ページ1に含まれる内容の要旨
Introduction
2
Connections
DIGITAL VIDEO
16
DVD VIDEO PLAYER & VIDEO
Basic setup
25
CASSETTE RECORDER
Playback
32
(VCR)
SD-V593SU
Recording
37
(VCR)
OWNER’S MANUAL
Other functions
42
(VCR)
Basic playback
45
(DVD)
Advanced
48
playback
(DVD)
Function setup
58
(DVD)
Others
65
©2005 Toshiba Corporation
This device does not tape-record copy protected DVD Video Discs.
2F90201A (E) COV 1 4/4/05, 9:01 PM
ページ2に含まれる内容の要旨
Introduction SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an CAUTION equilateral triangle is intended to alert the user to the presence RISK OF ELECTRIC SHOCK of uninsulated dangerous voltage within the product's DO NOT OPEN enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (
ページ3に含まれる内容の要旨
Introduction IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. 5. CLEANING Unplug this unit from the wall outlet before cleaning. Do not use liq
ページ4に含まれる内容の要旨
Introduction IMPORTANT SAFEGUARDS 13. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. 14. POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall onto or against such
ページ5に含まれる内容の要旨
Introduction IMPORTANT SAFEGUARDS / Power source 19. REPLACEMENT PARTS When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 20. SAFETY CHECK Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in prop
ページ6に含まれる内容の要旨
Wait! ! e r n u t o s i i o t m a s f Introduction Precautions Notes on handling Notes on moisture condensation When shipping the DVD/VCR, the original shipping Moisture condensation damages the DVD/VCR. carton and packing materials come in handy. For Please read the following carefully. maximum protection, repack the unit as it was Moisture condensation occurs, for example, when you originally packed at the factory. pour a cold drink into a glass on a warm day. Drops of Do not use volatile liqu
ページ7に含まれる内容の要旨
Introduction Contents Introduction Basic playback (DVD) SAFETY PRECAUTIONS ................................2 Playing a disc ................................................. 45 IMPORTANT SAFEGUARDS .......................... 3 Power source ...................................................5 Advanced playback (DVD) Precautions ......................................................6 Zooming ......................................................... 48 Contents. ....................................
ページ8に含まれる内容の要旨
Introduction Notes and Information On handling discs Structure of disc contents Do not touch the playback side of the disc. Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs and audio CDs are divided into tracks. DVD video disc DVD video disc Title 1 Title 2 Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3 Playback side Do not attach paper or tape to discs. Video CD/Audio CD Video CD/Audio CD Track 1 Track 2 Track 3 Track 4 Track 5 On cle
ページ9に含まれる内容の要旨
Introduction About this owner’s manual Notes on copyright This owner’s manual explains the basic instructions of The unauthorized recording, use, distribution, or revision this DVD/VCR. Some DVD video discs are produced in of television programs, videotapes, DVDs and other a manner that allows specific or limited operation during materials, is prohibited under the Copyright Laws of the playback. As such, the DVD/VCR may not respond to all United States and other countries, and may subject you op
ページ10に含まれる内容の要旨
Introduction Notes and Information (continued) Playable discs This DVD/VCR can play the following discs. Because of problems and errors that can occur during the creation of DVD and Video CD software Disc Maximum and/or the manufacture of DVD and Video CD discs, Disc Mark Contents Size playback time Toshiba cannot guarantee that this DVD/VCR will play every feature of every DVD bearing the DVD Approx. 4 hours logo and/or every Video CD bearing the CD logo. (single sided disc) As one of the creat
ページ11に含まれる内容の要旨
Introduction Playable Media cards Notes on Media cards This unit can play the following cards. • Ensure that you insert the Media card correctly into the media card slot. Playable • Never remove the Media card or turn off the unit while using Card Mark Contents card the Media card. Doing so may result in loss of data or dam- capacity age to the Media card or the unit. SUCH DAMAGE IS NOT TM COVERED BY YOUR TOSHIBA WARRANTY. SD (Secure Digital ) 32 MB – • It is recommended that you back up your Me
