ページ1に含まれる内容の要旨
PicoScope 4000 Automotive
PC Oscilloscopes
User's Manual
ps4000a.en-1
© Copyright 2008 Pico Technology Ltd. All rights reserved.
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Contents I Contents 1 Introduction .....................................................................................................................................1 ...........................................................................................................................................1 1 Overview ...........................................................................................................................................1 2 Minimum PC requirements .........
ページ4に含まれる内容の要旨
ページ5に含まれる内容の要旨
Introduction 1 1 Introduction 1.1 Overview 9 The PicoScope 4000 Series Automotive Oscilloscopes are a range of high-speed PC 10 oscilloscopes for automotive diagnostic use. They are fully USB 2.0 -capable and 10 backwards-compatible with USB 1.1 . There is no need for an external power supply as power is supplied from the USB port, making these oscilloscopes highly portable. The PicoScope 4000 Series Automotive Oscilloscopes are supplied with the PicoScope 9 9 software , which turns your PC int
ページ6に含まれる内容の要旨
2 PicoScope 4000 Series Automotive Oscilloscope User's Manual 1.3 Installation instructions Important 9 You must install the PicoScope software before connecting 9 a PicoScope 4000 Series Automotive Oscilloscope to your PC for the first time. Install the software by following the steps in the quick start guide supplied with your oscilloscope. You can then connect your oscilloscope to the PC. To minimise the 10 risk of electromagnetic interference, please use the USB cable supplied. There is n
ページ7に含まれる内容の要旨
Introduction 3 1.4 Safety symbols Symbol 1: Warning Triangle This symbol indicates that a safety hazard exists on the indicated connections if you do not take correct precautions. Ensure that you read in detail all safety documentation associated with the product before using it. Symbol 2: Equipotential This symbol indicates that the outer shells of the indicated BNC connectors are all at the same potential (i.e. are shorted together). You must therefore take necessary precautions to avoid apply
ページ8に含まれる内容の要旨
4 PicoScope 4000 Series Automotive Oscilloscope User's Manual 1.6 FCC notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction man
ページ9に含まれる内容の要旨
Introduction 5 1.8 Legal information The material contained in this release is licensed, not sold. Pico Technology grants a licence to the person who installs this software, subject to the conditions listed below. Access The licensee agrees to allow access to this software only to persons who have been informed of these conditions and agree to abide by them. Usage The software in this release is for use only with Pico products or with data collected using Pico products. Copyright Pico Technology
ページ10に含まれる内容の要旨
6 PicoScope 4000 Series Automotive Oscilloscope User's Manual 1.9 Company details Address: Pico Technology James House Colmworth Business Park St. Neots Cambridgeshire PE19 8YP United Kingdom Phone: +44 (0) 1480 396 395 Fax: +44 (0) 1480 396 296 Email: Technical Support: support@picotech.com Sales: sales@picotech.com Web site: www.picoauto.com ps4000a.en © Copyright 2008 Pico Technology Ltd. All rights reserved.
ページ11に含まれる内容の要旨
Product information 7 2 Product information 2.1 Specifications PicoScope 4223 PicoScope 4423 10 Vertical Resolution 12 bits 9 Analog Bandwidth 20 MHz* Channels 2 4 9 Maximum Sampling Rate 80 MS/s 80 MS/s Single channel 80 MS/s 80 MS/s ** Two channels - 20 MS/s Three or four channels 9 Buffer Size 32M samples 32M samples One channel in use 16M samples 16M samples Two channels in use - 8M samples Three or four channels in use Inputs 2 x BNC input 4 x BNC input 1 MW impedance 1 MW impedance 22 pF 2
ページ12に含まれる内容の要旨
8 PicoScope 4000 Series Automotive Oscilloscope User's Manual 3 Advanced features 3.1 Sampling modes 9 PicoScope 4000 Series Automotive Oscilloscopes run in various sampling modes. At high sampling rates, the oscilloscope collects data much faster than a PC can read it. To compensate for this, the oscilloscope stores a block of data in an internal memory buffer, delaying transfer to the PC until the required number of data points have been 8 sampled. This is called block mode. At very low sampl
ページ13に含まれる内容の要旨
Glossary 9 4 Glossary AC/DC control. Each channel can be set to either AC coupling or DC coupling. With DC coupling, the voltage displayed on the screen is equal to the true voltage of the signal with respect to ground. With AC coupling, any DC component of the signal is filtered out, leaving only the variations in the signal (the AC component). Aliasing. Like all digital scopes, the PicoScope 4000 Series cannot reliably capture signals with a frequency higher than half the scope's maximum s
ページ14に含まれる内容の要旨
10 PicoScope 4000 Series Automotive Oscilloscope User's Manual USB 1.1. USB is the abbreviation for Universal Serial Bus. This is a standard port that enables you to connect external devices to PCs. A typical USB 1.1 port supports a data transfer rate of 12 Mbps (12 megabits per second), and is much faster than a serial port. USB 2.0. USB is the abbreviation for Universal Serial Bus. This is a standard port that enables you to connect external devices to PCs. A typical USB 2.0 port supports a
ページ15に含まれる内容の要旨
Index 11 Index P PC connection 7 PC Oscilloscope 1, 4, 9 A PC requirements 1 AC coupling 8 PicoScope 4000 Series Automotive 1 AC/DC control 9 PicoScope software 1, 2, 9 Accuracy 7 Power supply 7 Analog bandwidth 7, 9 R B Repair 3 Block mode 8, 9 Resolution, vertical 7, 8, 9 BNC connector 2 Buffer 8 S Buffer size 7, 9 Safety warning 4 Sampling rate 7, 9 C Signal generator 2 Calibration 3 Specifications 7 Channels 7, 8 Spectrum anal
ページ16に含まれる内容の要旨
ページ17に含まれる内容の要旨
13 © Copyright 2008 Pico Technology Ltd. All rights reserved. ps4000a.en
ページ18に含まれる内容の要旨
Pico Technology James House Colmworth Business Park Eaton Socon ST. NEOTS Cambridgeshire PE19 8YP United Kingdom Tel: +44 (0) 1480 396 395 Fax: +44 (0) 1480 396 296 Web: www.picotech.com ps4000a.en-1 28.10.08 © Copyright 2008 Pico Technology Ltd. All rights reserved.
