ページ1に含まれる内容の要旨
Contents
Introduction
Entertainment for the new millennium ................................................. 6
Introduction ................................................................................................. 7
Unpacking ..................................................................................................... 7
Placement ..................................................................................................... 7
Functional overview
Front panel ............
ページ2に含まれる内容の要旨
Introduction Entertainment for the new millennium Video was never like this before! Digital video discs provide perfect digital, studio-quality pictures; three dimensional digital, multi-channel audio; story sequences screened from your choice of camera angle; sound tracks in as many as eight languages; and up to 32 subtitles (if available on disc). Whether you watch DVD-Video on wide-screen or regular TV, you always see it the way it was meant to be. Digital video DVD-Video uses state-of-the-ar
ページ3に含まれる内容の要旨
/ Video CD You will recognize Video CDs by the logo shown at left. Depending on the material on the disc (a movie, video clips, a drama series, etc.) the disc may have one or more tracks. Tracks may have one or more indexes, as indicated on the disc case. To make playback easy and convenient, your player lets you select tracks and indexes. Super VCD SVCD discs based on the Super VCD IO Standard based on the Standard of the Electronics Industry of the People’s Republic of China. Audio CD Audio CD
ページ4に含まれる内容の要旨
Functional overview Front panel STANDBY-ON - switches the player to Standby mode or ON Standby indicator - lights red when the player is in Standby mode Display - shows the current status of the player T - NEXT title/chapter/track 2 PLAY - starts video/audio play S - PREVious title/chapter/track SOUND - selects Stereo, Dolby Surround or 3D-Sound DVD 701 DVD/VIDEO CD/CD PLAYER STANDBY-ON SOUND PLAY TITLE CHAPTER TRACK TOTAL TRACK TIME VCD A -B REPEAT SHUFFLE CHAPTER TITLE TRACK PREV NEXT OPEN / C
ページ5に含まれる内容の要旨
Rear panel MAINS (AC) power jack - connect to the power source Digital audio out jack (coaxial) - connect to digital (coaxial) equipment Audio / L/R (Left/Right) - connect to an amplifier, receiver or stereo system Video Out (CVBS) - connect to a TV with CVBS video inputs SCART (AUX) - connect to a VCR TV OUT (TV) - connect to a TV with SCART I AUX/VCR IN DIGITAL AUDIO OUT STEREO OUT PCM/MPEG2/AC3/DTS II TV OUT MAINS R L (CVBS) DIG OUT AUDIO OUT VIDEO OUT Caution: Do not touch the inner pins of
ページ6に含まれる内容の要旨
Display DVD inserted VCD Video CD or Audio CD inserted Indicates current player function: Play, Pause, Search, etc. DVD TITLE number TITLE DVD CHAPTER number CHAPTER VCD/CD TRACK number TRACK TRACK TIME in hours, minutes and seconds TRACK TIME TOTAL TIME in hours, minutes and seconds TOTAL TIME CHAPTER TRACK TOTAL TRACK TIME TITLE A -B SHUFFLE CHAPTER TITLE TRACK VCD SCAN REPEAT REPEAT CHAPTER/TITLE/TRACK active Remote control active (flashing) FTS active A-B REPEAT REPEAT A-B active SHUFFLE SHU
ページ7に含まれる内容の要旨
Remote control 0-9 numerical key pad STANDBY-ON 2 (ON/OFF) RETURN - go back to previous menu MENU DVD 12 - access menu of a DVD 3 OK - acknowledge menu selection MENU OSD 4 5 6 - access or remove On-screen t u w v display 8 9 - (left/right/up/down) cursor 7 - bit rate indicator* MENU MENU movement DVD OSD 0 RETURN OK Q O Z - search backward* / previous - subtitle language selector chapter or track Y 9 - audio language selector - stop i W 2 - select title T-C - play X R P à á - select chapter -
ページ8に含まれる内容の要旨
On screen display information Menu bar/Status window V Personal Preferences f Slow motion W Title/Track g Fast motion X Chapter/Index h Time search Y Audio language Z Subtitle language } Angle a Zoom c Video Program d Sound e Picture by Picture Status window icons The status window displays the current status of the player and appears with the first part of the menu bar. (You must activate this in the Features Menu - see Personal Preferences for details). General Disc type Tray status Default sc
ページ9に含まれる内容の要旨
Temporary Feedback Field icons Repeat All Repeat Title Repeat Track Repeat Chapter Shuffle Shuffle Repeat Repeat A to end Repeat A-B Angle Child Lock On Child Safe Resume Action prohibited ON SCREEN DISPLAY INFORMATION 13
ページ10に含まれる内容の要旨
Preparation General notes - Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Possible connections are shown in the following drawings. - Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. - Do not connect your DVD-player via your VCR. The video quality could be distorted by the copy protection system. - For better sound reproduction, connect the player’s audio out
ページ11に含まれる内容の要旨
