ページ1に含まれる内容の要旨
* 04564778 - 0 2 *
04564778 07-04-2N
DIC500
ページ2に含まれる内容の要旨
Cover1,4
ページ3に含まれる内容の要旨
RP101_e.book 3 ページ ２００７年４月４日 水曜日 午前１１時５０分 WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The lightning flash with arrowhead symbol, within an CAUTION equilateral triangle, is intended to alert the user to the RISK OF ELECTRIC SHOCK DO NOT OPEN presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR constitute a risk of electr
ページ4に含まれる内容の要旨
RP101_e.book 4 ページ ２００７年４月４日 水曜日 午前１１時５０分 USING THE UNIT SAFELY The symbol alerts the user to important instructions or Used for instructions intended to alert the warnings.The specific meaning of the symbol is user to the risk of death or severe injury determined by the design contained within the triangle. should the unit be used improperly. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger. Used for inst
ページ5に含まれる内容の要旨
RP101_e.book 5 ページ ２００７年４月４日 水曜日 午前１１時５０分 USING THE UNIT SAFELY Do not insert foreign objects Place in a well ventilated location 011 101a Never allow foreign objects (flammable objects, When using this device, ensure that it is placed in a well ventilated location. coins, wires, etc.) to enter this device. This can cause short circuits or other malfunctions. ...................................................................................
ページ6に含まれる内容の要旨
RP101_e.book 6 ページ ２００７年４月４日 水曜日 午前１１時５０分 USING THE UNIT SAFELY Unplug the power cord from the AC outlet before cleaning 109a Before you clean the device, turn off the power and unplug the power cord from the AC outlet (p. 12). ...................................................................................... If there is a possibility of lightning strike, disconnect the power cord from the AC outlet 110a If there is a possibility of lightning strike, immediately turn off th
ページ7に含まれる内容の要旨
RP101_e.book 7 ページ ２００７年４月４日 水曜日 午前１１時５０分 Important Notes 291b In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 3 and 4–6, please read and observe the following: 355b Power Supply • When moved from one location to another where the 301 temperature and/or humidity is very different, water • Do not connect this unit to same electrical outlet that is droplets (condensation) may form inside the unit
ページ8に含まれる内容の要旨
RP101_e.book 8 ページ ２００７年４月４日 水曜日 午前１１時５０分 Important Notes Additional Precautions 551 • Please be aware that the contents of memory can be irretrievably lost as a result of a malfunction, or the improper operation of the unit. To protect yourself against the risk of loosing important data, we recommend that you periodically save a backup copy of important data you have stored in the unit’s memory in another MIDI device (e.g., a sequencer). 552 • Unfortunately, it may
ページ9に含まれる内容の要旨
RP101_e.book 9 ページ ２００７年４月４日 水曜日 午前１１時５０分 Contents USING THE UNIT SAFELY ............................. 4 Changing Various Settings .........................32 Tuning to Other Instruments’ Pitches (Master Tuning) ....32 Important Notes.......................................... 7 Lowering/Raising the Standard Pitch ....................32 Setting the Standard Pitch to 440.0 Hz .................32 Main Features........................................... 10 Setting the Standard Pitch
ページ10に含まれる内容の要旨
RP101_e.book 10 ページ ２００７年４月４日 水曜日 午前１１時５０分 Main Features Thank you, and congratulations on your choice of the Roland Digital Piano RP101. To ensure that you obtain the maximum enjoyment and take full advantage of the RP101’s functionality, please read this owner’s manual carefully. Piano Sounds with Rich Resonance and Wide Expressive Range • This instrument features a piano sound generator that utilizes stereo sampling, so it is capable of faithfully recreating the sound of a high-quality
ページ11に含まれる内容の要旨
RP101_e.book 11 ページ ２００７年４月４日 水曜日 午前１１時５０分 Panel Descriptions Control Panel Rear Panel 1 Phones Jacks 2 Pedal Connector 3 AC Inlet 1 Phones Jacks 3 AC Inlet You can connect headphones to these jacks (p. 13). Connect the supplied power cord here (p. 12). 2 Pedal Connector Connect the pedal cord to this connector (p. 12). Control Panel 4 [POWER] Switch Turns the power on/off (p. 14). 4 5 [VOLUME] Knob Adjusts the overall volume level (p. 14). 5 6 [TONE] Butt
ページ12に含まれる内容の要旨
