ページ1に含まれる内容の要旨
ES
USER’S GUIDE
Please keep all information for future reference.
Safety Precautions
Before trying to use the keyboard, be sure to read the
separate “Safety Precautions”.
GUÍA DEL USUARIO
Guarde toda la información para futuras consultas.
Precauciones de seguridad
Antes de intentar usar el teclado, asegúrese de leer
las “Precauciones de seguridad” separadas.
LK270ES1C
Español English
ページ2に含まれる内容の要旨
NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that inter
ページ3に含まれる内容の要旨
Important! Please note the following important information before using this product. Before using the optional AC Adaptor to power the unit, be sure to check the AC Adaptor for any damage first. Carefully check the power cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC adaptor that is seriously damaged. Never attempt to recharge batteries. Do not use rechargeable batteries. Never mix old batteries with new ones. Use recommended batteries o
ページ4に含まれる内容の要旨
Contents General Guide ............................. E-4 Playing Built-in Songs..............E-26 Using the 10-key Pad ( bs) .................................E-6 Playing the Demo Songs ................................. E-26 FUNCTION Button ( ) Functions .....................E-6 Playing Back a Particular Song........................ E-27 ct Using the Karaoke Feature .............................. E-30 Getting Ready to Play ................ E-8 Increasing the Selection of Songs ...................
ページ5に含まれる内容の要旨
Contents Other Useful Digital Keyboard Reference...................................E-63 Functions .................................. E-49 Troubleshooting ............................................... E-63 Specifications................................................... E-65 Changing the Scale of the Keyboard................E-49 Operating Precautions ..................................... E-67 Using Music Preset ..........................................E-50 Error Messages......................
ページ6に含まれる内容の要旨
General Guide In this manual, the term “Digital Keyboard” refers to the LK-270. • In this manual, buttons and other controllers are identified using the numbers shown below. 1 4 5 6 2 7 3 8 9bk bl bm bn bo bs bp bq br bt ck cl cm cn co cp cq cr csct dk dl dm dn do dp dq dl drds dt E-4
ページ7に含まれる内容の要旨
General Guide POWER button ☞E-9, 25, 45, 61 LISTEN, CHORD/TR1 button ☞E-20, 33 1 bt VOLUME knob ☞E-9 WATCH, TR2 button ☞E-20, 30, 33, 46 2 ck 3 MIC VOLUME knob ☞E-30 cl REMEMBER, TR3 button ☞E-20, 34 PRESET SCALE button ☞E-49 NEXT, TR4 button ☞E-20, 32 4 cm RECORDER button ☞E-30, 44, 45, 46, 47, 48 AUTO, TR5 button ☞E-20, 36 5 cn SING ALONG button ☞E-30 MUSIC CHALLENGE, TR6 button 6 co ☞E-20, 37, 46 METRONOME, BEAT button ☞E-12 7 SPLIT button ☞E-14, 15 cp REPEAT, INTRO button ☞E-28, 34, 41 8 LA
ページ8に含まれる内容の要旨
General Guide Using the 10-key Pad ( ) FUNCTION Button ( ) Functions bs ct Use the number buttons and the [–] and [+] buttons to change You can use the FUNCTION button ( ) to adjust the reverb ct the settings of the parameters that appear in the upper left effect, to delete data, and to perform a wide range of other area of the display. Digital Keyboard operations. To select a function 1. Press to display the function menu. ct 2. Use the (10-key) [4] ( ) and [6] ( ) keys bs to display the f
ページ9に含まれる内容の要旨
General Guide See Function Display Page 1 Transpose Trans. E-16 2 Accompaniment Volume AcompVol E-42 3 Song Volume Song Vol E-29 4 Touch Response Touch E-10 5 Tuning Tune E-16 6 Reverb Reverb E-15 7 Chorus Chorus E-15 8 Sampling SAMPLING Automatic Sampling Start AutoStrt E-23 Automatic Sampling Stop AutoStop E-24 Sampled Tone Protect (Protect) E-25 9 Step Up Lesson LESSON Voice Fingering Guide Speak E-34 Note Guide NoteGuid E-35 Performance Evaluation Scoring E-35 Phrase Length PhraseLn E-35 10
ページ10に含まれる内容の要旨
Getting Ready to Play Using Batteries Preparing the Music Stand Be sure to turn off power before loading batteries. Music stand It is up to you to prepare six commercially available D-size batteries. Do not use oxyride batteries or any other nickel based batteries. 1. Open the battery cover on the bottom of the Digital Keyboard. Power Supply Either an AC adaptor or batteries can be used to power this Digital Keyboard. Normally, use of AC adaptor power is recommended. 2. Load six D-size
ページ11に含まれる内容の要旨
Playing the Digital Keyboard 2 21 1 7 7 bp bp bs bs bo bo ct ct Auto Power Off (Using Batteries) Turning on Power and Playing While you are using batteries for power, power will turn off 1. Press . 1 automatically if you do not perform any operation for about six This turns on power. minutes. Auto Power Off is disabled while the AC adaptor is being used for power. 2. Try playing something on the keyboard. Use 2 ■ Disabling Auto Power Off to adjust volume. You can disable Auto Power Off to e
