ページ1に含まれる内容の要旨
USER MANUAL
RTB1013
It's important to read this instruction prior to using your new product for the fi rst time.
ページ2に含まれる内容の要旨
FCC Information This device complies with part 15 of the FCC Ventilation You must adequately ventilate the product. Make Rules. Operation is subject to the following two sure there is adequate space around the unit to conditions: (1) This device may not cause harmful provide proper air flow for ventilation. See dia- interference, and (2) this device must accept any gram. interference received, including interference that may cause undesired operation. 7 cm This equipment has been tested an
ページ3に含まれる内容の要旨
Important Information THE LIGHTNING FLASH AND ARROWHEAD WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF “DANGEROUS VOLTAGE” IN- SIDE THE PRODUCT. THE EXCLAMATION POINT WITHIN THE TRI- ANGLE IS A WARNING SIGN ALERTING YOU OF IMPORTANT INSTRUCTIONS ACCOMPANYING THE PRODUCT. SEE MARKING ON BACK OF PRODUCT CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SER- VICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT
ページ4に含まれる内容の要旨
Important Information Important Battery Information CAUTION: This product utilizes a laser. Use of controls or • Do not mix diff erent types of batteries or new and adjustments or performance of procedures other old batteries. Do not use rechargeable batteries. than those specified may result in hazardous • In order to avoid any risk of explosion, observe the radiation exposure. Do not open covers and do polarities indicated inside the battery compartment. not repair yourself. Refer servic
ページ5に含まれる内容の要旨
Important Safety Instructions Please Read and Save for Future Reference. Additional Safety Information Some of the following information may not apply • The apparatus shall not be exposed to dripping or to your particular product; however, as with any splashing and that no objects fi lled with liquids, electronic product, precautions should be observed such as vases, shall be placed on the apparatus. • Always leave suffi cient space around the product during handling and use. for ventilation. D
ページ6に含まれる内容の要旨
Features • Full high-defi nition video playback at up to 1080p resolution for an amazing viewing experience. Upconversion of standard defi nition DVDs for enhanced picture quality at up to 1080p over an HDMI connection. • Rich multi-channel surround sound. • Easy and simple HDTV connection using a single HDMI cable (cable not included). • Multiple outputs for connecting your home theater system or amplifi er. • PIP functionality that lets you display primary and secondary video at the same time
ページ7に含まれる内容の要旨
Connections and Setup Method 2 (good) Connecting the Antenna Component video jacks (Pr, Pb, Y) • The component video jacks are color-coded FM antenna green, blue and red. • Additional component video cables (not supplied) The FM antenna connects to the FM terminal on the are required. They are usually color-coded green, system’s back panel. It must be hooked up in order blue and red. to receive clear reception. • Connect the component video OUT jacks on the unit to the component video IN j
ページ8に含まれる内容の要旨
Connections and Setup Connecting AUDIO IN from External Connecting your player to a wired net- Sources such as TV work router (optional) Connect an Ethernet cable (CAT5 or better with Method 1 (best) RJ45 connector) to the ETHERNET jack on the back Using Digital Optical Input of your player and to an Ethernet jack on a network Connect components capable of outputting hub or broadband router. Dolby digital surround sound (e.g. TV or SAT/Cable Box) or standard PCM (stereo) format digital sig
ページ9に含まれる内容の要旨
Connections and Setup Connecting the Speakers Speaker wires are color-coded to match the terminals. Connect the speaker wire from the back of each speaker to the corresponding color terminal at the back of the unit. Press down the tab to open the terminal and insert the wire. Release the tab to lock wire in the terminal. Center Speaker Front Speakers Right Left Subwoofer Green and Black Red and White and Black Purple and Black Black Insert Press Gray and Black Blue and Black Release Right Left
ページ10に含まれる内容の要旨
Connections and Setup Positioning Speakers Front Speaker Placement For best results, follow the speaker placement 3 below. 1 Alignment Align the center speaker evenly with (A) or slightly behind (B) (the left and right speakers), but not 2 ahead of them. 1 4 3 Courtesy Dolby Laboratories 1. Left, Right (Front Speakers) Front speakers carry primarily music and sound eff ects. 2. Center In surround mode, the center speaker carries most of the dialog as well as music and eff ects. It should be s
ページ11に含まれる内容の要旨