RP101_e.book 12 ページ ２００７年４月４日 水曜日 午前１１時５０分 Before You Start Playing Connecting the Pedal Cord Setting Up the Music Rest 1. Connect the pedal cord to the Pedal connector on the 1. Insert the included music rest attachment screws into bottom panel of the RP101, at the rear. the screw holes on top of the RP101, and tighten the fig.00-01 screws slightly (in two places). fig.00-03 Connecting the Power Cord 2. Put the music rest between the screws and the 1. Insert
ページ13に含まれる内容の要旨
RP101_e.book 13 ページ ２００７年４月４日 水曜日 午前１１時５０分 Before You Start Playing ■ Using the Headphone Hook Connecting Headphones Whenever you are not using the headphones, you can hang The RP101 has two jacks for plugging in headphones. them on the headphone hook at the lower left of the RP101. This allows two people to listen through headphones Attaching the Headphone Hook simultaneously, making it very useful for lessons and when Press and twist the headphone hook included with the RP1
ページ14に含まれる内容の要旨
RP101_e.book 14 ページ ２００７年４月４日 水曜日 午前１１時５０分 Before You Start Playing Turning the Power On and Off Adjusting the Sound’s Volume 1. Turn the [VOLUME] knob to adjust the overall NOTE volume. Once the connections have been completed, turn on fig.00-07.e power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing The volume The volume decreases increases malfunction and/or damage to speakers and other devices. 1. To
ページ15に含まれる内容の要旨
RP101_e.book 15 ページ ２００７年４月４日 水曜日 午前１１時５０分 Before You Start Playing About the Adjuster If you feel that the pedal is unstable (for example if you’ve moved the RP101 to a different location), you can adjust the adjuster located on the bottom of the pedals as follows. • Turn the adjuster to lower it until the adjuster is in firm contact with the floor. The pedal may be damaged if there is a gap between the adjuster and the floor. In particular, when you’ve placed the RP101 on carpet, you
ページ16に含まれる内容の要旨
RP101_e.book 16 ページ ２００７年４月４日 水曜日 午前１１時５０分 Enjoying the Internal Songs The RP101 comes with 65 piano songs onboard. The songs are played back continuously in sequence. For more details, refer to fig.panel1-2 “Internal Song List” (p. 43). 1 4 6 9 11 13 16 18 21 23 25 57 59 61 64 When you play back an . . . . . . 2 3 5 7 8 10 12 14 15 17 19 20 22 24 26 58 60 62 63 65 internal song, the reverb effect C1 C2 C3 C6 will automatically be turned on The Song You Record (the button’s indica
ページ17に含まれる内容の要旨
RP101_e.book 17 ページ ２００７年４月４日 水曜日 午前１１時５０分 Performance Performing with a Variety of Sounds The RP101 contains 17 different internal tones. You can also select a tone by pressing the [TONE] button and a key to which a tone For more details, refer to “Tone List” (p. 42). is assigned. The “Grand Piano” tone is selected when the instrument is turned on. fig.panel2-1 1 A0 B0 C1 D1 E1 F1 G1 A1 B1 C2 2 1. Press the [TONE] button. You can also switch sounds by The button’s indicator w
ページ18に含まれる内容の要旨
RP101_e.book 18 ページ ２００７年４月４日 水曜日 午前１１時５０分 Performance Playing Two Sounds Together (Dual Play) Simultaneously playing two tones when one key is pressed is called “Dual play.” fig.panel2-5 1 A0 B0 C1 D1 E1 F1 G1 A1 B1 C2 You can also switch sounds by holding down the [TONE] 2 button and simultaneously pressing two keys to which sounds are assigned. 1. Press the [TONE] button. The button’s indicator will blink. 2. Simultaneously press a white key and black key to which tones are
ページ19に含まれる内容の要旨
RP101_e.book 19 ページ ２００７年４月４日 水曜日 午前１１時５０分 Performance ■ Adjusting the Volume Balance in Dual Play (Dual Balance) You can change the volume balance between the two layered sounds in Dual play. You can adjust the dual fig.panel2-2 balance in 9 steps. While holding down the [TONE] button... When using Dual play, the tones are handled as follows according to the combination of keys you pressed. White key and white key, or White key and black key black key and black key White key: To
ページ20に含まれる内容の要旨
RP101_e.book 20 ページ ２００７年４月４日 水曜日 午前１１時５０分 Performance Changing the Brightness of the Sound (Brilliance) You can adjust the brightness of the sound. You can use the Memory Backup function to store this setting in internal memory (p. 36). C4 D4 E4 F4 G4 A4 B4 A0 1. Hold down the [TONE] button and press one of the keys from “C4” to This is set to “0” when the “B4” to adjust the brightness of the sound. RP101 is shipped from the Key Pressed Setting Explanation factory. C4