ページ12に含まれる内容の要旨
Playing the Digital Keyboard 3. Use the (10-key) [4] ( ) and [6] ( ) keys to bs Changing Keyboard Response to display “Demo2”. Touch Pressure (Touch Response) Touch Response alters tone volume in accordance with keyboard pressure (speed). This provides you some of the same expressivity you get on an acoustic piano. D e m o 2 Keyboard Instrument Sound Intensity 4. Press the (10-key) [–] key to select the OFF bs ■ Sound intensity depends on the speed that keys setting. are pressed. People
ページ13に含まれる内容の要旨
Playing the Digital Keyboard Changing Touch Response Sensitivity Adjusting Display Contrast Use the procedure below to control how much the volume of 1. Press and then use the (10-key) [4] ( ) played notes change in accordance with playing speed. ct bs Select the setting that best matches your playing style. and [6] ( ) keys to display “OTHER” (page E-6). 1. Press and then use the (10-key) [4] ( ) ct bs and [6] ( ) keys to display “Touch” (page E-6). O T H E R Flashes T o u c h 2. Press
ページ14に含まれる内容の要旨
Playing the Digital Keyboard Changing the Metronome Tempo Using the Metronome Use the following procedure to change the tempo of the The metronome lets you play and practice along with a steady metronome. beat to help keep you on tempo. 1. Press . bo Start/Stop Use y (slower) and t (faster) to change the tempo setting. Holding down either button changes the setting at 1. Press . 7 high speed. This starts the metronome. Pressing t and y at the same time will initialize the tempo setting in
ページ15に含まれる内容の要旨
Controlling the Keyboard Sounds bq bqbp bp bs bs cp cpcq cq ct ct 3. Try playing something on the keyboard. Select from a variety of musical The tone of the instrument you selected will sound. instrument sounds Your Digital Keyboard lets you select tones for a wide variety of musical instrument sounds, including violin, flute, orchestra, and more. Even the same song sound takes on a different feel by changing the instrument type. To select an instrument for playing 1. Press . bp Playing with
ページ16に含まれる内容の要旨
Controlling the Keyboard Sounds Layering Two Tones Splitting the Keyboard between Two Different Tones You can use the following procedure to layer two different tones (such as piano and strings) so they sound You can use the procedure below to assign different tones to simultaneously when you press a keyboard key. the right range and left range of the keyboard, so it sounds like you are playing an ensemble between two instruments. 1. Select the first tone you want to use. Press and then us
ページ17に含まれる内容の要旨
Controlling the Keyboard Sounds 5. Pressing again to unsplit the keyboard (so it cp Using Reverb plays only the tone you selected in step 1). Each press of toggles between split (two tones) and Reverb adds reverberation to notes. You can change the cp unsplit (one tone). duration of the reverb. 1. Press and then use the (10-key) [4] ( ) ct bs and [6] ( ) keys to display “Reverb” (page E-6). Disappears R e v e r b If you turn on both layer and split, layering will be applied to 2. Use
ページ18に含まれる内容の要旨
Controlling the Keyboard Sounds Using a Pedal Changing the Pitch (Transpose, Tuning, Octave Shift) A pedal can be used to change notes in various ways while playing. A pedal unit does not come with the Digital Keyboard. Changing the Pitch in Semitone Steps Purchase one separately from your retailer. See page E-3 (Transpose) for information about options. The transpose feature lets you change the pitch, in semitone Connecting a Pedal Unit steps. A simple operation lets you instantly chang
ページ19に含まれる内容の要旨
Controlling the Keyboard Sounds Octave Shift Octave Shift lets you raise or lower the pitch of the keyboard notes in octave units. The octave shift setting range is –2 to +2 octaves. When using Split (page E-14), you can individually set the left and right keyboard ranges to the pitches you want. 1. Keep pressing until the screen shown below cq appears on the display. If you want to use Split, turn on Split before pressing . cq If you do not perform any operation for a few seconds aft
ページ20に含まれる内容の要旨
Sampling Sounds and Playing Them on the Digital Keyboard 1 1 3 3 bq bqbp bp bs bs bt btck ckcl clcm cmcn cnco co cs cs ct ct You can sample a sound from a microphone, a portable audio 2. Turn down the volume levels of the external player, or other device, and then play the sound with keyboard device and the Digital Keyboard. keys. For example, you could sample the bark of your dog and then use the sound in a melody. You also can sample and 3. Turn on the external device or microphone, and
