ページ1に含まれる内容の要旨
DVD-ROM DRIVE
PHONES
DVD BUSY
Operating instructions
Mode d’emploi
Bedienungsanleitung
Istruzioni per l’uso
DVD-U02
DVD-ROM DRIVE UNIT
UNITE DE LECTEUR DE DVD-ROM
DVD-ROM –LAUFWERK
LETTORE DI DVD-ROM
English
Français
Deutsch
Thank you for buying this PIONEER product. Please read
through these operating instructions so you will know
how to operate your unit properly. After you have fin-
ished reading the instructions, put them away in a safe
place for future reference. Italiano
WARNING: TO PREVE
ページ2に含まれる内容の要旨
This product complies with the EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking Directive (93/68/EEC). Ce produit est conforme aux directives relatives à la compatibilité électromagnétique (89/336/CEE, 92/31/CEE) et à la directive CE relative aux marquages (93/68/CEE). Dieses Produkt entspricht den EMV-Richtlinien (89/336/EEC, 92/31/EEC) und CE- Markierungsrichtlinien (93/68/EEC). Questo prodotto è conforme alle direttive EMC (89/336/CEE, 92/31/CEE) e alla direttiva sul marchio CE (93/68/CE
ページ3に含まれる内容の要旨
SAFETY INSTRUCTIONS To ensure your personal safety and to maximize the full operating potential of your Drive, read and follow these safety precautions: ENVIRONMENT - Please do not use the unit at places with much dust, high temperature, or high humidity. Please use the unit at a place where it is not subjected to vibrations or shocks. POWER - Power-off your system and attached hardware devices before installation. READ INSTRUCTIONS - Read all safety and operating instructions before the Drive
ページ4に含まれる内容の要旨
SAFETY INSTRUCTIONS RADIO SIGNAL INTERFERENCE - This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. How
ページ5に含まれる内容の要旨
SAFETY INSTRUCTIONS DO NOT use damaged,cracked, or warped discs. If they break inside the unit, they may damage the optics. Discs rotate at high speed in- side the changing mechanism. DO NOT use non-standard discs, as these may adversely influence this unit and other equipment. DO NOT play a CD having other shape than a circular disc, such as heart shaped disc. Other wise malfunction may occur. The enclosed device driver is for use with MS-DOS/Windows 3.XX. This driver is not required for use wi
ページ6に含まれる内容の要旨
FEATURES Ö High-speed reading Transfer rate (sustained): maximum 3,300 kBytes/sec. (DVD-ROM) maximum 3,000 kBytes/sec. (CD-ROM) NOTE: The data transfer rate may not be output for some disc conditions (scratches, etc.). Ö High-speed access (Random average): 150 ms (DVD-ROM) 90 ms (CD-ROM) Ö SCSI-2 interface specifications Ö Buffer size: 512 kBytes Ö Applicable discs DVD-ROM (DVD-5, DVD-9) DVD-V, DVD-A (Data stream transfer) DVD-R CD-ROM Mode 1 CD-ROM XA Mode 2 (Form 1, 2) CD-DA CD-R, CD Extra, Vi
ページ7に含まれる内容の要旨
A HARDWARE TOUR Illustrations are provided in this chapter as a visual introduction to the Drive. Please Familiarize yourself with these illustrations and refer to them when necessary to complete the installation and operation of the unit. FRONT VIEW DVD-ROM DRIVE 7 1 PHONES BUSY DVD 5 4 3 2 6 Fig. 1 1 Disc loading slot Insert the DVD-ROM or CD-ROM with the label facing up. When using 8 cm (3.15-inch) discs, attach a CD adapter (available at stores) to the disc, and insert the disc into the dis
ページ8に含まれる内容の要旨
A HARDWARE TOUR REAR VIEW 49 1 DC INPUT 41 8 1 50 2 +5 G G +12 89 0 - Fig. 2 8 Audio output This is a connector for output of analog audio. As a Molex 70553 type connecter is used, select a matching connection cable. 9 Function switch Use the accessory short-circuit sockets to set the SCSI ID number and the drive function. Ö ON : short circuited Ö OFF : open * The factory setting is for ID No. 2. #1 ~ 3 : SCSI ID SCSI-ID Setting switch 0 1 2* 345 67 0 (LSB) (#1) OFF ON OFF ON OFF ON OFF ON
ページ9に含まれる内容の要旨
DVD-ROM DRIVE PHONES DVD BUSY TO INSTALL THE DRIVE Fig. 3 Ö Switch off the power of the personal computer and remove the cover or the front panel. Ö Remove the blank panel installed at the front of the 5.25 inch slot. Installation is not possible when there is no empty slot. Ö Install the fixation slide rails on the drive. (If slide rails are required, contact the shop where you bought the computer or the computer manufacturer.) Ö Insert the drive into the slot. Ö If fixing is required, fix the
ページ10に含まれる内容の要旨
CONNECTING THE DRIVE IN THE MIDDLE OF A SCSI CHAIN Sound Board DVD-U02 Audio Cable SCSI HOST Pin 1 Adapter Pin 1 SCSI hard disk SCSI Interface Cable Into an expansion slot of the personal computer To the power supply of the personal computer Fig. 4 When a SCSI hard disk or other SCSI equipment also is installed in the computer, please connect according to the following method. ¦ Switch off the power supply of the personal computer. ¦ Set the SCSI ID number so that it is different fr
ページ11に含まれる内容の要旨
