ページ1に含まれる内容の要旨
DVD/CD RECEIVER KD-AVX2
RECEPTOR CON DVD/CD KD-AVX2
RÉCEPTEUR DVD/CD KD-AVX2
EXTRA MONITOR CONTROL
MODE ASPECT MENU
DVD / RECEIVER CONTROL ASPECT
KD-AVX2
ATT ZOOM MENU A
+10
SOURCE
–100 +100
BAND
–10 DIRECT
SRC D DISP
ASPECT
DUAL OSD
VOL 123 DISC+
TOP M MENU
2nd VOL 456
ENTER
78 DISC– 9
7 / BACK
SETUP RETURN
BAND ENT
0 SURROUND
SHIFT
RM-RK240
For canceling the display demonstration, see page 10.
Para cancelar la demonstración en pantalla, consulte la página 10.
Pour annuler la démonstration d
ページ2に含まれる内容の要旨
Thank you for purchasing a JVC product. How to reset your unit Please read all instructions carefully before operation, to ensure your complete This will reset the understanding and to obtain the best possible microcomputer. Your preset performance from the unit. adjustments will also be erased. INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to prov
ページ3に含まれる内容の要旨
WARNINGS: Caution on volume setting: • DO NOT install any receiver in locations Discs produce very little noise compared where; with other sources. Lower the volume – it may obstruct the steering wheel and before playing a disc to avoid damaging gearshift lever operations, as this may the speakers by the sudden increase of the result in a traffic accident. output level. – it may obstruct the operation of safety devices such as air bags, as this may result in a fatal accident. – it may obst
ページ4に含まれる内容の要旨
Introduction—Playable discs Discs you can play Discs cannot be played back You can play back the following discs—12 cm DVD-ROM (data), DVD-RAM, DVD-R/DVD- (4-3/4") and 8 cm (3-3/16")—on this receiver: RW recorded in the DVD-VR format, CD- • DVD Video: Recorded in NTSC color system ROM, CD-I (CD-I Ready), Photo CD, etc. with Region Code “1” (see below). • Playing back these discs will generate noise – DVD-R/DVD-RW recorded in the DVD- and damage the speakers. Video format can also be played. •
ページ5に含まれる内容の要旨
Contents How to read this manual The following methods are used to make the Control panel ............................... 6 explanations simple and easy-to-understand: Remote controller — RM-RK240 ....... 7 • Some related tips and notes are explained in “More about this receiver” (see pages 54 Getting started ............................. 10 – 58). Radio operations .......................... 12 • Button operations are mainly explained Disc operations ............................. 15 with th
ページ6に含まれる内容の要旨
Control panel Parts identification Monitor u indications r t Ex.: Source screen on JPEG playback i y 1 58 6 2 3 4 7 ASPECT KD-AVX2 MENU A SRC D DISP 7 / BACK BAND ENT 9 p q w e 1 (standby/on attenuator) button Monitor indications 2 • +/– (volume +/–) button r Source indicator • SRC (source) button t Main display • DISP (D: display) button y Clock display 3 Remote Sensor Also indicates volume level when adjusting 4 Monitor volume. 5 • 5 (up) / ∞ (down) buttons u Status indicators • 4/¢
ページ7に含まれる内容の要旨
How to detach/attach the control panel Detaching... Attaching... How to change the control panel angle Angle 4 Angle 1 Angle 2 Angle 3 Caution: Do not insert your finger behind the control panel. Remote controller — RM-RK240 Installing the lithium coin battery Before using the remote controller: (CR2025) • Aim the remote controller directly at the remote sensor on the receiver. Make sure there is no obstacle in between. Remote sensor • Do not expose the remote sensor to strong light (dir
ページ8に含まれる内容の要旨
Warning: IMPORTANT: • Do not install any battery other than If Dual Zone is activated (see page 30), CR2025 or its equivalent; otherwise, it may the remote controller only functions for explode. operating the DVD/CD player. • Store the battery in a place where children cannot reach to avoid risk of accidents. • To prevent the battery from over-heating, MONITOR CONTROL cracking, or starting a fire: 1 1 Monitor control buttons* – Do not recharge, short, disassemble, or • (standby/on), M
ページ9に含まれる内容の要旨
For FM/AM tuner operations: y Special function buttons • 5 / ∞ • DVD/VCD: (audio) – Changes the preset stations. • DVD: (subtitle), (angle) • 4 / ¢ • Also function as the SURROUND – Functions to search for stations. button when pressed with SHIFT button. Press briefly: auto search – You can change the surround mode (see Press and hold: manual search page 23). For Satellite radio operations: 1 * Controllable only if your monitor is one of the • 5 / ∞ JVC monitors — K
ページ10に含まれる内容の要旨
@ Adjust the equalizer as you want. Getting started (See pages 38.) Basic operations To drop the volume in a moment (ATT) ~ Turn on the power. To restore the sound, press it again. Ÿ SRC D DISP To turn off the power Canceling demonstration and setting You cannot select some sources if they the clock are not ready. 1 MENU 7 / BACK ! BAND 2 Select “Setup”, then, For FM/AM tuner 1 Select “Display”, “Demonstration”, then “Off” to cancel demonstration. 2 Select “Clock”, “Time Set”, and go t
ページ11に含まれる内容の要旨