+ - + - Connecting to an A/V receiver equipped with a multi- channel decoder (Dolby Digital™(AC-3), MPEG 2 and AMPLIFIER DTS) Digital Multi-channel sound Digital multi-channel connection provides the best sound quality. For this you TV need a multi-channel A/V receiver that supports one or more of the audio formats supported by your DVD player (MPEG 2, Dolby Digital™(AC-3), AC3 and DTS). Check the receiver manual and the logos on the front of the receiver. FE 1 Connect the DVD player’s digital a
ページ12に含まれる内容の要旨
NTSC/PAL Settings You can switch the NTSC/PAL setting of the DVD player to match the video signal of your TV. This setting only affects the television’s on-screen display that shows the stop and setup modes. You may select either NTSC or PAL. To change the DVD player setting to PAL or NTSC, follow the steps below. 1 Unplug the DVD player from the mains. 2 Press and hold 9 and T on the front of the DVD player. While holding 9 and T plug in the mains. 3 After PAL or NTSC appears on the display pan
ページ13に含まれる内容の要旨
- The various items can be selected by pressing the MENU OSD button, RETURN OK then the w/v keys or by pressing relevant keys on the remote control. - Pressing MENU OSD while the menu bar is displayed will clear the menu bar from the screen. i - When selecting an item in the menu bar, the selected item will be TC highlighted and the appropriate cursor keys to operate this item will be displayed below the icon. - < or > indicates that more items are available at the left/right of the menu bar. Pr
ページ14に含まれる内容の要旨
Audio language Initial Setup Initial Setup The sound will be in the language you choose if it is available on the disc in Subtitle language Audio language play. If the language you select is not available, speech will revert to the first English English spoken language on the disc. You can choose from different languages. Español Español Subtitle language Français Français The subtitles will be in the language you choose if it is available on the disc in Português Português play. If the language
ページ15に含まれる内容の要旨
- Video shift The factory centers the video on your screen. Use this setting to personalize the position of the picture on your TV by scrolling it to the left or right. Sound - Digital output Factory setting: ALL. This means that both coaxial and optical outputs are switched on. If you are not connecting equipment with a digital input, change the setting to OFF. If your equipment doesn't include a digital multi-channel decoder, set the digital output to PCM (Pulse Code Modulation). - Analog outp
ページ16に含まれる内容の要旨
Access control; child lock (DVD and VCD) Activating/deactivating the child lock 1 When disc playback is stopped, select Access Control in the features menu using the w/v keys. 2 Enter a 4-digit code of your own choice. 3 Enter the code a second time. 4 Move to “Child Lock” using the w/v keys. 5 Move to LOCK/UNLOCK using the u key. 6 Select LOCK using the w/v keys. 7 Press OK or t to confirm, then press t again to exit the menu. ➤ Now unauthorized discs will not be played unless the 4-digit code
ページ17に含まれる内容の要旨
Access control; Parental control (DVD-Video only) Movies on DVDs may contain scenes not suitable for children. Therefore, disc may contain ‘Parental Control’ information which applies to the complete disc or to certain scenes on the disc. These scenes are rated from 1 to 8, and alternative, more suitable scenes are available on the disc. Ratings are country dependent. The ‘Parental Control’ feature allows you to prevent discs from being played by your children or to have certain discs played wit
ページ18に含まれる内容の要旨
Changing the 4-digit code 1 When disc playback is stopped, select ACCESS CONTROL in the features menu using the w/v keys. 2 Enter the old code. 3 Move to CHANGE CODE using the w key. 4 Press the u key. 5 Enter the new 4-digit code. 6 Enter the code a second time and reconfirm by pressing OK. 7 Press t to exit the menu. Note: If you forget your 4 digit code, it can be cancelled by pressing 9 four times in the ‘Access Control’ dialog. You can then enter a new code (twice!) as described above. Pare
ページ19に含まれる内容の要旨
Operation Loading discs 1 Press OPEN/CLOSE on the front of the player. The disc tray opens. 2 Load your chosen disc in the tray, label side up (also when a double sided SOUND PLAY DVD is inserted). Make sure it is sitting properly in the correct recess. PREV NEXT OPEN / CLOSE PAUSE STOP 3 Press OPEN/CLOSE, to close the tray. ➤ READ appears in the status window and on the player display, and playback starts automatically. Note: If ‘Child Lock’ is set to ON and the disc inserted is not in the ‘chi
ページ20に含まれる内容の要旨
Playing a Video CD Playing a disc - After inserting the disc and closing the tray, playback starts automatically and the status window and the player display show the type of disc loaded, as well as information about the disc’s contents and playing time. - The disc may invite you to select an item from a menu. If the selections are numbered, press the appropriate numerical key. - The currently playing track number is displayed in the menu bar and the player display. The elapsed playing time is s