ページ12に含まれる内容の要旨
Introduction Identification of controls See the page in for details. OPEN/CLOSE button Front panel FF button REV button PLAY button Cassette loading slot DVD indicator STOP button ON/STANDBY button Disc tray REC button Remote sensor VCR/DVD mode selector Media card slot VCR indicator EJECT button SD memory card button CHANNEL / buttons MMC (MultiMediaCard) Media card slot xD-Picture Card Display window AUDIO (L/R)/VIDEO IN [CompactFlash
ページ13に含まれる内容の要旨
Introduction Display window Play indicator VCR indicator (VCR) Still indicator Disc inserted indicator (DVD) Recording Disc inserted indicator (CD) indicator (VCR) AM/PM indicator (AM is not displayed) Track indicator (CD) Multifunctional indicator Progressive indicator Tape loaded indicator (VCR) Timer Recording indicator (VCR) VCR operation status Press CALL to display VCR operation status on the screen. To cancel the display, press CALL again. VCR Icons While watching TV While operating a tap
ページ14に含まれる内容の要旨
Introduction Identification of controls (continued) The instructions in this manual describe the functions on the remote control. See the page in for details. Remote control DVD/VCR button 25 25 * POWER button CABLE BOX button 67 * TV button 66 * CALL button 13 DISPLAY button 13 Direct channel selection buttons (0–9) 31 * CH / button 66 Number buttons (0–9) 48 ZERO RETURN button 35 SEARCH button 48 66 * 100 button 66 * VOL +/– buttons CM SKIP button 34 43 ZOOM button * INPUT SELECT b
ページ15に含まれる内容の要旨
Introduction Inserting batteries Open the battery compart- Install two “AAA” batteries Replace the compartment ment cover in the direction of (supplied), paying attention to the cover. 1 23 the arrow. polarity diagram in the battery compartment. Caution: Never throw batteries into a fire. Notes: • Be sure to use AAA size batteries. • Dispose of batteries in a designated disposal area. • Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance
ページ16に含まれる内容の要旨
Connections Antenna connections If you are using an antenna system, follow these instructions. If you are a Cable TV subscriber, skip ahead to page 16 for the proper connections. Antenna to DVD/VCR connection The DVD/VCR must be connected “between” the antenna and the TV. First, disconnect the antenna from the TV and connect it to the DVD/VCR. Then connect the DVD/VCR to the TV. Below are 3 common methods of connecting an antenna system to a DVD/VCR. Find the type of antenna system you are using
ページ17に含まれる内容の要旨
Connections DVD/VCR to TV connection After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV. Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow the connection diagram. This DVD/VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna inputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for VHF and UHF reception. TV Note: If a VHF or U
ページ18に含まれる内容の要旨
Connections Cable TV connections Many cable companies offer services permitting reception of extra channels including pay or subscription channels. This DVD/VCR has an extended tuning range and can be tuned to most cable channels without using a cable company supplied converter box, except for those premium channels which are intentionally scrambled. If you subscribe to a premium channel which is scrambled, you must have a descrambler box for proper reception. DVD/VCR 1 TV IN (ANT) VHF/UHF Incom
ページ19に含まれる内容の要旨
Connections IMPORTANT: Make sure the TV/CABLE menu option is set to the “CABLE” mode. This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scram- bled programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Con- sult your local cable company for more information concerning connection to their descrambler equipment. There are many ways to connect your DVD/VCR to a cable system. Below are six com
ページ20に含まれる内容の要旨
Connections Connecting to a TV Connect the DVD/VCR to your TV. Note: This method transports VHS and DVD-video signals. For enhanced DVD-video performance, we recommend you ® also connect the S-video, ColorStream component video or HDMI outputs to your TV/monitor. Connecting to a TV Signal flow (yellow) (red) (white) To wall outlet To ANALOG AUDIO OUT To VIDEO Audio/video cable (supplied) OUT To audio inputs To video input (red) (white) (yellow) TV or monitor with audio/video inputs •