• See the example on “Basic procedure of AV 4 Finish the procedure. Menu operation” below to change the clock from 12 hours to 24 hours. ENT Basic procedure of AV Menu operation You can adjust various settings of the unit from AV Menu. Ex.: To change the clock from 12 hours to 24 • To call up AV Menu... MENU hours, after pressing MENU... Displays remaining time to continue the menu operation Current menu Selected sub menu Select “Setup”, “Clock”, Selected item of the sub menu Sub menus
ページ12に含まれる内容の要旨
When an FM stereo broadcast is hard to Radio operations receive 1 MENU ~ SRC D DISP TUNER (FM1/2/3,AM) 2 Select “Mode”, “Mono”, then “On”. Ÿ 7 / BACK BAND Selected band appears. 3 Finish the procedure. ENT Lights up when receiving an FM stereo broadcast with sufficient Lights up when monaural mode is activated. signal strength. Reception improves, but stereo effect will ! Start searching for a station. be lost. To restore the stereo effect, repeat the same procedure to set “Mono” to “Off
ページ13に含まれる内容の要旨
3 Finish the procedure. Manual presetting After tuning in the station you want to preset... ENT 1 MENU Lights up when “Local” mode is activated. 2 Select “List”, then a preset number Only stations with sufficient signal strength (1–6) you want to store the station will be detected. into. To tune in to all receivable stations, repeat the same procedure to set “DX / Local” to “DX”. The LO indicator goes off and the DX indicator lights up. EX.: Storing 92.5 Storing stations in memory MHz
ページ14に含まれる内容の要旨
• You can change the preset list between Listening to a preset station FM1/2/3 by pressing and holding 5/∞ buttons (or by pressing 5/∞ buttons repeatedly) when selecting any of the FM 1 bands. SRC DISP D 3 TUNER (FM1/2/3,AM) ENT 2 7 / BACK BAND When using the remote controller... 3 Select a preset station (1 – 6) you want. or When using the list screen... After step 2 above... 1 MENU 2 Select “List”, then a preset number (1–6) you want. 14 AVX2EN_book.i AVX2EN_book.inndb 14 db 1
ページ15に含まれる内容の要旨
The following marks are used to indicate Disc operations the playable discs... Playing a disc in the receiver DVD Audio The disc type is automatically detected, and DVD Video DVD Audio Video CD with/without playback starts automatically (for DVD Video/ PBC Audio: automatic start depends on its internal program). JPEG MPEG MPEG Video CD with PBC MPEG disc JPEG disc If the current disc is an audio CD, CD Text, only MP3/WMA/WAV, JPEG, MPEG, or VCD without PBC, all tracks will be played repea
ページ16に含まれる内容の要旨
• When inserting a DVD video/DVD Audio • When inserting an MP3/WMA/WAV/JPEG/ 2 disc: MPEG disc* : Video/picture playback starts automatically After showing the total folder and file on the monitor when the parking brake is number... applied. Ex.: When an WAV file is detected • The screen such as below appears when Current folder/track pressing DISP (D). Format indication number Elapsed playing When an DVD is playing back time*3 Format indication Surround/Sound indication Current folder n
ページ17に含まれる内容の要旨
Basic operations Operations Monitor indication and/or next operation To stop playback When you start playback again, playback starts from where it has been stopped 7 / BACK (Resume play). BAND ENT To stop play temporarily Playback is paused. A still picture appears. MPEG MPEG A Frame by frame playback B Slow motion playback • No sound comes out during Slow Motion Playback. • When playing a VCD, Reverse Slow Motion Playback is prohibited. To resume normal play: To replay the previous The playba
ページ18に含まれる内容の要旨
To go to the next or previous chapters/tracks To locate a particular title/chapter/track directly • For DVD: During play or pause • For DVD Video/DVD Audio: During play or pause—select a chapter/ track. During stop—select a title/track. • For MP3/WMA/WAV/JPEG/MPEG: Select a track within the same folder. Select the number corresponding to the item To fast-forward or reverse the chapter/track you want (see page 9). While playing back... MP3 To locate a title/group/folder DVD WMA Audio WAV MP3
ページ19に含まれる内容の要旨
MP3 To locate a particular title/ To skip to the next or previous scene DVD WMA M MPEG PEG Audio WAV group/folder You can skip the scene back and forward by 5 minutes. MPEG MPEG JPEG Ex.: when you are playing a 24-minute MPEG Within 10 seconds, file and the elapsed playing time is 8’24”... press the number buttons (see page 9). Current playback position IMPORTANT: • For MP3/WMA/WAV discs: It is required that folders are assigned with 2-digit number at the beginning of their folder names
ページ20に含まれる内容の要旨
Unique disc functions Selecting subtitles You can select the language of the subtitle to be shown on the monitor. Selecting audio languages • You can set the initial subtitle language using the AV Menu (see page 34). For DVD: You can select the language to listen to if the disc has multiple audio languages. 1/3 ENGLISH 1/3 ENGLISH 1/3 ENGLISH 1/3 ENGLISH Ex.: When the disc has 3 options • For some DVDs and VCDs, changing the Ex.: When the disc has 3 options subtitle language, audio language
