ページ1に含まれる内容の要旨
User Guide
QIP6200/QIP64xx Series
Set-TopTerminals
High-Definition
Watch and Record DVR
ページ2に含まれる内容の要旨
CAUTION RISK OF ELECTRIC SHOCK CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Graphical symbols and supplemental warning marking locations on bottom of terminal. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION TO PREVENT ELECTRICAL SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9 Do not defeat the safety purpose of the
ページ4に含まれる内容の要旨
Regulatory Information Federal Communications Commission Radio and Television Interface Statement for a Class ‘B’ Device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in the residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance wi
ページ5に含まれる内容の要旨
Software License IMPORTANT: PLEASE READ THIS SOFTWARE LICENSE (“LICENSE”) CAREFULLY BEFORE YOU USE ANY SOFTWARE, FIRMWARE AND RELATED DOCUMENTATION (“SOFTWARE”) PROVIDED WITH MOTOROLA’S DIGITAL CABLE RECEIVER OR HOME THEATER SYSTEM (EACH SHALL BE REFERRED TO IN THIS LICENSE AS A “RECEIVER”). BY USING THE RECEIVER AND/OR USING ANY OF THE SOFTWARE, YOU INDICATE YOUR ACCEPTANCE OF EACH OF THE TERMS OF THIS LICENSE. UPON ACCEPTANCE, THIS LICENSE WILL BE A LEGALLY BINDING AGREEMENT BETWEEN Y
ページ6に含まれる内容の要旨
Contact Us For technical support of your set-top, call Motorola Support at 1-866-668-2271 or 1-866-MOT-BCS1. For questions about your TV service, call your local service provider. For Motorola consumer products, education, and support: http://www.motorola.com/broadband ___________________________________________________________________________________ Copyright © 2005 by Motorola, Inc. All rights reserved. No part of this publication may
ページ7に含まれる内容の要旨
QIP6200/QIP64xx User Guide CONTENTS Introduction ........................................................................................... 3 QIP6200/64xx – Front and Back Panels ....................................... 4 Front Panel Description ................................................................. 4 Back Panel Description.................................................................. 6 Operation ..........................................................................
ページ8に含まれる内容の要旨
IEEE 1394 ................................................................................ 25 DVI or HDMI ............................................................................ 26 Connecting Your Set-top to an HDTV – Audio Only....................... 27 Connecting HDTV – Audio Only.................................................. 28 Connecting Your Set-top to an A/V Receiver – Audio Only........... 29 Connecting an A/V Receiver – Audio Only ................................ 30
ページ9に含まれる内容の要旨
QIP6200/QIP64xx User Guide INTRODUCTION Congratulations on receiving a Motorola QIP6200\QIP64xx Series High-Definition Set-top Terminal. This product will enable you to enjoy the outstanding quality of all-digital audio and video, as offered in either standard or high-definition formats. In addition, the QIP64xx offers full DVR functionality to record and play back the shows you want to watch. With its second tuner, the QIP64xx also allows “watch and record” capabilities so you can r
ページ10に含まれる内容の要旨
QIP6200/64xx – Front and Back Panels Front Panel Front Panel Description Item Description 1 INFO switch – Displays current channel and program information 2 MENU switch – Displays the menu area 3 POWER switch – Turns the QIP6xxx on or off 4 MSGS. indicator – Is lit when a message is waiting 5 RECORD indicator – Is lit when the DVR is recording (QIP64xx models only) 6 SELECT switch – Used for selecting menu options 7 GUIDE switch – Displays the electronic program guide 8 R
ページ11に含まれる内容の要旨
QIP6200/QIP64xx User Guide Item Description 14 DISPLAY – Displays channel number and time of day 15 REMOTE indicator – Is lit when remote control is in use 16 CHANNEL – Scrolls up or down through the channels * Feature is enabled by your service provider with associated EPG software. Check with your service provider before attaching any device. 5
ページ12に含まれる内容の要旨
