ページ1に含まれる内容の要旨
Fax Option Type 1027 Operating Instructions
Fax Option Type 1027 Operating Instructions
µ
Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 m // Pages in book=212 // Print scale=81%
Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 8.480000 mm
Fax Option Type 1027
Operating Instructions
Facsimile Reference (option)
Read this manual carefully before you use this product and keep it handy for future
Printed in Japan
reference.
UE USA B418-86
ページ2に含まれる内容の要旨
µ Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 m // Pages in book=212 // Print scale=81% Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 8.480000 mm Introduction This manual contains detailed instructions on the operation and maintenance of this machine. To get maximum versatility from this machine all operators should carefully read and follow the instructions in this manual. Please keep this manual in a handy place near the machine. Please read the Saf
ページ3に含まれる内容の要旨
RusC2FaxADEN-F_V4_FM.book Page 135 Monday, August 20, 2001 10:52 AM 8. Key Operator Setting Changing Key Operator Settings DDDD Select [Transmission Page Count]. Counters This function allows you to check the total number of pages transmitted and received on the display. Transmissions: Total number of transmitted pages Receptions: Total number of received pages The totals for the number of pages AAAA Press the {{{{User Tools/Counter}}}} key. transmitted and received are shown. Note ❒ If "
ページ4に含まれる内容の要旨
RusC2FaxADEN-F_V4_FM.book Page 136 Monday, August 20, 2001 10:52 AM Key Operator Setting Note Forwarding ❒ To use this function, select "ON" for the "Forwarding" function in Using this feature, you can select "Reception Mode".⇒ p.131 “Re- messages from Specified Senders to ception Mode” be printed on your machine, and then ❒ If you do not program the For- sent on to another fax machine. warding function when this func- This is useful if, for example, you are tion is set to on in "Reception v
ページ5に含まれる内容の要旨
RusC2FaxADEN-F_V4_FM.book Page 137 Monday, August 20, 2001 10:52 AM Changing Key Operator Settings EEEE Press [ON]. Programming Forwarding Stations AAAA Press the {{{{User Tools/Counter}}}} key. Note ❒ If there is a Forwarding Station already programmed, a receiver name is shown. If you want to BBBB Press [Facsimile Features]. change the receiver, press [Re- ceiver] and go to step . Facsimile Features menu is shown. F ❒ To cancel "Forwarding", press CCCC Select [Key Operator Tools]. [Cancel]
ページ6に含まれる内容の要旨
RusC2FaxADEN-F_V4_FM.book Page 138 Monday, August 20, 2001 10:52 AM Key Operator Setting EEEE Press [OFF]. Deleting a Forwarding Station AAAA Press the {{{{User Tools/Counter}}}} key. FFFF Press [OK]. GG Press the {{User Tools/Counter}} key. GG {{ }} The initial display is shown. BBBB Press [Facsimile Features]. Facsimile Features menu is shown. Forwarding Mark CCCC Select [Key Operator Tools]. You can print a Forwarding Mark on the receiver's messages which have been forwarded. The receiver
ページ7に含まれる内容の要旨
RusC2FaxADEN-F_V4_FM.book Page 139 Monday, August 20, 2001 10:52 AM Changing Key Operator Settings DDDD Select [Memory Lock RX]. Memory Lock When you switch Memory Lock on, received messages are stored in mem- ory and are not printed automatical- ly. When a message is received in the Memory Lock mode, the Confidential File indicator blinks. To print this message, enter the Memory Lock ID. A user without the ID cannot print the message. This prevents an unau- Note thorized person from seeing t
ページ8に含まれる内容の要旨
RusC2FaxADEN-F_V4_FM.book Page 140 Monday, August 20, 2001 10:52 AM Key Operator Setting DDDD Select [ECM]. ECM If a part of a transmission fails be- cause of a line problem, the lost data is automatically resent. For this fea- ture to work, the other machine must have ECM. You can chose whether ECM is turned on or off with the fol- lowing procedure. Limitation Note ❒ If you turn ECM off, you cannot ❒ If "ECM" is not shown, press [UUUU use the following features: Prev.] or [TT Next]. TT JB
ページ9に含まれる内容の要旨