CONNECTING THE DRIVE AS THE ONLY SCSI DEVICE Sound Board Audio Cable SCSI HOST Pin 1 Adapter Power Cable SCSI Interface To the power supply of Cable the personal computer Into an expansion slot of the personal computer Fig. 5 When no SCSI hard disk or other SCSI equipment is used, connect according to the following connection method. ¦ Switch off the power supply of the personal computer. ¦ Set the SCSI ID number. ¦ Set the termination ON. ¦ Connect the power supply cable from the p
ページ12に含まれる内容の要旨
DISC OPERATION DISC SETTING METHOD ¦ Insert the disc into the disc loading slot with the label facing up. Fig. 6 ¦ When using 8 cm/3.15-inch discs, attach a CD adapter (available at stores) to the disc, and insert the disc into the disc loading slot. 8 cm disc CD adapter Fig. 7 Do not insert 8 cm/3.15-inch discs by themselves. Use 8 cm/3.15-inch disc adapters labeled with the ' mark (recommended standard product). Do not use adapters which cause the disc to idle, nor adapters which are bent or
ページ13に含まれる内容の要旨
DISC OPERATION DISC REMOVAL METHOD ¦ Confirm that the BUSY indicator of the drive is not lit, and then press the Eject button (0). ¦ Remove the disc after it has been ejected. FORCED EJECTION METHOD IN CASE OF EMERGENCY In the following cases, the disc can be removed using the forced ejection hole. ¦ In case of drive trouble, when the disc can not be ejected with the Eject button or by a software command. ¦ When the disc is to be removed while the power is switched off. Confirm that the power su
ページ14に含まれる内容の要旨
TROUBLESHOOTING Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this unit, check the points below according to the symptom. If your computer did not start up correctly because the initial diagnostics did not recognize a SCSI device, check these items: ¦ Were all of your SCSI devices plugged in and turned on before you started your computer ? — The Drive and all of the SCSI devices in the daisy chain must be turned on before yo
ページ15に含まれる内容の要旨
SPECIFICATIONS [General functions] Disc diameter 12 cm ( 4.72 in ), 8 cm (3.15 in )* * When using 8 cm discs, attach a CD adapter (available at stores) to the disc. Transfer rate (Sustained) DVD-ROM maximum 3,300 kBytes/sec. CD-ROM maximum 3,000 kBytes/sec* * The data transfer rate may not be output for some disc conditions (scratches, etc.). Access time (Random average) DVD-ROM 150 ms CD-ROM 90 ms Data buffer capacity 512 kBytes [Audio output part] Line 0.7 Vrms ± 0.5 Vrms (at 10 kΩ load
ページ16に含まれる内容の要旨
INSTRUCTIONS DE SECURITE Pour garantir votre sécurité personnelle et obtenir le maximum de votre lecteur, lire et suivre ces consignes de sécurité: ENVIRONNEMENT - Ne pas utiliser cet appareil dans des endroits avec beaucoup de poussière, une température ou une humidité élevée. Utiliser l’appareil à un endroit où il n’est pas soumis à des vibrations ou des chocs. PUISSANCE - Couper l’alimentation du système et des dispositifs joints avant l’installation. LIRE LES INSTRUCTIONS - Lire toutes les i
ページ17に含まれる内容の要旨
INSTRUCTIONS DE SECURITE La production de bruits acoustiques est inférieure à 70 dB. (ISO7779/DIN45635) L’étiquette d’avertissement suivante ATTENTION apparaît sur votre appareil. Ce produit renferme une diode à laser d’une catégorie supérieure à 1. Pour garantir une Emplacement: sur le dessus du de sécurité constante, ne pas retirer les couvercles couvercle ni essayer d’accéder à l’intérieur de l’appareil. Pour toute réparation, s’adresser à un personnel qualifié. CLASS 1 LASER PRODUCT LASER K
ページ18に含まれる内容の要旨
CARACTERISTIQUES PRINCIPALES Ö Lecture à haute vitesse Vitesse de transfert (continue): maximum 3.300 KO/sec. (DVD-ROM) maximum 3.000 KO/sec. (CD-ROM) REMARQUE : Il se peut que le taux de transfert de données ne soit pas affiché à cause de l’état du disque (rayures, etc.). Ö Accès à haute vitesse (Moyenne aléatoire): 150 ms (DVD-ROM) 90 ms (CD-ROM) Ö Spécifications d’interface SCSI-2 Ö Tampon de données: 512 koctets Ö Disques utilisables Disque optique DVD-ROM (DVD-5, DVD-9) DVD-V, DVD-A (Flux
ページ19に含まれる内容の要旨
TOUR DU MATERIEL Des illustrations sont fournies dans ce chapitre comme introduction visuelle au lecteur. Nous vous prions de vous familiariser avec ces illustrations et de vous y reporter en cas de nécessité pour compléter l’installation et l’opération de l’appareil. VUE AVANT DVD-ROM DRIVE 7 1 PHONES BUSY DVD 5 4 3 2 6 Fig. 1 1 Chargeur de disque Insérez le DVD-/CD-ROM l’étiquette vers le haut. En utilisant des disques de 8 cm, montez un adaptateur CD (disponible dans le commerce) sur le disq
ページ20に含まれる内容の要旨
TOUR DU MATERIEL VUE DE LA FACE ARRIERE 49 1 DC INPUT 41 8 1 50 2 +5 G G +12 89 0 - Fig. 2 8 Sortie audio Connecteur de sortie du signal audio analogique. Du fait qu’un Molex 70553 est utilisé, sélectionner un câble de raccordement correspondant. 9 Commutateur de fonction Utiliser les cavaliers accessoires pour régler le numéro d’identification SCSI et la fonction de lecteur. Ö ON : court-circuité Ö OFF : ouvert * Le réglage d’usine est ID 2. #1 ~ 3 : SCSI ID Commutateur SCSI-ID de réglage
