ページ1に含まれる内容の要旨
SVAT ELECTRONICS
Now You Can See
WEB READY DVR SYSTEM
W/ 4 OUTDOOR COLOR NIGHT VISION SECURITY CAMERAS
COMPLETE SYSTEM
Instruction Manual
Model #
CV0204DVR
www.svat.com
ページ2に含まれる内容の要旨
SVAT ELECTRONICS Now You Can See PRODUCT WARRANTY & REGISTRATION PRODUCT WARRANTY & REGISTRATION Please visit our website at www.svat.com to apply for your products warranty registration. The warranty registration for is located under the support tab on the SVAT website. We take quality very seriously. This is why all of our products come with a one year warranty from the original purchase date against defects in workmanship and materials. If you have warranty or support issues please contac
ページ3に含まれる内容の要旨
SVAT ELECTRONICS Now You Can See TABLE OF CONTENTS TABLE OF CONTENTS WHAT IS INCLUDED ............................................................1 WHAT IS COMPATIBLE ........................................................1 SAFETY PRECAUTIONS......................................................2 INTRODUCTION / FEATURES ............................................3 CAMERA SETUP ..................................................................4 INSTALLATION...................................
ページ4に含まれる内容の要旨
SVAT ELECTRONICS Now You Can See SAFETY PRECAUTIONS SAFETY PRECAUTIONS Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems). This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed
ページ5に含まれる内容の要旨
SVAT ELECTRONICS Now You Can See INTRODUCTION INTRODUCTION This complete system comes with four outdoor cameras and can display all four at the same time. Customize the recording and set a 24 hour recording schedule based on your preferences. You can choose to have the DVR record continuously during the day, then record only when motion is detected at night. And since each camera is equipped with night vision, you can view and record in pitch blackness! This DVR can record four different cam
ページ6に含まれる内容の要旨
SVAT ELECTRONICS Now You Can See 1. CAMERA SETUP 1. CAMERA SETUP Step One Locate a desired mounting location for the camera and fasten in using the included hardware. Connect the supplied wire to the wiring on the back of the camera. 1 Step Two Connect the other end of the provided wire to the RCA inputs on your monitoring device. Also connect the power supply to the cable. 2 Step Three Turn the monitor on. On most TVs and VCRs you will have to access the Input, or AC Channel to view the imag
ページ7に含まれる内容の要旨
SVAT ELECTRONICS Now You Can See 2. INSTALLATION 2. INSTALLATION CONNECTORS ON THE REAR PANEL Please setup the connection by following the illustration shown below (detailed instructions on using the network function can be found in Section 9): 1) Plug the power cord into your DVR and plug it into an outlet. SVAT recommends plugging it into a surge protected power bar for your device's protection. 2) Plug the BNC Connectors into each video input you plan on using. For example, if you are usi
ページ8に含まれる内容の要旨
SVAT ELECTRONICS Now You Can See 3. NAME AND FUNCTION OF EACH PART 3. NAME AND FUNCTION OF EACH PART 3.1 FRONT PANEL 1. Quad screen display. 2. CH 1 screen display. 3. CH 2 screen display. 4. CH 3 screen display. 5. CH 4 screen display. 6. MENU: Menu button. 7. Up direction button. 8. Down direction button. 9. ENTER: Enter button. 10. REW: Rewind button. 11. STOP: Press this button during playback and recording to return to monitoring mode. 12. PAUSE: Press this button during playback mo
ページ9に含まれる内容の要旨
SVAT ELECTRONICS Now You Can See 4. OPERATING PROCEDURE 4. OPERATING PROCEDURE 4.1 POWERING ON This DVR is built to be on at all times, and therefore should be connected to a surge protected power bar (UPC power backup). Use the power bar's switch to turn the unit off and on. This is especially important as loss of power while recording could possibly damage the hard drive. Every time the DVR is powered on, it will auto-detect its peripherals (self-testing, warm-up, auto detects the hard driv
ページ10に含まれる内容の要旨
SVAT ELECTRONICS Now You Can See *Note ~ CH1: No block figure next to CH1 indicates that it is not recording. EACH: Record Type QUAD: Record Type (M): MASTER HDD (T): TIMER RECORD (A): ALARM RECORD (M): MIX RECORD ( ): Currently under recording. VIDEO LOSS: Video input unable to be detected. CAMERA1: Title for CH 1. OFF: Channel is set to “OFF”. 4.4 PLAYBACK MODE To play your recordings, press PLAY. A list of your recordings will appear after a slight delay. Use the up and down arrows to
