ページ1に含まれる内容の要旨
Digital Multiplex Recorder
USER’S MANUAL
Please read the instructions thoroughly before operation and retain it for future reference.
777 W V1.0
ページ2に含まれる内容の要旨
WARNING All the safety and operating instructions should be read before operation. The improper operation may cause permanent damage. • Please use the provided adaptor (Other adaptor is not suitable for this machine). • Please lift and place this equipment gently. • Do not expose this equipment to open sunlight. • Do not use this equipment near water or in contact with water. • Do not spill liquid of any kind on the equipment. • Please power down the unit before unplugging. • Do not switch the
ページ3に含まれる内容の要旨
TABLE OF CONTENTS What Do You Get ? What Do You Get ? • FEATURES -------------------------------------------------------------------------------------- 1 • PACKAGE INCLUDING ---------------------------------------------------------------------- 1 B Bef efo or re e O Op pe er ra at tiion on • INSTALLATION GUIDE ---------------------------------------------------------------------- 2 • FRONT PANEL ---------------------------------------------------------------------------------- 3 5 • BACK PANEL
ページ4に含まれる内容の要旨
TABLE OF CONTENTS Advanced Operation Advanced Operation • OPERATION OPTIONS ----------------------------------------------------------------------- 43 • KEY LOCK ---------------------------------------------------------------------------------------- 44 • TROUBLE SHOOTING-------------------------------------------------------------------------- 44 • SPECIFICATIONS ------------------------------------------------------------------------------- 45 Appendix Appendix • APPENDIX #1 – INSTALL HDD-----
ページ5に含まれる内容の要旨
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
FRONT PANEL 1 3 5 7 9 11 13 15 Up 2 4 6 8 10 12 14 16 Left Right M ENU ENTER ZOOM SLOW REC POWER HDD HDD ALARM TIMER PLAY REC Full Down SELECT 1. REMOVABLE HDD CARTRIDGE Please refer to page.46 Appendix #1. 2. MENU Press MENU button to enter main menu. 3. ENTER Press ENTER button for confirmation. 4. ZOOM Press ZOOM button to enlarge the picture display. 5. Press PIP button for Picture in Picture screen. 6. SLOW To slow down speed of play mode. 7. SELECT Press SELECT button to select appointed c
ページ8に含まれる内容の要旨
9. 7, 9, 10, 13 channels display mode 10. 16 channels display mode 11. LED LIGHT The LED Light is ON under the following conditions. •HDD : HDD is activated •HDD Full : HDD is full •ALARM : If you want to turn off the ALARM LED light, please refer to page.13 and set the Camera / ALARM item as OFF. (all of the cameras should be set as OFF.) •TIMER : When Timer is set as Enabled •PLAY : On Play mode •REC : On Recording mode 12. CAMERA (1-16) Press the Camera Select (1-16) to select specifie
ページ9に含まれる内容の要旨
BACK PANEL 8 6 7 5 4 3 1 2 10 9 1. POWER Please use the provided adaptor to connect power cord (Other adaptors are not suitable for this machine). 2. EXTERNAL I/O •Controlled remotely by an external device or control system. •Alarm input, external I / O explanation. 3. 75Ω / HI When using Loop function, please switch to HI. If you don’t use Loop function or disconnect the video input, please set it as 75Ω. 4. VIDEO INPUT (1-16) Connect to video source, such as camera. 5. LOOP (1-16) Connect vi
ページ10に含まれる内容の要旨
Basic Operation START THIS UNIT Before using the DMR, please have the HDDs installed ready. (refer to Appendix #1 for installation or removal of HDDs). 1. Connect the AC Power Cord with Power Adapter and plug into an electrical outlet. The Red LED indicator light will be ON and the DMR is in Standby mode. 2. Press the Power button. The POWER LED will turn from red to orange, and other red LED indicators will turn ON. It takes approximately 5 to 15 seconds to boot the system with the message :
ページ11に含まれる内容の要旨
PLAY Press “ PLAY ” button, the DMR will show the last recording. 1. FAST FORWARD (F.F. ) & FAST REWIND (F.R.) You can increase speed for Fast Forward and Rewind on the DMR. In the Play mode, press ”►► ” once to get 2X speed forward and press twice to get 4X speed,… and the maximum speed can reach 32X. Press ”◄◄ ” once to get 1X speed rewind and press twice to get 2X speed, … and the maximum speed can reach 32X. 2. SLOW FORWARD (S.F.) & SLOW REWIND (S.R.) You can also slow down the speeds of
ページ12に含まれる内容の要旨
