ページ1に含まれる内容の要旨
MCD735
DVD Micro Theatre
pg001-040_MCD735_93_Eng 1 2006.8.29, 14:44
ページ2に含まれる内容の要旨
CAUTION Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. BAND BAND 2 pg001-040_MCD735_93_Eng 2 2006.8.29, 14:44
ページ3に含まれる内容の要旨
Index English ------------------------------------------------ 4 -------------------------------------------------------- 41 Manufactured under license from Dolby Laboratories. "Dolby", "Pro-logic" and the double-D symbol are trademarks of Dolby Laboratories. MANUFACTURED UNDER LICENSE FROM DIGITAL THEATER SYSTEMS, INC. US PAT. NO 5,451,942,5,956,674, 5,974,380, 5,978,762 AND OTHER WORLDWIDE PATENTS ISSUED AND PENDING. "DTS" AND "DTS DIGITAL SURROUND" ARE RESISTERED TRADEMARKS OF DIGITAL THEATER
ページ4に含まれる内容の要旨
English Contents General Information Disc Operations Features .................................................................. 6 Playable Discs ...................................................... 21 Supplied accessories ............................................ 6 Playing discs ......................................................... 21 Environment information ................................... 6 Using the Disc Menu ......................................... 22 Installation .............
ページ5に含まれる内容の要旨
Contents System Menu Options Basic Operations ................................................ 27 General Setup Page..................................... 27~28 TV Display OSD Lang Screen Saver Audio Setup Page ........................................ 28~31 Speaker Setup SPDIF Output Dolby Digital Setup 3D Processing HDCD Night Mode Video Setup Page................................................ 31 Component TV Mode Quality Preference Page ........................................... 31~32 Parent
ページ6に含まれる内容の要旨
English General Information Features Supplied accessories – Remote control with two AAA batteries Your DVD Micro Theatre with 5.1-channel full digital amplifier creates the same dynamic sound – MW antenna qualities that you find in full-fledged cinemas and – FM wire antenna –5 satellite speakers incorporates some of the best features in home theater technology. –1 passive subwoofer including 1 subwoofer cable – A/V cord (R/W/Y) Other features include: Built-in DTS and Dolby Digital decoder, – Co
ページ7に含まれる内容の要旨
General Information Installation Maintenance ● Place the player on a flat, hard, and stable surface. ● When a disc becomes dirty, clean it with a cleaning cloth. DVD Player Wipe the disc from the center out, in a straight line. Power Amplifier ● Do not expose the player, batteries or discs to humidity, Stand rain, sand or excessive heat (caused by heating equipment or direct sunlight). Always keep the disc tray closed to avoid dust ● In a cabinet, allow about 10cm (4 inches) of free on the lens.
ページ8に含まれる内容の要旨
English Connections IMPORTANT! Step 2: Connecting speakers – The type plate is located at the and subwoofer bottom of the system. – Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made. –Never make or change any connections with the power switched on. Step 1: Placing the speakers and subwoofer Center speaker and DVD system 2 Front speaker Front speaker (Left) (Right) 1 1 1 Connect the supplied front, rear and center speakers usi
ページ9に含まれる内容の要旨
Connections Using Component Video jacks (Y Pb Pr) Step 4: Connecting a TV IMPORTANT! IMPORTANT! – The progressive scan video quality is –You only need to make one video only possible when using Y Pb Pr, and a connection from the following options, progressive scan TV is required. depending on the capabilities of your TV. – Connect the DVD system directly to the TV . Option 2 Using AV OUT jack Option 1 2 1 2 1 Use component video cables (red/blue/green - not supplied) to connect the DVD system's
ページ10に含まれる内容の要旨
English Connections Using S-Video jack Step 5: Connecting FM/MW antennas IMPORTANT! – If S-Video is used for DVD playback fix the claw into connection, the system’s VIDEO OUT the slot setting will need to be changed MW accordingly. 1 antenna Option 3 2 FM antenna 2 1 1 Connect the supplied MW loop antenna to the MW jack. Place the MW loop antenna on a shelf or attach to a stand or wall. 2 Connect the supplied FM antenna to the FM (75 Ω) jack. Extend the FM antenna and fix its end to 1 Use an
ページ11に含まれる内容の要旨
Connections Viewing and listening to the playback of Step 6: Connecting the power other equipment A cord ● Connect the system's AUX IN (R/L) jacks to the AUDIO OUT jacks on the other audio/visual device (such as a TV, VCR, Laser Disc player or cassette deck). Before starting operation, press SOURCE on the system to select AUX or press AUX on the remote in order to activate the input source. 1 Recording (digital) B ● Connect the system's COAXIAL jack to the ~ AC MAINS DIGITAL IN j