Connections and Setup No adjacent walls Better Surround Placement Surround speakers can go on stands facing each Location other to approximate sidewall mounting (A), or to If possible, place surround speakers to either side of the sides or rear of the viewing area, aimed upwards; the listening area, not behind it. they can go right on the fl oor, or preferably, a few Height feet off the fl oor such as on end tables (B). If space permits, install surround speakers 2-3 feet above viewers. This
ページ12に含まれる内容の要旨
Overview of Controls ON/OFF Press to turn on your unit, or put your unit in standby mode. When your unit is in standby mode, power is still entering your unit. To disconnect power, unplug the power cord. OPEN/CLOSE Press to open or close the disc tray. R(red), When playing a Blu-ray Disc that has a Java application, G(green), press to control playback. For more information, see the B(blue), documentation that came with the Blu-ray Disc. Y(yellow) Numbers In playback mode, press GOTO butto
ページ13に含まれる内容の要旨
Overview of Controls MEM/ANGLE Stores a station in tuner mode. Accesses the camera angle function for Blu-ray or DVD discs if available. ZOOM Press to zoom in on the video. Each time you press this button, the magnifi cation level changes. This button is only used for DVD discs . REPEAT Press to repeat the current title, chapter, track, or repeat all. A - B Performs point-to-point repeat playback on DVD. PiP Press to turn PiP (picture in picture) mode on or off . This function is only availa
ページ14に含まれる内容の要旨
Quick Setup When turned on for the fi rst time or after resetting 4. Press or button to select HDMI Auto, 1080p, it to the factory default, the Quick Setup menu will 1080i , 720p, 480p or 480i and press OK. pop up as following. (For details about the Resolution, please see page 21.) Would you like to do Quick Setup? 5. Press button to select “Next” and press OK, then the display for TV Aspect selection Yes No appears. TV Aspect Follow the below steps to make the basic settings for 16:9 Wid
ページ15に含まれる内容の要旨
Playing a Blu-ray Disc or DVD Regional Coding the beginning of the disc. This unit has been designed to play back BD-video Accelerated play encoded for region “A” and DVD-video encoded for • To fast forward or fast reverse, press (fast region “1”. You cannot play back BD-video or DVD- forward) or (fast reverse). video that are labeled for other regions. Look for the • Each time you press one of these buttons, the symbols on the right on your BD-video or DVD-video. fast-forward or fa
ページ16に含まれる内容の要旨
Special Functions Searching for a title, chapter or elapsed time Selecting a play source 1. During playback, press GOTO button one or • Press SOURCE button on the front panel of the more times to select a search mode. unit repeatedly to select BD/USB, OPTICAL, • Press once to select the Goto Title mode. AUX, TUNER. • Press twice to select the Goto Chapter mode. • Press BD/USB button on the remote control to • Press three times to select the Goto Time select BD/USB mode. mode. • Press OPTIC
ページ17に含まれる内容の要旨
Playing an audio CD Playing fi les on a data disc 1. Press ON/OFF button on the remote control or To view JPEG fi les ON/STANDBY button located on the unit’s front 1. Press or button to select Pictures, then panel. press OK button. 2. Press OPEN/CLOSE button to open the disc tray. 2. Press , , or button to select a fi le (or 3. Place a CD on the disc tray with the label facing a folder) and press OK or button to start up, then press OPEN/CLOSE button to close playback. If you selected
ページ18に含まれる内容の要旨
Watching movies with Netfl ix Using a USB device Playing USB fl ash (“thumb”) drive Watching Movies with Netfl ix Insert a USB thumb drive containing picture into To use Netfl ix service, connect this player to your your unit. A selection menu appears on the screen: network, and confi gure the network settings if they are not fi nished yet. (See “Network Setting” section on page 24). Launching Netfl ix movie 1. In home menu, press or button to select Settings Connected. 2. Press button
ページ19に含まれる内容の要旨
Watching movies with Netfl ix Preparing Instant Queue To play streaming video via Netfl ix service, Netfl ix service, you must have an appropriate Netfl ix Note subscription and the player needs to be registered Resolution of video streamed from Netfl ix for Netfl ix service. See previous section for details varies depending on communication speed or on how to activate. bitrate of each content, etc. Now you can view Netfl ix streaming video. After having activated Netfl ix player and prepared I
ページ20に含まれる内容の要旨
Enjoying BD-Live AUX/OPTICAL Some BD-ROMs contains BD-Live features that You can connect Audio or Audio-Video devices such as a TV, Game System, VCR, Satellite or Cable Box can be downloaded to the external memory (local storage) for enjoyment. to this unit using the AUDIO IN jacks at the back of the unit. The AUX input provides an analog audio In order to access BD-Live functions, the Blu-ray connection especially suitable for older devices. The disc player must be properly confi gured f
