Human Touch HT-2620/iJOY-300の取扱説明書

ページ1に含まれる内容の要旨

January 03, 2011

REPLACING THE POWER PANEL
HT-2620/iJOY-300
®
It is imperative that Human Touch products are repaired in a manner that ensures product safety and regulatory compliance and that is fully consistent with the practices used
during the manufacturing process. Therefore, Human Touch requires that all product repairs are performed using only factory-new parts and in accordance with these repair SERVICE LEVEL: 2
instructions. Failure to adhere to these instructions voids the product w

ページ2に含まれる内容の要旨

INSTALLING THE NEW POWER PANEL 1. Holding the new power panel next to the chair base, connect the two sets of power panel connectors to the corresponding connectors on the chair base. 2. Using a flat-head screwdriver and screw, attach the green grounding wire to the chair using the threaded screw hole as shown. 3. Position the power panel firmly into place, then secure it using the four screws. 4. Tip the chair gently back to an upright position. 5. Plug in the chair and power it on. 6. Ve