ページ1に含まれる内容の要旨
OPERATINGINSTRUCTIONS
V-756
DVD PLAYER
ページ2に含まれる内容の要旨
Introduction FOR U.S.A. UNPACKING AND INSTALLATION FCC INFORMATION This equipment has been tested and found to comply with Congratulations on Your Purchase! the limits for a Class B digital device, pursuant to Part 15 of Your new DVD Player is designed to deliver maximum the FCC Rules. These limits are designed to provide enjoyment and years of trouble free service. reasonable protection against harmful interference in a Please take a few moments to read this manual thoroughly. It residential
ページ3に含まれる内容の要旨
READ THIS BEFORE OPERATING YOUR UNIT FOR U.S.A. AND CANADA 120 V FOR OTHER COUNTRIES .......................................... 115 V/230 V FOR YOUR SAFETY FOR YOUR SAFETY Units shipped to the U.S.A. and Canada are Units shipped to countries other than the above designed for operation on 120 V AC only. countries are equipped with an AC voltage selector switch on the rear panel. Refer to the following Observe all safety precautions with use of a paragraph for the proper setting of this switch. p
ページ4に含まれる内容の要旨
CONTENTS Introduction UNPACKING AND INSTALLATION 2 READ THIS BEFORE OPERATING YOUR UNIT 3 System Connections CONNECTING TO A/V AMPLIFIER OR RECEIVER 5 CONNECTING TO TV WITH AUDIO AND VIDEO INPUTS 7 CONNECTING TO ADDITIONAL COMPONENT WITH VIDEO AND DIGITAL OUTS 7 CONNECTING SYSTEM CONTROL 8 CONNECTING TO TV AND VCR WITH SCART CONNECTORS (Regional Option) 9 Front Panel & Remote Controls 10 REMOTE CONTROL OPERATION RANGE 12 LOADING BATTERIES 12 Preliminary Knowledge About Discs P
ページ5に含まれる内容の要旨
System Connections Plase make all connections to this DVD player before plugging in the AC cord. Since different components may have different names for the same inputs and outputs, carefully read the operating instructions of any component to be connected to this player. Please follow all color coding when making the audio and video connections. The video output of this player can be optimized to fit your TV screen. Please select either 4:3 or 16:9. (refer to “SETTING THE TV SCREEN” on page
ページ6に含まれる内容の要旨
1. Connecting MIXED AUDIO OUTs 1 4. Connecting the 6.1 CH AUDIO OUTs Connect these jacks to the DVD (, AUX, etc.) IN jacks of your This DVD player has built-in multi-channel digital decoders for amplifier or receiver. DTS, Dolby Digital, Dolby Pro Logic, MPEG Multichannel and Notes : Circle Surround including the 6.1 Extended Surround versions While playing back a disc containing multi-channel signal of both DTS and Dolby Digital so you can enjoy high-quality audio and surround sound without th
ページ7に含まれる内容の要旨
CONNECTING TO TV WITH AUDIO AND VIDEO INPUTS You can enjoy DVD Videos by simply connecting this unit to a TV. To hear improved audio sound quality, connect the MIXED AUDIO OUTs 1 to your amplifier or receiver. To connect these jacks correctly, refer to “Connecting MIXED AUDIO OUTs 1” and “Connecting VIDEO OUTs” on the previous page. Note : If your TV has only a monaural audio input instead of stereo, you will need to use an optional audio cord which converts stereo audio output to monaural.
ページ8に含まれる内容の要旨
CONNECTING SYSTEM CONTROL Connect this jack to the DIGI LINK jack of some Sherwood receivers such as RV-5106/R, RD-6106/R, RD- 7106/R, R-756/R, R-956/R, etc. that uses the DIGI LINK III remote control system. (For details, refer to the operating instructions of that unit.) When connecting this jack to the DIGI LINK jack of some Sherwood receivers such as RV-5106/R, RD-6106/R, RD-7106/R, R-756/R, R-956/R, etc., only this unit does not respond to system power control due to the auto play featur
ページ9に含まれる内容の要旨
CONNECTING TO TV AND VCR WITH SCART CONNECTORS (Regional Option) For some countries like Europe, the unit incorporates the TV and VCR SCART connectors. You can connect the unit to TV and VCR easily using the SCART connections without other cumbersome audio and video connections. During operation of the unit, these connectors can deliver either the regular video and RGB signals or the S- video (Y and C) signals as well as the mixed audio L and R signals. To obtain the highest picture quality,
ページ10に含まれる内容の要旨
Front Panel & Remote Controls Front Panel Controls 1 2 5 7 8 9 13 14 34 35 36 11 10 6 Remote Controls 18 4 7 3 20 21 16 23 17 22 24 11 25 8 9 10 26 12 19 27 15 28 29 30 32 31 33 10 ENGLISH
ページ11に含まれる内容の要旨
1. POWER SWITCH 22. MENU BUTTON Press to turn the power of the unit between the standby Press to display the DVD menu on the TV screen. and off modes. 23. SETUP BUTTON 2. STANDBY indicator. In the stop mode, press to adjust the initial settings of Lights up in the standby mode and goes off in power on the unit on the TV screen . mode. 24. CURSOR ( ) / ENTER BUTTON 3. POWER BUTTON Tilt in the desired direction to select an item in the on- Press to turn the power of the unit fro
