ページ1に含まれる内容の要旨
DIGITAL VOICE RECORDER
JWIN JX-R86 USER MANUAL
ページ2に含まれる内容の要旨
TABLE OF CONTENTS 1. Warnings and instructions 2. Descriptions of the user interface and indications on LCD 3. How to install batteries 4. How to use recording function 5. How to change recording quality (SP, LP) 6. How to change recording sensitivity 7. How to set voice-operated recording (VOR) function 8. How to switch directory to directory 9. How to play a recorded message 10. How to record with other devices (CD / Cassette players) 11. How to record your conversation from a
ページ3に含まれる内容の要旨
2. DESCRIPTIONS OF USER INTERFACE AND INDICATIONS ON LCD INDICATIONS ON LCD a. Volume indication b. Key-lock indication c. Low battery indication d. Alarm indication e. Voice-operated recording (VOR) indication f. Displaying numbers and symbols g. Pause indication h. Recording indication i. Play indication j. Recording quality indication k. Directory indication USER INTERFACE OF JX-R86 a. Ext. MIC jack b. Built-in MIC c. LED indicator for recording d. LCD display e. PLAY
ページ4に含まれる内容の要旨
Note: Old batteries or weakened batteries may cause quality failure in recording. 4. HOW TO USE RECORDING FUNCTION a. Press and hold the REC/STOP key for about 2 seconds to enter the recording mode. You will see the record indication on the LCD display. b. Press the PLAY/OK key to pause recording while in the recording process. c. Press the PLAY/OK key again if wish to continue recording while in the pause mode. d. Press the REC/STOP key to stop recording. Note: The total nu
ページ5に含まれる内容の要旨
c. Press the PLAY/OK key to enter the “rEC SENSE” setup page. d. Use the VOL + or VOL – key to select one of the options, “1” through “5”. e. Press the PLAY/OK key to confirm your choice on the recording sensitivity. f. Press the REC/STOP key to exit the setup mode completely. Note: The higher number indicates higher sensitivity. With the higher sensitivity setting, the voice-operated recording function (VOR) will respond to the voices or noises more sensitively. 7. HOW TO SET T
ページ6に含まれる内容の要旨
Note: The directories are used to separate recorded files. For example, if you record a message in the directory “b”, that particular message can only be reproduced from directory “b”. 9. HOW TO PLAY PREVIOUSLY RECORDED MESSAGE a. Turn on the recorder. b. Switch to the directory which contains a recorded message you want to play. c. Use the VOL + or VOL – key to select the message. The file number and recording time for each message will be displayed on LCD while browsing the mes
ページ7に含まれる内容の要旨
b. Connect the telephone connector to the telephone line jack on the wall. c. Connect one end of the line cable, which is included with the recorder, to the jack on the back of the telephone connector. d. Connect the other end of the line cable to the MIC jack on the recorder. e. Press the REC/STOP button to start recording. Once all the connections are set it will record the conversation from phone call either is an incoming or outgoing call. f. Press the REC/STOP button to stop recordin
ページ8に含まれる内容の要旨
you can still find the message numbered as 3 in the directory. However, the message is not the one which you just deleted. It is the one which was numbered as 4 previously. In other words, it will reduce all the message numbers by 1 after the deleted one. 14. HOW TO DELETE ALL THE RECORDED MESSAGES a. Press and hold the PLAY/OK key for about 2 seconds to enter the setup mode. b. Use the VOL + or VOL – key to locate the “dEL ALL” menu. c. Press the PLAY/OK key to enter the “dEL AL
ページ9に含まれる内容の要旨
d. Use the VOL + or VOL – key to change the year. e. Press the PLAY/OK key to confirm the chosen year. After pressing the key, the next position for month will be flickering automatically. f. Use the VOL + or VOL – key to change the month. g. Press the PLAY/OK key to confirm the chosen month. After pressing the key, the next position for the day will be flickering automatically. h. Repeat the steps above until you set the minute. After you press the PLAY/OK key to confirm the chosen minut
ページ10に含まれる内容の要旨
When the alarm function is activated, the recorder will ring for 80 seconds. To end the alarm sound, press any key. 17. HOW TO SET THE TIME-RECORDING FUNCTION a. Press and hold the PLAY/OK key for about 2 seconds to enter the setup mode. b. Use the VOL + or VOL – key to locate the “SEL t-r” menu. c. Press the PLAY/OK key to enter the “SEL t-r” setup page. You will see the blinking position and steady number positions on the LCD display. The positions are in order of Hour-Minute resp
ページ11に含まれる内容の要旨
c. Press the REP key to repeat the interval from the end of the last repeating interval to the new point at which you press the REP key again. d. Press the REC/STOP key to stop replaying the message. 19. HOW TO USE THE BOOKMARK FUNCTION a. Under the stop or standby mode, press the FOL key to continue to play a recorded message from the end of the last repeating interval. (It will only work if you tried the repeating function at least once before using this function.) b. Press the
ページ12に含まれる内容の要旨
LCD display. In the recording or playing mode, it will only show the indication on the LCD display. c. When there is no memory space left while recording, it will stop recording automatically. Once it reaches its maximum of the memory capacity, it will show the “NO SPACE” indication and make a warning sound when you try to record. 22. SPECIFICATION OF DVR SP mode 45 minutes Recording Time LP mode 230 minutes Unit Dimension 26 (W) x 126 (L) x 16 (T) mm Unit Weight About 33 grams (