Detailed Menu Setup MENU MENU NETWORK SEARCH TIMER RECORD CAMERA SYSTEM EVENT LAST RECORD DAY HDD OVERWRITE TITLE AUDIO INPUT SEVER IP FULL LIST START RECORD IPS DWELL INT AUDIBLE ALARM GATEWAY ALARM LIST END RECORD QUALITY Brightness / Contrast / Color EXT AUDIBLE ALARM NET MASK MOTION LIST QUALITY ALARM REC IPS ALARM MOTION AUDIBLE ALARM DNS TIME SEARCH IPS ALARM REC QUALITY RECORD ALARM DURATION WEB PORT TIMER ENABLE MOTION TRIGGER RECORD DWELL TIME RESET DEFAULT MESSAGE LATCH TITLE DISPLAY
ページ13に含まれる内容の要旨
ACCESS MENU The Menu allows you to configure your DMR settings. Please follow the steps below to access the Menu : Password: 0000 Press the Menu button. The password screen will appear: The default Password is 0000. Press the Enter button to access the Menu. NOTE : To key-in the Password, press the “Right” and “Left” buttons to move between numbers, and use the “Up” and “Down” buttons to input the number. Press the ENTER button once the correct Password is entered. The MENU options screen will
ページ14に含まれる内容の要旨
MENU OPTIONS SYSTEM 1. AUDIO INPUT (MENU) To choose one of 4 channels to record. (can only select 1 during operation for recording) SEARCH TIMER 2. INT AUDIBLE ALARM RECORD To set the INTERNAL AUDIBLE ALARM. It will be trigged by event occurrence when CAMERA the setting is ON. ►SYSTEM EVENT 3. EXT AUDIBLE ALARM NETWORK To set the EXTERNAL AUDIBLE ALARM. It will be trigged by event occurrence when the setting is ON. 4. MOTION AUDIBLE ALARM To set the MOTION AUDIBLE ALARM. It will be trigged
ページ15に含まれる内容の要旨
11. NEW PASSWORD : XXXX (Default password : 0000) To set the new password. 12. CLEAR HDD Delete all the contents of your HDD. When you choose “YES” on this option, you will be prompted with the question shown : Press “►” to clear HDD or press ”◄” not to clear HDD. ALL DATA IN HDD WILL BE CLEARED 13. SYSTEM RESET ARE YOU SURE? Reset the system to book to the factory default settings. (◄ : NO ► : YES ) SEARCH Press ”ENTER” to confirm SEARCH setup, and the screen will show the following (MENU) opt
ページ16に含まれる内容の要旨
TIMER 1. DAY Select the day, or days of the week (Mon–Fri / Sat-Sun / Daily) that you wish to schedule the DMR to auto recording. NOTE : 1.Special Date could be changed by “Enter”, “Up” and “Down” buttons. 2. If you have selected the specific date and recording timer set from that specific day to a new day, then the Recording Timer Schedule will be set as a whole week. For specific date of Recording Timer Schedule, it is not recommended to set End Time over 23:59. For Example:If you set Time
ページ17に含まれる内容の要旨
(MENU) SEARCH TIMER RECORD ► RECORD 1. HDD OVERWRITE CAMERA SYSTEM Select “YES” to overwrite previous recording video in HDD. EVENT NOTE : When the HDD is full under O/W Recording mode, previous recorded files may be overwritten without further warning notices. NETWORK 2. RECORDING IPS Select the images per second of recording. The options are (RECORD) as following : ► HDD OVERWRITE: NO RECORD IPS: 25A NTSC－25A、15、8、4、2、1 RECORD QUALITY : NORMAL PAL－18A、12、6、3、2、1 ALARM REC IPS: 25A NOTE : “
ページ18に含まれる内容の要旨
NETWORK (MENU) Press the “▲”“▼””◄”“►” buttons to move the cursor. SEARCH TIMER Press the “+”“-” buttons to change the digit. RECORD Press the “MENU” button to confirm the changes/ to exit the menu. CAMERA SYSTEM EVENT Set IP ADDRESS, GATEWAY, NET MASK, DNS and PORT. ► NETWORK Choose YES in RESET DEFAULT will go back to default value of NETWORK. (NETWORK) SERVER IP 192.168.001.010 GATEWAY 192.168.001.065 NET MASK 255.255.255.000 DNS 168.095.001.001 WEB PORT 00080 RESET DEFAULT NO 14
ページ19に含まれる内容の要旨
MOTION DETECTION MOTION DETECTION SETUP 1. Press “ MENU “ to enter the menu set up, then “ Down ” to CAMERA setup. 2. Press “ENTER” twice to enter the Motion Detection Setup. 3. Each screen displays the current camera picture overlaid with the motion targets (as Figure 1). You can push the button “ Left ” or “ Right ”, ” Up ” or “ Down ” to adjust motion detection in ON or OFF. 4. The targets on each motion setup can be turned to ON or OFF individually. To set up targets, using the front p
ページ20に含まれる内容の要旨
Figure 1-1 MOTION DETECTION SETUP — 1~15 Figure 1 MOTION DETECTION SETUP 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 032 032 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Figure 1-3 MOTION DETECTION SETUP-- ALL Figure 1-2 MOTION DETECTION SETUP-- LINE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 032 032 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- EVENT
