ページ1に含まれる内容の要旨
Stinger J16
16ch DVRX - TCP/IP - JPEG 2000 Model
User Manual
ページ2に含まれる内容の要旨
About This Manual ABOUT THIS MANUAL Before installing stand alone DVRX, be sure to thoroughly review and follow the instructions in this User’s Manual. Pay particular attention to the parts that are marked NOTICE. Strong recommendation on installation of the DVRX unit 1. Check the electrical source at the location you want to install the DVRX unit is stable and meets the DVRX electrical specifications. Unstable electrical supplies may cause recording malfunctions or give critical damage to the u
ページ3に含まれる内容の要旨
Installation & Safeguards INSTALLATION & SAFEGUARDS All the safety and operating instructions should be read before the unit is operated. Environment Condition for Installation To prevent electric shock or other hazard, do not expose units to rain, moisture, or dust. This unit should be located in an area with low humidity and a minimum of dust.. Place this unit in a well-ventilated place and do not place heat-generating objects on this unit. This unit should not be located in an area where i
ページ4に含まれる内容の要旨
Features Features 1-1. Features Live View Real time display per camera Auto Sequence PIP (Picture in picture) Digital Zoom Display Freeze Simple Playback mode Simple PTZ camera control Record Variable Record resolution (For higher picture quality or higher recording speed) Efficient Image Quality setup in 5 steps Schedule Record / Holiday Record Event Record (Alarm / Motion) Emergency Record Network View Live and Playback images across IP network Copy images across the network Playback Search &
ページ5に含まれる内容の要旨
Installation Overview INSTALLATION OVERVIEW
ページ6に含まれる内容の要旨
Keyboard Controls KEYBOARD ' # % $ & ! ( " Optional Remote Keyboard See button references on next page NOTICE: If several buttons are simultaneously or incorrectly pressed, the system may not respond properly.
ページ7に含まれる内容の要旨
Keyboard Controls Numbered Items Function 1. LED Lamps Shows status of DVR operation. 2. USB Firmware Port Firmware upgrade by connecting PC with latest firmware to USB port. 3. Camera selection & PTZ camera control a. Pressing this button will display a full screen image of that camera. b. Control PTZ camera (Each button is assigned for each PTZ command). ON: LIGHT ON SET: SET PRESET OFF: LIGHT OFF CLEAR: CLEAR PRESET OPEN: IRIS OPEN GOTO: GOTO PRESET CLOSE: IRIS CLOSE AUTO: AUTO SCAN NEAR: FOC
ページ8に含まれる内容の要旨
Connections DVR CONNECTIONS 1. RS-232C Port Connection for control of DVR via PC. 2. Alarm/Relay Inputs/Outputs + PTZ Control. 3. WLAN/Laptop Connection: TCP/IP. 4. Camera Connections. 5. Camera LOOP Outputs. 6. 2 x MONITOR Connections. Battery connector – Amphenol C16-1 3W+ PE plug PG 9 Pin 1 12 VDC or 24VDC (dependant on version ordered) Pin 2 GND Pin 3 12 VDC or 24VDC ignition feed (delay off controller) 12VDC camera / TFT connector – Amphenol C16-1 3W + PE PG 9 +12VDC -12VDC (0V – isolated
ページ9に含まれる内容の要旨
Installation INSTALLATION 1. Camera Connection Connect the camera to a CAMERA INPUT on the Front Panel of the unit. Notice: This DVRX system automatically detects the video standard(PAL/NTSC) of the camera you connect to the unit when you initialise the DVRX system. 2. Monitor Connections (Composite Connection Method) Connect the driver’s monitor to a MONITOR OUT on of the unit. NOTICE: ONLY connect cameras or monitors to DVRX while the DC power is switched OFF.
