ページ1に含まれる内容の要旨
CWT Series
Users Manual
www.microboards.com Version 2.2
ページ2に含まれる内容の要旨
CWT Series MICROBOARDS TECHNOLOGY, LLC 2
ページ3に含まれる内容の要旨
CWT Series MICROBOARDS TECHNOLOGY, LLC TABLE OF CONTENTS System Overview..................................................................................................5 Unpacking your system.........................................................................................5 Microboards Statement Regarding Improper Duplication .....................................5 Installation Requirements ...............
ページ4に含まれる内容の要旨
CWT Series MICROBOARDS TECHNOLOGY, LLC 4
ページ5に含まれる内容の要旨
CWT Series MICROBOARDS TECHNOLOGY, LLC System Overview The CWT Series employs up to 10 General Purpose CD recorders. An intuitive, menu driven display and 5-button control COPY START interface provide one-touch (DISC to DISC) operation for the novice user while providing advanced features for the professional. Advanced Features: • Stand-Alone CD-R duplicator • One Touch duplication • Auto Run option •
ページ6に含まれる内容の要旨
CWT Series MICROBOARDS TECHNOLOGY, LLC Installation Requirements System Setup • Connect the power cable to the CWT Series tower and plug in to a protected power outlet strip or UPS power supply. • Turn on power to the tower. The system is now ready to use. Install your CWT Series duplicator in the following environment: • On a level and stable surface • In a well ventilated location • Temperature and humi
ページ7に含まれる内容の要旨
CWT Series MICROBOARDS TECHNOLOGY, LLC Main Menu The Arrow buttons (▼▲) allow you to move forward or backward in the menu without selecting the current menu item. The NO button will move you to the next menu item. YES will select the current menu item. YES ANALYZING MASTER COPY 15:26 COPY START? (DISCtoDISC) CD-DA 20% NO, ▼ YES ANALYZING MASTER COPY 15:26 COPY CD
ページ8に含まれる内容の要旨
CWT Series MICROBOARDS TECHNOLOGY, LLC 3. Place the blank disc(s) into the Recorder drive(s) and wait 10 seconds for the light(s) on the front of the Recorder(s) to stop blinking. 4. Press YES. 5. The drive trays will open on any recorder without blank discs installed. If you do not want to make a copy in those drives, close the tray(s), wait for the drive light to go out, and then press the YES button to start the copy j
ページ9に含まれる内容の要旨
CWT Series MICROBOARDS TECHNOLOGY, LLC Setup Menu Yes Yes SETUP MODE SELECT? COPY? VERIFY? COPY + V? EXIT? COPY? (COPY MODE) (DISC to DISC) (DISC to DISC) (DISC to DISC) CD WR SPEED? Yes MAX? 48X? 4X? EXIT? MAX? (MAX) EXIT? ISRC ON? ISRC CHECK? Yes ISRC ON? ISRC OFF? (OFF) Yes Auto Run? ON? OFF? (OFF) Yes COPY QUANTITY? COPY QUANTITY? (xxxx/xxxx) 0--- Yes Session Mode? AUTO? CLOSE? OP
ページ10に含まれる内容の要旨
CWT Series MICROBOARDS TECHNOLOGY, LLC Setup Menu 1. At the COPY START? (DISC to DISC) menu, press the NO or ▼ button until the display shows SETUP? (MODE CHANGE) SETUP? (MODE CHANGE) 2. Press the YES button 3. The first setup option is Mode Select, followed by Write Speeds, ISRC Check, Copy Quantity, Session Mode, Drive Inquiry, Firmware Version and Exit. 4. Pressing the NO or ▼ button will allow you
ページ11に含まれる内容の要旨
