ページ1に含まれる内容の要旨
USER’S MANUAL
9CH/16CH MPEG4
PS Series Digital Video Recorder
Ver. 2.0
555-A West Lambert Rd. Brea, CA 92821
Tel: 714-672-0333, Fax: 714-672-0360
www.PelikanCam.com
About this user guide
Before installing and using this unit, please read this user guide carefully.
Be sure to keep it handy for later reference.
The specification and information are subject to change without notice for quality improvement.
ページ2に含まれる内容の要旨
Safety Precautions Explanation of Graphical Symbols This symbol indicates the presence of important operating and maintenance (servicing) instruction in the literature accompanying the product. This symbol indicates the presence of un-protected ”dangerous voltage” within the product’ s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Cautions This product has multiple-rated voltages (110v and 220v). See installation instructions before connecting t
ページ3に含まれる内容の要旨
Warnings Installation and servicing should be performed only by qualified and experienced personnel. Power off the DVR when connecting cameras, audio or sensor cables. The manufacturer is not responsible for any damage caused by improper use of the product or failure to follow instructions for the product. The manufacturer is not responsible for any problems caused by or resulting from the user physically opening the DVR for examination or attempting to fix the unit. The manufacturer may not be
ページ4に含まれる内容の要旨
Rack Mount Instructions The following or similar rack-mount instructions are included with the installation instructions: A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature (Tma) specified by the manufacturer. B) Reduced Air Flow - Instal
ページ5に含まれる内容の要旨
Product Components The package contains the main unit and its components as specified below. When you purchase the unit, please check to ensure the components specified below are included. DVR Set CDRW (Option) Client Software CD Remote Control Battery1.5V (AAA x 2EA) User Guide IDE HDD Cable 80pin (1EA) IDE CDRW Cable 40pin(1EA)-(Option) Power Cable HDD Brackets (2EA) & Screw (8EA) CDRW Bracket(1EA) & CDRW Screw (8EA) HDD & CDRW Bracket Screw (12EA) Rack Mount (2EA)-(Option) & Screw (6EA) Power
ページ6に含まれる内容の要旨
Video Signal Select & RS-422/485 Settings Video mode Video output NTSC PAL BNC VGA RS-422/485 Select RS-485 Termination 485 422 ON OFF NOTICE 1. Do not change the setting when the power is on. When the switch is changed, the DVR should be rebooted to apply the new setting. 2. RS-485 Termination ON/OFF function is available on specific hardware version of the system. Please inquiry the manufacturer. 6
ページ7に含まれる内容の要旨
Compatible HDD Models Company Capacity RPM Buffer Interface 80 GB 7200 RPM 2 M E-IDE 160 GB 7200 RPM 8 M E-IDE HITACHI 250 GB 7200 RPM 8 M E-IDE 500 GB 7200 RPM 8 M E-IDE 80 GB 7200 RPM 2 M E-IDE 200 GB 7200 RPM 2 M E-IDE MAXTOR 250 GB 7200 RPM 8 M E-IDE 300 GB 7200 RPM 16 M E-IDE 80 GB 7200 RPM 2 M E-IDE 160 GB 7200 RPM 2 M E-IDE SAMSUNG 250 GB 7200 RPM 8 M E-IDE 300 GB 7200 RPM 8 M E-IDE 160 GB 7200 RPM 2 M E-IDE Western Digital 200 GB 7200 RPM 8 M E-IDE 250 GB 7200 RPM 8 M E-IDE 80 GB 7200 RP
ページ8に含まれる内容の要旨
CDRW or DVD-Combo Installation Guide 1. Open the top cover of DVR set and Install the CDRW inside the DVR. 2. Fasten the screws on both side of CDRW as indicated in red circle below. 3. Connect the IDE CDRW 40pin cable and Power cable to the point on both CDRW and Main board as indicated in red circle below. 4. CDRW JUMPER SETTING = MASTER Compatible CD-RW model LG GCE-8525B / GCE-8526B / GCE-8527B Compatible DVD-Combo model LG GCC-H23N 8
ページ9に含まれる内容の要旨
HDD Installation Guide 1. Unfasten the cover of the unit. 2. Fix the bracket to the hard disk using the supplied HDD mounting bracket screws. 3. Connect the supplied IDE HDD 80pin cable and Power cable to the hard disk and fix the hard disk to the unit the supplied HDD fixing screws. 4. HDD JUMPER SETTING ST 1 HDD = MASTER nd 2 HDD = SLAVE 9
ページ10に含まれる内容の要旨
Specifications ITEM DVR-9CH/16CH Channel, Input Level 9/16CH, Composite 1.0Vp-p, 75 Ohm Input Signal Format NTSC/PAL Video Loss Check Yes Video Main Monitor Output 1 CH BNC, 1 CH S-VIDEO, 1CH VGA Output Level Composite 1.0Vp-p +_0.2, 75 Ohm Output Signal Format NTSC/PAL & VGA Etc Output 9/16CH Loop-back , 1CH SPOT Input & Output 4 CH Line input & 1 CH Line output Audio Audio Codec G.711 Sensor Input 9/16 (NC/NO Selectable) Alarm Alarm Output 4 Alarm Output By Alarm, Motion, Video Loss Compressio
ページ11に含まれる内容の要旨
Max HDD Number 4 NaFS: Own developed & Designed for never broken File system by any power failure USB 2.0 flash stick Still Image & AVI Backup CDRW Still Image & AVI Network Moving picture & Still Image Menu Display GUI User I/F Input Method Front Keypad, Remote controller Console & External Modem 1 RS-232C (9pin D-SUB connector) Serial port Camera control 1 RS-485/422 (4 Terminal Block) Dynamic IP support Yes Network Network Interface 10/100 base-T Ethernet (RJ-45) Functions Live, Search, Backu
ページ12に含まれる内容の要旨
Table of Contents 1. Features...............................................................................................................................14 2. Name, Function and Connection .......................................................................................15 2-1. Front Panel.................................................................................................................15 2-2. Rear Panel.......................................................................