ページ12に含まれる内容の要旨
FLUORESCENT DISPLAY REPEAT INDICATORS PROGRAM INDICATOR SURROUND MODE INDICATORS CD/DVD INFORMATION INDICATORS LAST MEMORY INDICATOR MULTI-INFORMATION DISPLAY REMAINING TIME INDICATOR SPEAKER INDICATORS ANGLE INDICATOR PLAY/PAUSE INDICATORS REMOTE CONTROL OPERATION RANGE Use the remote control unit within a range of about 7 meters (23 feet) and angles of up to 30 degrees aiming at the remote sensor. LOADING BATTERIES Remove the cover. Load two size “AAA” batteries matching the polarity. 1 2
ページ13に含まれる内容の要旨
Preliminary Knowledge About Discs Markings on the DVD Videos PLAYABLE DISC TYPES Mark Description This unit can play back discs bearing any of the following marks : Indicates the region code where the disc can be played back. DVD VIDEO CD Number of audio languages recorded with Logo mark multiple audio languages. The number in the mark indicates the number of audio 3 (8 cm) / 3 (8 cm) / languages. (Up to 8 languages) Disc size 5 (12 cm) 5 (12 cm) Played sides One or both One side only Numb
ページ14に含まれる内容の要旨
SYMBOL AND MESSAGE ABOUT INVALID CARE AND HANDLING OF DISCS OPERATION In handling a disc, hold it carefully by the edges. When you press a button, if the unit does not accept that operation, appears on the TV screen. Operations are occasionally unacceptable even if is not displayed. During operation, if the “WRONG REGION CODE” is displayed on the TV screen, it means the region Do not stick paper or write anything on the printed code number of the unit is different from that of the sur
ページ15に含まれる内容の要旨
Operations BASIC PLAYBACK Preparations Turn on the TV and select the video input source connected to the unit. To enjoy the sound of the disc from your audio system, turn on the audio system and select the input source connected to the unit. Set the TV screen type correctly to match your TV. The STANDBY indicator lights up. This means that Before operation, enter the standby the unit is connected to the AC mains and a small mode. Main unit 1 amount of current is retained to support operatio
ページ16に含まれる内容の要旨
To start playback from the menu To select the preferred item, tilt the CURSOR/ENTER button in the desired direction and press the CURSOR/ENTER button (or PLAY button), or press the NUMERIC buttons. In case of use of the NUMERIC buttons. RC RC when selecting “3” when selecting “12” RC RC RC Playback of the selected item starts. When using the NUMERIC buttons to select an item, it may be necessary, with some discs, to also press the PLAY (or ENTER) button to start playback of your selection.
ページ17に含まれる内容の要旨
To stop playback When playback is stopped, the unit memorizes the Main unit point where the STOP button was pressed RC (RESUME function). Press the PLAY button again, and playback will or resume from this point. When the disc tray is opened or the STOP button is pressed again, the RESUME function will be cleared. During playback of a disc, if either the OPEN/CLOSE button or the POWER button is pressed by mistake, etc., playback may also be resumed from the memorized point on the disc by press
ページ18に含まれる内容の要旨
Rapid (/slow) advance / reverse playback during playback Each time the FORWARD SEARCH button is pressed, the You can play back discs at various speeds. speed increases by up to 5 steps depending on the discs as follows; Main unit (1/8 x 1/2 x ) 2 x 8 x (16 x ) off To reverse To advance To reverse To advance RC Each time the BACKWARD SEARCH button is pressed, the speed increases by up to 4 steps depending on the discs as follows; (slower speed ) 2 x 8 x (16 x ) off or ( ) : DVD Vi
ページ19に含まれる内容の要旨
PLAYING THE DESIRED SECTION OF DISC (TITLE/CHAPTER/TRACK/TIME SEARCH) During playback, press the SEARCH button to select the preferred search mode. The on-screen symbols will be displayed 1 automatically, even if the on-screen display is turned off or not already visible. RC Each time this button is pressed, the search mode changes depending on the disc as follows; [(T--/3 C--/2) or T--/18] T --:--:-- OFF Title search Track search Chapter search Time search ( ) : DVD Vi
ページ20に含まれる内容の要旨
PLAYING A SPECIFIC ITEM [DVD Video only] When using a title menu If some DVD Videos which contain more than one title may have the menu like as a list of the titles, the TITLE button can be used to select the desired title. (The details of operation differ depending on the disc used.) During playback, press the TITLE button. RC Example Then a list of titles on the disc is displayed on TV 1 screen. TITLE MENU If the disc does not have a “list of titles” menu, Dogs Cats appears on the TV screen