ページ12に含まれる内容の要旨
English Functional Overview 9 0 4 1 3 2 5 6 7 8 Picture CD ........ during playback, press the DVD player and power amplifier control knob upward to select a 1 STANDBY ON B slide show mode. Tuner .................... press the control knob upward – switches the system on or to standby mode. to program preset radio stations. 2 IR SENSOR REPEAT•STEREO – point the remote control towards this sensor. Disc ....................... press the control knob 3 Control knob downward to repeat a track or 4 /
ページ13に含まれる内容の要旨
Functional Overview 7 BAND/9 – Disc: stops disc playback or erases a program. – TUNER: switches between MW and FM. – Demo mode (on the system and in the standby only): activates/deactivates the demonstration. 1 2 8 OPEN•CLOSE 3 – opens or closes the disc compartment. 9 VOLUME -/+ 5 – adjusts the volume upward/downward. 7 6 – adjusts the hours and minutes in clock/timer setting mode. 4 – switches the set timer ON or OFF. 8 9 0 n – connect a headphone 0 ! # @ $ % ^ & * ) ( ≤ ¡ £ ™ ∞ • ≥ § ª ¤ º ⁄
ページ14に含まれる内容の要旨
English Functional Overview @ TU +/- (à / á ) Remote control Tuner 1 B – press to tune to a lower/higher radio frequency – switches the system on or to standby mode. gradually. – press and hold, then release the key to start 2 0 automatic search for a radio frequency – opens or closes the disc compartment downward/upward. 3 Numeric Keypad (0-9) Disc – inputs a track/title/chapter number of the disc. – searches backward/forward in a disc at different 4 PROG speeds. – DVD/VCD/CD: enters the progra
ページ15に含まれる内容の要旨
Functional Overview ¡ SUBTITLE – selects a subtitle language. ™ ANGLE – selects a DVD camera angle. £ DISPLAY – displays information on TV screen during playback ≤ AUDIO for VCD – sets Stereo, Mono-Left or Mono-Right sound mode. for DVD – selects an audio language. ∞ A-B – repeats playback of a specific section on a disc. § MODE – selects various repeat modes or the shuffle play mode for a disc. ≥ SLOW – selects different slow playback modes for a VCD/SVCD/DVD. • DBB – enables or disables bass e
ページ16に含まれる内容の要旨
English Getting Started 1 Switch the DVD system on and then select Step 1: Inserting batteries into DISC source. (See “Switching the system the Remote Control on/off”). 3 2 Turn on the TV and set to the correct video-in channel. You should see the blue Philips DVD 1 background screen on the TV. ➜ Usually these channels are between the 2 lowest and highest channels and may be called FRONT, A/V IN, or VIDEO. See your TV manual for more details. 1 Open the battery compartment. ➜ Or, you may go to
ページ17に含まれる内容の要旨
Getting Started 6 Press 1 2 repeatedly to select "VIDEO 1 Turn off your TV progressive scan mode or turn SETUP PAGE". on to interlaced mode (refer to your TV user manual). 7 Select "TV MODE" to "P-SCAN", then OK to confirm. 2 Press SYSTEM on the remote to exit the ➜ The instruction menu appears on the TV. system menu and then DISC and “1” to exit progressive scan. ➜ The DVD blue background screen will appear on the TV. 1. ENSURE TV HAS P-SCAN. 2. CONNECT YPRPB CABLE. 3. IF TV ABNORMAL: W
ページ18に含まれる内容の要旨
English Getting Started Setting the Audio, Subtitle and Disc Step 4: Setting language Menu language preference You can select your own preferred language settings. This DVD system will automatically switch to the selected language whenever you load a disc. If the language selected is not available on the disc, the disc’s default language will be used instead. The OSD language in the system menu will remain once selected. Setting the OSD Language 1 Press SYSTEM in stop mode. 2 Press 1 2 to select
ページ19に含まれる内容の要旨
Basic Operations Switching the system on/off Sound Control ● Press STANDBY-ON B (B on the remote). DBB and DSC sound features cannot be ➜ “HELLO” is displayed briefly. The system will activated at the same time. switch to the last selected source. DBB (Dynamic Bass Boost) ● Press DISC, TUNER or AUX on the remote. ➜ The system will switch to the selected source. DBB enhances the bass response. ● Press DBB on the remote to enable/disable To switch the system to standby mode DBB feature. ● Press ST
ページ20に含まれる内容の要旨
English Basic Operations Dimming the display screen ● In standby mode only, press DIM repeatedly to select different levels of brightness for the display screen. Demonstration mode The system has a demonstration mode that shows the various features offered by the system. To activate the demonstration ● In standby mode, press BAND/9 on the system to activate the demo mode. ➜ Demonstration will begin. To deactivate the demonstration ● Press BAND/9 on the system again. ➜ “DEMO OFF” is displayed. No