CWT Series MICROBOARDS TECHNOLOGY, LLC Error Codes Read Errors ASC ASCQ Description 00 00 NO ADDITIONAL SENSE INFORMATION 00 06 I/O PROCESS TERMINATED, PLAY OPERATION ABORTED 00 11 AUDIO PLAY OPERATION IN PROGRESS 00 12 AUDIO PLAY OPERATION PAUSE 00 13 AUDIO PLAY OPERATION SUCCESSFULLY COMPLETED 00 14 AUDIO PLAY OPERATION STOPPED DUE TO ERROR 00 15 NO CURRENT AUDIO STATUS TO RETURN 00 17 CLEANINF REQUESTED 01 00 N
ページ12に含まれる内容の要旨
CWT Series MICROBOARDS TECHNOLOGY, LLC 20 00 INVALID COMMAND OPERATION CODE 21 00 LOGICAL BLOCK ADDRESS OUT OF RANGE 24 00 INVALID FIELD IN CDB 25 00 LOGICAL UNIT NOT SUPPORTED 26 00 INVALID FIELD IN PARAMETER LIST 26 01 PARAMETER NOT SUPPORTED 26 02 PARAMETER VALUE INVALID 26 03 THRESHOLD PARAMETERS NOT SUPPORTED 26 04 INVALID RELEASE OF ACTIVE PERSISTENT RESERVATION 28 00 NOT READY TO READY CHANGE, MEDIUM MAY HAVE CH
ページ13に含まれる内容の要旨
CWT Series MICROBOARDS TECHNOLOGY, LLC 4D NN TAGGED OVERLAPPED COMMANDS (NN=QUEUE TAG) 4E 00 OVAERLAPPED COMMANDS ATTEMPTED 53 00 MEDIA LOAD OR EJECTED FAILED 53 02 MEDIUM REMOVAL PREVENTED 55 00 SYSTEM RESOURCE FAILURE 57 00 UNABLE TO RECOVER TABLE-OF-CONTENTS 5A 00 OPERATOR REQUEST OR STATE CHANGE INPUT 5A 01 OPERATOR MEDIUM REMOVAL REQUEST 5B 00 LOG EXCEPTION 5B 01 THRESHOLD CONDITION MET 5B 02 LOG COUNTER AT MAXIM
ページ14に含まれる内容の要旨
CWT Series MICROBOARDS TECHNOLOGY, LLC 0C 03 WRITE ERROR-RECOMMEND REASSIGNMENT 0C 07 WRITE ERROR-RECOVERY NEEDED 0C 08 WRITE ERROR-RECOVERY FAILED 0C 09 WRITE ERROR-LOSS OF STREAMING 0C 0A WRITE ERROR-PADDING BLOCKS ADDED 11 00 UNRECOVERED READ ERROR 11 06 CIRC UNRECOVERED ERROR 15 00 RANDOM POSITIONING ERROR 15 01 MECHANICAL POSITIONING ERROR 15 02 POSITIONING ERROR DETECTED BY READ OF MEDIUM 16 00 DATA SYNCHRONIZAT
ページ15に含まれる内容の要旨
CWT Series MICROBOARDS TECHNOLOGY, LLC 29 01 POWER ON OCCURRED 29 02 SCSI BUS RESET OCCURRED 29 03 BUS DEVICE RESET FUNCTION OCCURRED 29 04 DEVICE INTERNAL RESET 2A 00 PARAMETERS CHANGED 2A 01 MODE PARAMETERS CHANGED 2A 02 LOG PARAMETERS CHANGED 2A 03 RESERVATIONS PREEMPTED 2B 00 COPY CANNOT EXECUSE SINCE HOST CANNOT DISCONNECT 2C 00 COMMAND SEQUENCE ERROR 28 00 NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED 29 0
ページ16に含まれる内容の要旨
CWT Series MICROBOARDS TECHNOLOGY, LLC 51 00 ERASE FAILURE 51 01 ERASE FAILURE - Incomplete erase operation detected 53 00 MEDIA LOAD OR EJECT FAILED 53 02 MEDIUM REMOVAL PREVENTED 55 00 SYSTEM RESOURCE FAILURE 57 00 UNABLE TO RECOVER TABLE-OF-CONTENTS 5A 00 OPERATOR REQUEST OR STATE CHANGE INPUT 5A 01 OPERATOR MEDIUM REMOVAL REQUEST 5A 02 OPERATOR SELECTED WRITE PROTECT 5A 03 OPERATOR SELECTED WRITE PERMIT 5B 00 LOG
ページ17に含まれる内容の要旨
CWT Series MICROBOARDS TECHNOLOGY, LLC Specifications Recorder Drive: CD-R/RW Recorder Power Source: 115V/230V 50-60Hz switchable power supply Weight: 58 pounds Dimensions: 7.48” (W) x 16.75” (D) x 24.5” (H) Power supply: 400W Environment: Temperature: 40 °C (104 °F) / 5 °C (41 °F) Humidity: 20% - 80% Supported Formats CD-ROM Mode 1, CD-ROM XA Mode 2 (form 1, form 2), Recording format CD Photo CD, CD-
ページ18に含まれる内容の要旨
CWT Series MICROBOARDS TECHNOLOGY, LLC Any unauthorized modification to this equipment may result in the revocation by the FCC of the user’s authority to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resident