ページ13に含まれる内容の要旨
5-2-5. Go To Specific Time.................................................................................................46 5-2-6. Log List Search........................................................................................................46 5-2-7. Archive Search ........................................................................................................47 5-3. Play mode......................................................................................................
ページ14に含まれる内容の要旨
1. Features ● 9/16 channels real-time live display and 9/16 channels simultaneous playback. ● MPEG-4 - Unbeatable recording picture quality and compression ratio. Best format for minimizing recording space and bandwidth requirements for network transmission. ● TRIPLEX - Simultaneous recording, playback and transmission via network ● NaFS (File System) - Designed to prevent data loss or corruption in the event of a power failure. ● Multiplexing operation ● Reliability - Real Time Operating System
ページ15に含まれる内容の要旨
2. Name, Function and Connection 2-1. Front Panel The following information will help you to operate the front panel controls. Figure 2.1.1. Front panel Table2.1.1. Indication lamps NO. Name Description A HDD Indicating that the system is accessing the hard disk. B RECORD Indicating that the system is recording video data. C ALARM Indicating that when sensor(s) is/are triggered or motion is detected. D NETWORK Indicating that when Network client connects through the network. E BACKUP Indicating
ページ16に含まれる内容の要旨
SINGLE- Highlighted channel only. MIX- All of 4 channels. 8 Jump/Step backward. In playback mode, the playback position moves F/REW 60 seconds backward. 9 ALARM Press to enable/disable ALARM operation. 9 F/ADV Jump/Step forward. In playback mode, the playback position moves 60 seconds forward. 10 FF Press to fast forward the footage in playback mode. 11 REC Press to start or stop manual recording. 12 SEARCH Press to go to SEARCH menu in live display mode. PLAY/PAUSE Press to play and pause the f
ページ17に含まれる内容の要旨
2-2. Rear Panel Figure 2.2.1. Rear Panel Table 2.2.1. Rear panel connections NO Connection Purpose 1 VIDEO IN 9/16 connectors for video input. (NTSC/PAL) 2 VIDEO OUT 9/16 connectors for video output. (Loop Back) 3 SPOT Composite video output for spot monitoring. 4 VIDEO Composite video output in NTSC or PAL format. 5 S-VHS S-VHS output. 6 VGA Connector for VGA monitor. 7 AUDIO IN 4 connectors for audio input. 8 1 connector for audio output. AUDIO OUT 9 RS-232 For engineering use only. 10 LAN RJ-
ページ18に含まれる内容の要旨
2-3 Remote controller POWER Power On/Off Display of Full, Quad or 9 split view DISPLAY F/REW Jump 60 seconds backward PLAY Play/Pause F/ADV Jump 60 seconds forward BACK UP Back up FF Fast Forward Disable alarm operation ALARM SETUP Setup menu screen AUDIO Disable, Mute or Highlighted channel only LOCK Locks functions SEQ Sequence of Full or Quad view RECORD Manual recording Search menu screen SEARCH DIRECTION Direction or number 1 to 4 SELECT Enter ID DVR ID (ID Button + DVR ID number) ESC Esc P
ページ19に含まれる内容の要旨
3. Setting up the DVR The following sections detail the initial setup of the DVR 3-1. Setup – Main Screen When the SETUP button is pressed, the DVR will ask for a password. The default password is 1111, which can be entered by pressing the up button 4 times and then pressing the SEL button. It is recommended that a new password be assigned to protect the system. The procedure for assigning a password is found in section 3.7. After a password has been assigned, enter the password by using the dir
ページ20に含まれる内容の要旨
DISPLAY OSD SEQUENCE SEQ-DWELL TIME OSD CONTRAST CHANNEL DISPLAY, BRIGHTNESS, CONTRAST, HUE, SATURATION RECORD RESOLUTION CHANNEL FRAME RATE, QUALITY, RECORDING, SENSOR RECORDING, PRE RECORD, POST EVENT RECORD, AUDIO, SCHEDULE DEVICE ALARM OUT SPOT -OUT PTZ CHANNEL MOTION ZONE, MOTION SENSITIVITY KEY TONE REMOTE CONTROL ID SENSOR TYPE STORAGE OVERWRITE DISK FORMAT DISK INFO RECORDING LIMIT RECORDING LIMIT DAYS SYSTEM DVR-ID DESCRIPTION LANGUAGE DATE FORMAT SET DATE & TIME SEND EMAIL PASSWORD ADM