Back Panel Back Panel Description Item Description 1 RF IN – Connects to digital TV input from your service provider 2 RF OUT – Connects to TV or VCR (optional interface) 3* IR – Enables QIP6xxx to control a VCR while recording a selected program (not supported by all program guides) 4 SPDIF (coaxial) – Provides Dolby® Digital 5:1 audio (surround sound) or PCM audio 5 S-VIDEO – Connects to S-Video input of TV or VCR 6* VIDEO IN – Connects to baseband video output from a VCR
ページ13に含まれる内容の要旨
QIP6200/QIP64xx User Guide Item Description 13* AUDIO IN (Left and Right aligned vertically) – Connects to a baseband audio output from a VCR, camcorder, or other audio device (requires EPG support) 14 AUDIO OUT (Left and Right aligned vertically) Connect to baseband audio input of a stereo receiver 15 TVPC – TV pass card – For future use 16* USB PORT – Connects to support USB 2.0 devices. Check with your service provider for details. 17* SATA – Connects to support external hard d
ページ14に含まれる内容の要旨
OPERATION Turning Power On and Off Press POWER on the front panel to turn the set-top on or off. When using the remote control, be sure you press CABLE before pressing POWER. Changing Channels You can change channels in two ways: CHANNEL or on the front panel of the set-top, or • Press press CHANNEL + or - on the remote control to step through the channel selection. • Enter the number of the channel you wish to view using the number keys on the remote control. Adjusting the V
ページ15に含まれる内容の要旨
QIP6200/QIP64xx User Guide DIGITAL VIDEO RECORDER (DVR) – QIP64XX MODELS ONLY The QIP64xx is equipped with an internal hard drive for digital video recording of both standard definition TV (SDTV) and high-definition TV (HDTV) programs. Storage time depends on the video format of the received program. What is DVR? DVR, which stands for digital video recorder, records and plays digital video using hard-disk drive technology. Unlike an analog cassette tape, the QIP64xx's hard drive a
ページ16に含まれる内容の要旨
Simultaneously Record Two Shows Record two programs from two different channels at the same time Simultaneously Record Shows and Watch a Recorded Program Watch a program recorded on your QIP64xx while recording up to two other programs at the same time. You can also easily switch between viewing the pre-recorded program and either of the programs that you are recording. Refer to your service provider’s instructions for the menu-driven recording and viewing options available on
ページ17に含まれる内容の要旨
QIP6200/QIP64xx User Guide OPTIMIZING YOUR SET-TOP FOR HIGH-DEFINITION TV The QIP6xxx enables you to view HD programming. HDTV provides up to twice the resolution and up to six times the sharpness of standard definition TV. The Motorola QIP6xxx delivers high-quality video for HDTVs using the YPbPr (component), HDMI, and IEEE 1394 connectors. This section describes how to use the on-screen display to set your QIP6xxx to automatically optimize both standard and HD video based on your
ページ18に含まれる内容の要旨
This screen appears if the HDMI port is active: Note: For HDMI or YPbPr, only PC1 or PC2 can be selected. USER SETTINGS TV TYPE 16:9 (4.3 LETTERBOX, 4:3 PAN/SCAN) HDMI/YpbPr OUTPUT 1080i (720P, 480P, 480I, PC1-VGA, PC2- 4:3 OVERRIDE 480i (480P, STRETCH, OFF) CLOSED CAPTION DISABLED SERVICE SELECTION ANALOG CC1 DIGITAL PRIMARY LANGUAGE FONT SIZE AUTO FONT STYLE AUTO FONT COLOR AUTO FONT OPACITY AUTO FONT EDGE TYPE AUTO FONT EDGE COLOR AUTO BACKGR
ページ19に含まれる内容の要旨
QIP6200/QIP64xx User Guide 3 Use the remote control or the CURSOR keys on the front panel to navigate the on-screen display (the HD settings are described in the table on the following pages): • Press the ▲ and ▼ keys to highlight the setting you wish to change. Press the ► key to select an option for that setting. • To exit the setting and move to another setting, use the ▲ and ▼ keys. 4 To exit the menu and save your settings, press the POWER or MENU key. The HDMI/YPbPr OUTPUT
ページ20に含まれる内容の要旨
User Settings Setting Description TV TYPE Sets the aspect ratio. The front panel display indicates the type you select. The default is 16:9. Options are 16:9 for wide screen TVs, or 4:3 LETTERBOX or 4:3 PAN/SCAN for standard TVs: • 4:3 LETTERBOX fits wide screen programming on the screen by placing black bars at the top and bottom. • 4:3 PAN/SCAN fills the screen by cropping the left and right edges of wide screen programming. HDMI/YPbPr Sets the video display format for the com