ページ10に含まれる内容の要旨
Installation 3. Alarm Connections Connect the alarms to the SENSOR INPUT/OUTPUT on the unit. Relay output: COM+NC, COM+NO OR COM+NC+NO Alarm input: A short-circuit between Alarm 1, Alarm 2, Alarm 3 or Alarm 4 and GND will be recognized as an alarm (VOLTAGE FREE) . NOTICE: Alarm input is RECOGNIZED as LOW when alarm signal is on a level with GND, and recognized as HIGH when alarm signal is FLOATING or 5V. Above is the internal circuit. Be aware there is a danger of damage, if the alarm input goes
ページ11に含まれる内容の要旨
Operation OPERATION 4-1. System Log-In 4-1.1. To enter into the setup menu, press the [MENU] button. 4-1.2. Enter password with camera number buttons from 1 to 10 on the DVRX keyboard. (Maximum of 8 digits are available) 4-1.3. After entering the password, press the [ENTER] button. Administrator : If the password entered matches previously set password, “LOGIN ADMIN” message appears and you can enter into SYSTEM SETUP. If the password entered does not match previously set password, the DVRX u
ページ12に含まれる内容の要旨
Operation 4-3. Display On-Screen Information 4-4. Live View Options 4-4.1. Full/Multiple View Switch to multi-screen display by pressing [MODE]. For full image display, just press the channel button you require or [MODE] button again. [MODE] or Full Screen [MODE] Full Screen Multi Screen Channel Button
ページ13に含まれる内容の要旨
Operation 4-4.2. Sequence Press [SEQ] button. It automatically displays full screen images in sequence. 4-4.3. Picture in Picture (PIP) When it is in full screen display mode, you can see any other camera in a small window by pressing [PIP].The other cameras in small window rotate in sequence to the next camera and you can set the sequence time interval as per the procedure in SYSTEM MENU/CONFIGURATION/INTERVAL SETUP. 4-4.4. Freeze Full display mode: If you press the [FRZ] button, the FRZ icon w
ページ14に含まれる内容の要旨
Operation 4-5. Record Recording mode is set before delivery by the manufacturer (Default recording mode) is Schedule Recording. In this default recording mode, it records 24 hours/day continuously. Once you press the [REC] button when viewing live images, the record type is changes to Emergency Record mode. Emergency Record: Records at full resolution/in best quality Record type: CONTINUOUS, SUPER FINE quality, 60 (50) ips at 720X240 (720x288) Schedule Record: Records and stops as set (time inte
ページ15に含まれる内容の要旨
Operation 4-6. Playback In record mode or stop mode, press the [PLAY] button to play the recorded images in real time (1x speed). For reverse playback, press [PLAY] button again to change direction of play. Use the Jog/Shuttle to pause and control playback speed. To stop playback, press the [STOP] button. Using Jog/Shuttle Press the [J.SHUTTLE] button in playback mode. The [ACTIVE] LED will be lit, and Jog/Shuttle is ready for use. The [RUN] LED will blink whenever you operate the Jog/Shuttle
ページ16に含まれる内容の要旨
Operation 4-7. Search Press [SEARCH] button, and 3 different methods for searching recorded images are shown in the window displayed. To select search method, use the direction keys or Jog/Shuttle. After selecting each search method, press the [ENTER] button to start playback. To exit, press the [MENU] button. 4-7.1. SEARCH BAR Search by percentage of total recorded images. It starts from the image corresponding to the displayed % of the Search Bar. 4-7.2. TIME/DATE Searches by time & date. Pla
ページ17に含まれる内容の要旨
Operation 4-8. PAN/TILT/ZOOM Camera Operation Press [PTZ] button first for PTZ control mode. Numeric buttons from 1 to 16 and direction buttons are assigned for each PTZ command, and user can control PTZ camera connected to DVR unit by pressing any one of those 20 buttons, one after the other, as needed, and it is just like control by separate PTZ controller. Button PTZ Command Button PTZ Command 1. ON LIGHT ON 10. CLEAR PRESET CLEAR 2. OFF LIGHT OFF 11. GOTO PRESET GOTO 3. OPEN IRIS OPEN 12. AU
ページ18に含まれる内容の要旨
Setup SETUP 5-1. Entering into the Menu Enter into SYSTEM MENU by pressing [MENU] button. Button Function MENU Enter into SYSTEM MENU. Move to previous menu, ESC ENTER Selection key, Move to sub-menu, change status (ON or OFF) NEXT Move to next page UP Move to upper side DOWN Move down side LEFT Move to the left RIGHT Move to the right [-] MINUS Decrease the option value [+] MINUS Increase the option value Jog left turning: Move backward to next image/Decrease value Jog right turning: Move forwa
ページ19に含まれる内容の要旨
Setup 5-2. Display Setup Setting up parameters for monitor and display on screen. Enter into SYSTEM MENU-DISPLAY SETUP. 5-2.1. Screen Display Setting up the screen display in LIVE mode and PLAYBACK mode. Select the sub-menu which you would like to set using direction buttons and then change ON/OFF with [ENTER] button. 1. TIME/DATE: Display time & date 2. DVR STATUS: Display system setting status 3. ICON DISPLAY: Display function setting status 4. REC/PLAY BAR: Display record / playback status 5
ページ20に含まれる内容の要旨
Setup 5-3. Configuration Various parameters for system can be set in CONFIGURATION menu. Enter into SYSTEM MENU-CONFIGURATION and press the [ENTER] button. 5-3.1. HDD Management Enter into SYSTEM MENU-CONFIGURATION-HDD MANAGEMENT and press the [ENTER] button. 1. HDD Setup This page includes information about start and end of recording, location of recorded data, or location of last playback on HDD. In addition, users can delete all the images on the HDD. On the [HDD CLEAR] sub-menu, press the [