ページ11に含まれる内容の要旨
SVAT ELECTRONICS Now You Can See 5. SYSTEM SETUP 5. SYSTEM SETUP 5.1 MENU 1. Main Menu 2. Menu Layer Indication: The device consists of four menu layers. : First Menu Layer (Main Menu) : Second Menu Layer : Third Menu Layer : Fourth Menu Layer 3. Menu Operation and Setup Press the up or down button to move the cursor ( > ). Press the ENTER button to enter the sub menu. Press MENU button: Under the second or third menu layer, the system will return to the previous menu layer (second layer
ページ12に含まれる内容の要旨
SVAT ELECTRONICS Now You Can See 5.2 SYSTEM SETUP 1. Cursor (>) position indicates the current function selected. 2. Press the up and down buttons to move the cursor. 3. Press ENTER button to proceed. 4. Press MENU button to exit “System Setup”. 5. “System Setup” is situated on the second menu layer. Under this menu layer user may setup the system time, password, return system to default value, and language preference, etc (VERSION displayed represents the FIRMWARE version). CV0204DVR 10
ページ13に含まれる内容の要旨
SVAT ELECTRONICS Now You Can See 5.2.1 TIME SETUP Time Set - Sets the time and date on your DVR. Use the up and down arrows to select a value to change, and press ENTER to change the value. When you are finished, press MENU to return to the previous menu screen. Time is in YEAR/MONTH/DAY format CV0204DVR 11
ページ14に含まれる内容の要旨
SVAT ELECTRONICS Now You Can See 5.2.2 PASSWORD SETUP 1. Cursor (>) position indicates the current function selected. 2. Press the up and down buttons to move the cursor. 3. Press ENTER button to proceed. 4. Press MENU button to exit “Password Setup”. 5. Select MENU PASSWORD to password-protect your DVR menu from unwanted changes. The password must be entered any time someone tries to access the main menu. Select MENU PASSWORD again to turn this feature off. 6. Select STOP REC PASSWORD to p
ページ15に含まれる内容の要旨
SVAT ELECTRONICS Now You Can See 5.2.2.1 CHANGE PASSWORD 1. Press ENTER to show the display above. 2. Enter the current password (CURRENT PASSWORD). 3. Enter new password (NEW PASSWORD). 4. Confirm the new password (CONFIRM PASSWORD). 5. When password change is successful, the system will display “PASSWORD CHANGED”. Default Value: 111111 If password entered is incorrect, you will receive a message “NO PASSWORD CHANGED” to inform you (message flashes three times) and the system returns to “Pas
ページ16に含まれる内容の要旨
SVAT ELECTRONICS Now You Can See 5.2.3 LOAD DEFAULT Press enter on this option to return the DVR to its factory default settings. Press enter again to confirm, or menu to cancel. When the message “DVR RESET COMPLETED TURN OFF AND ON THE VCR” is displayed, restart the DVR. CV0204DVR 14
ページ17に含まれる内容の要旨
SVAT ELECTRONICS Now You Can See 5.2.4 LANGUAGE SETUP To setup “LANGUAGE SET” function, press ENTER, to select the desired language (languages supported are Chinese and English). CV0204DVR 15
ページ18に含まれる内容の要旨
SVAT ELECTRONICS Now You Can See 5.3 CAMERA SETUP 1. Camera Enable - Select this option to change the camera view combination. For example, if you select (- - - -), all camera channels will be disabled, and a black screen will be displayed. If you select (1 2 3 4), all cameras channels will be enabled and displayed. If you select (- - - 4), only the camera 4 channel will be enabled and displayed. Use the ENTER button to change these combinations. Note: Disable the camera channels that you won
ページ19に含まれる内容の要旨
SVAT ELECTRONICS Now You Can See 5.3.1 CAMERA SETUP 1. Camera Select - Select the camera channel to which you would like to make changes (CH 1-4). 2. Record Enable - Press ENTER to switch the channel recording on/off. 3. Motion Detection - Press ENTER to switch the motion detection function on/off. 4. Motion Sensitivity - Press ENTER to set up the motion sensitivity level (1-5, 1 being the most sensitive). 5. Hue - Press ENTER to adjust the color of the camera. 6. Contrast - Press ENTER to
ページ20に含まれる内容の要旨
SVAT ELECTRONICS Now You Can See 5.4 RECORD SETUP 1. Record Type - Press ENTER to select between QUAD and EACH mode. QUAD mode will record all four cameras, but will not let you view each camera individually during playback. EACH mode will record all four cameras and allow you to view each camera individually during playback. 2. Video Quality - Press ENTER to change between LOW, MEDIUM or HIGH video quality. Higher quality settings will result in better image clarity but larger file sizes. Lo
