,)25 )4
L Main R Main 6 dB cut 6 dB cut 6 dB cut 6 dB cut
6 Trim Trim Low Pass Low Pass Low Pass Low Pass Mono Filter Filter Filter Filter Stereo Sub Sub 1 1 1 1 2 2 2 2 3 3 3 3 4 on 4 on 4 on 4 on 1 L Main 1 R Main 1 R Main 1 R Main A2 A1 S C LR RR LF RF A2 A1 S C LR RR LF RF 2 L Rear 2 R Rear 2 L Main 2 L Main In In In In In In In In Out Out Out Out Out Out Out Out 3 Aux C 3 Aux C 3 Aux C 3 Aux C 4 Aux S 4 Aux S 4 Aux S 4 Aux S AUX. 2 AUX.
