M-Audio DCP200の取扱説明書

ページ1に含まれる内容の要旨

Assembly Instructions
• The stand should be assembled on a flat floor surface.
• Make sur e you are using the correct screws for each assembly step, and only use the screws included with your piano. Use of
incorrect screws can permanently damage the piano.
• All screws should be tightened after each assembly step (except where otherwise indicated).
Tool required: Phillips-head (+) screwdriver.

Remove all parts from their packaging, and verify . Place the cylindrical nuts (G) in the hol

ページ2に含まれる内容の要旨

Slide the Modesty Panel (E) into place so that the two Secure the piano keyboard unit to both the left and 8 11 top screw holes are in front of the two corresponding right sides of the piano stand, using the four (M) metal brackets, and the four bottom screw holes line screws. (Only the left side is shown in this picture.) up behind the Pedal Board (D). Fr om the front of the Modesty Panel, use the two 9 screws (K) with washers to attach the top of the Modesty Panel to the metal bracket