ページ1に含まれる内容の要旨
Introduction
2
Various settings
DIGITAL VIDEO
24
Disc playback
34
Hi-Fi VCR & DVD VIDEO RECORDER
Tape playback
49
D-VR5SU Recording
53
OWNER’S MANUAL
Editing the disc
63
Dubbing
78
Additional information
82
©2006 Toshiba Corporation
This device does not tape-record copy protected DVD Video Discs.
2J40101A Cover 1 3/4/06, 10:42 AM
ページ2に含まれる内容の要旨
Introduction SAFTY PRECAUTIONS The lightning flash with arrowhead symbol, within an CAUTION equilateral triangle is intended to alert the user to the RISK OF ELECTRIC SHOCK presence of uninsulated dangerous voltage within the DO NOT OPEN product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER The exclamation point within an equilateral triangle is (OR BACK). NO USER-SERVICEABLE P
ページ3に含まれる内容の要旨
Introduction IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. 5. CLEANING Unplug this unit from the wall outlet before cleaning. Do not use liq
ページ4に含まれる内容の要旨
Introduction IMPORTANT SAFEGUARDS 13. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. 14. POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall onto or against such
ページ5に含まれる内容の要旨
Introduction IMPORTANT SAFEGUARDS 19. REPLACEMENT PARTS When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 20. SAFETY CHECK Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating co
ページ6に含まれる内容の要旨
Introduction Contents Introduction Setting the screen ............................................ 30 • TV SCREEN .................................................... 30 SAFTY PRECAUTIONS ...................................... 2 STILL MODE ................................................... 30 • IMPORTANT SAFEGUARDS .............................. 3 LINE1 INPUT/LINE2 INPUT ............................ 30 • Contents ............................................................. 6 Setting the im
ページ7に含まれる内容の要旨
Introduction Contents Editing an original title .................................... 70 Tape playback • Adding a chapter mark .................................... 70 Loading and unloading a cassette tape......... 49 Combining chapters ......................................... 71 • Cassette tape playback ................................... 50 Changing an original title name ....................... 72 • Special playback .............................................. 51 Erasing a scene (Edit ti
ページ8に含まれる内容の要旨
Introduction Features Recording function Not only can you playback and record video tapes, but Timer recording you can also playback DVD discs or make recordings using DVD-RAM, DVD-RW or DVD-R discs with this unit. The timer recording system allows you to select the In addition, you can enjoy editing the programs you date, time and channel and record the desired programs. record. Up to 12 timer programs within a month can be stored Playback function in this unit. A realistic, powerful, Movie The
ページ9に含まれる内容の要旨
Introduction Disc Handling discs Removing the Disc from its case Region management information Be sure to hold the disc by its edges. This unit is designed and manufactured to support the Do not touch the surface of the disc. region management information that is recorded on a Take the disc carefully from its case. DVD disc. If the region number written on the DVD disc • Do not scratch the disc. does not correspond to the region number of this unit, • Do not get dirt on the surface of the disc.
ページ10に含まれる内容の要旨
Introduction Disc DVD-R Discs on which video can be •You can record on the disc only in the Video mode. recorded •You can record until the disc becomes full. To record video with this unit, use the discs below: • Finalizing the discs allows playback on other DVD players. However, the finalized discs can no longer Media type Logo mark be recorded. DVD-RAM Ver.2.0 Ver.2.1 • Discs can be recorded to repeatedly until they are finalized. DVD-RW Ver.1.0, Ver.1.1, Ver.1.2 Ver.1.1 CPRM support NOTES: Ve
ページ11に含まれる内容の要旨
Introduction Disc Title/Chapter/Track When recording in the Video mode A DVD-Video has large partitions called “Titles”, and When a disc recorded in the Video mode is finalized, it smaller partitions within them called “Chapters”. cannot be recorded onto any more. Therefore, before A music CD has other partitions called “Tracks”. A num- finalization, be sure to perform all desired recording. ber is allotted to each partition and these numbers are After finalization, a title list that can be used
ページ12に含まれる内容の要旨
Introduction Parts and functions Front * This unit has a door on the front panel. Please open it to access the S-VIDEO jack and the AUDIO (L/R)/VIDEO IN (INPUT 2) jacks. Display window VCR/DVD button OPEN/CLOSE button PLAY button VCR indicator Disc tray STOP button ON/STANDBY button Cassette Loading Slot DVD indicator EJECT button DV IN terminal REW (Rewind) button S-VIDEO IN (INPUT 2) jack FWD (Fast Forward) button AUDIO (L/R) IN Remote senser REC button (INPUT 2) jacks CHANNEL / buttons VIDEO
ページ13に含まれる内容の要旨
Introduction Parts and functions Display window 2 4 P 1 3 No. Display Description 1 Lights during video tape playback. Video tape is temporarily stopped. Lights during video tape recording. P Progressive scanning mode. Timer recording display. XP/SP/LP/SLP 4 DVD recording modes. XP, SP, LP or SLP can be selected in turn by pressing the REC MODE/SPEED repeatedly. SP/SLP 2 VCR recording modes. SP or SLP can be selected in turn by pressing the REC MODE/SPEED repeatedly. 2 CD Appears when a CD is in
ページ14に含まれる内容の要旨
Introduction Parts and functions Page Remote control OPEN/CLOSE Opens or Closes the tray. 34 EJECT Ejects the cassette tapes 49 PROG Activates the progressive scanning mode. 21 HDMI HDMI output on/off. 21 TV/VIDEO Select to operate TV/VIDEO 23, 56 ON/STANDBY Turns power on/off. 23 0-9 Direct channel selection of TV 55 Setting input 38, 76 Entering a password 26 INSTANT REPLAY Repeats playback between the section played 10 seconds before and present section. 39 INSTANT SKIP Skips commercial break
ページ15に含まれる内容の要旨
Introduction Parts and functions Inserting Batteries into the Remote Control: Open the battery compartment Install two “AAA” batteries, pay- Replace the compartment cover. 1 2 3 cover in the direction of the ar- ing attention to the polarity dia- row. gram in the battery compart- ment. Caution: Never throw batteries into a fire. Notes: • Be sure to use AAA size batteries. • Dispose of batteries in a designated disposal area. • Batteries should always be disposed of with the environment in mind.
ページ16に含まれる内容の要旨
Introduction Antenna connections If you are using an antenna system, follow these instructions. If you are using a Cable TV subscriber, skip ahead to page 18 for the proper connections. ANTENNA TO DVD/VCR CONNECTION The DVD/VCR must be connected “between” the antenna and the TV. First, disconnect the antenna from the TV and connect it to the DVD/VCR. Then connect the DVD/VCR to the TV. Below are 3 common methods of connect- ing an antenna system to a DVD/VCR. Find the type of antenna system you
ページ17に含まれる内容の要旨
Introduction Antenna connections DVD/VCR TO TV CONNECTION After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV. Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow the connection diagram. This DVD/VCR has a single 75 ohm output for connection to a TV. If your TV has separate UHF and VHF antenna inputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for UHF and VHF reception. T
ページ18に含まれる内容の要旨
Introduction Cable TV connections Many cable companies offer services permitting reception of extra channels including pay or subscription chan- nels. This DVD/VCR has an extended tuning range and can be tuned to most cable channels without using a cable company supplied converter box, except for those channels which are intentionally scrambled. If you subscribe to a special channel which is scrambled, you must have a descrambler box for proper reception. 1
ページ19に含まれる内容の要旨
Introduction Cable TV connections IMPORTANT: Make sure the TV/CABLE menu option is set to the “CABLE” mode. This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scrambled programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Consult your local cable company for more information concerning connection to their descrambler equipment. There are many ways to connect your DVD/VCR to a cable system.
ページ20に含まれる内容の要旨
Introduction Connections with the TV or audio component The exact arrangement you use to interconnect various video The unauthorized recording, use, distribution, and audio components to the DVD/VCR is dependent on the or revision of television programs, videotapes, model and features of each component. Check the Owner’s DVDs and other materials, is prohibited under Manual provided with each component for the location of video the Copyright Laws of the United States and and audio inputs and outp