RusC2FaxADEN-F_V4_FM.book Page 141 Monday, August 20, 2001 10:52 AM Changing Key Operator Settings Changing the User Parameters The User Parameters allow you to customize various settings to match your needs. To change the function settings, set the User Parameter switches. Preparation Access to some User Parameter Settings requires the installation of optional equipment or that other settings be made beforehand. - - - -Switches and Bits User Parameters are divided into switches and each swit
ページ10に含まれる内容の要旨
RusC2FaxADEN-F_V4_FM.book Page 142 Monday, August 20, 2001 10:52 AM Key Operator Setting Switch Bit Item 0 1 04 0 Automatic printing of the Off On Confidential File Report 7 Include a portion of the im- Off On age on the Transmission Result Report (Memory Transmission), Memory Storage Report, Communi- cation Failure Report, or Transfer Result Report (In- clusion of part of image) 05 0 Receive Service Call (SC) Possible Not possible Condition (Substitute Re- (Substitute RX) (Reception off
ページ11に含まれる内容の要旨
RusC2FaxADEN-F_V4_FM.book Page 143 Monday, August 20, 2001 10:52 AM Changing Key Operator Settings Switch Bit Item 0 1 14 0 Print documents received Immediate print- When turning on with Auto Power-On Recep- ing (Off) the Operation tion (Night Printing mode) switch (On) 1 Long Document Transmis- Off On sion (Well Log) 2 Batch Transmission Off On 3 Reset when function changed Off On 7System Parameter List TX Off On 17 2 Whether you need to press Not Necessary Necessary Add after entering a Q
ページ12に含まれる内容の要旨
RusC2FaxADEN-F_V4_FM.book Page 144 Monday, August 20, 2001 10:52 AM Key Operator Setting DDDD Select [Parameter Setting]. Changing the User Parameters Important ❒ We recommend that you print and keep the User Parameter list when you program or change a user pa- rameter. ⇒ p.145 “Printing the User Parameter list” ❒ Do not change any bit switches other than those shown on the pre- Note vious pages. ❒ If "Parameter Setting" is not AAAA Press the {{{{User Tools/Counter}}}} key. shown, press [UU P
ページ13に含まれる内容の要旨
RusC2FaxADEN-F_V4_FM.book Page 145 Monday, August 20, 2001 10:52 AM Changing Key Operator Settings GGGG Press [OK]. DDDD Press [Print List] just to the right side of [Parameter Setting]. To cancel these settings, press [Can- cel]. The display will return to step . E HHHH Repeat step and to change the EE FF EE FF Switch settings. IIII After all the settings are finished, press [Exit]. JJJJ Press the {{{{User Tools/Counter}}}} key. The initial display is shown. Note ❒ If "Parameter Setting" i
ページ14に含まれる内容の要旨
RusC2FaxADEN-F_V4_FM.book Page 146 Monday, August 20, 2001 10:52 AM Key Operator Setting ❖ ❖❖ ❖ Using a Full agreement Special Senders to Treat Destination to be Number of regis- Differently registered tered identifications (Own Name) By programming particular receivers NEW YORK 3 in advance, you can set the following BRANCH feature for each receiver. HONG KONG Use the Own Name or Own Fax BRANCH Number to program your receivers. If SYDNEY the receiver has the same machine BRANCH make, p
ページ15に含まれる内容の要旨
RusC2FaxADEN-F_V4_FM.book Page 147 Monday, August 20, 2001 10:52 AM Changing Key Operator Settings ❖ ❖❖ ❖ Forwarding Note Use this feature to print received ❒ You can program up to 24 charac- messages, and then transfer them ters for the sender. to receivers which are pro- ❒ You can check Own Name and Own grammed beforehand. Only faxes Fax Number with Journal. You can sent by programmed senders (Spe- check programmed Special Senders cial Senders) will be received. with specified sender list.
ページ16に含まれる内容の要旨
RusC2FaxADEN-F_V4_FM.book Page 148 Monday, August 20, 2001 10:52 AM Key Operator Setting ❖ ❖❖ ❖ Print 2 Sided For example, if blue paper is in tray 1 and white paper is in tray 2, Use this feature to print on both the machine prints the documents sides of the paper. from Special Senders on the blue Limitation paper and prints the documents ❒ Optional duplex unit is re- from other senders on the white quired for using this feature. paper, making it easy for you to discriminate between the two.
ページ17に含まれる内容の要旨
RusC2FaxADEN-F_V4_FM.book Page 149 Monday, August 20, 2001 10:52 AM Changing Key Operator Settings CCCC Select [Key Operator Tools]. GGGG Press [OK]. HHHHWhen programming the "Partial agreement" condition, press [Par- tial agreement]. DDDD Select [Program Special Sender]. Reference ⇒ Chapter 3, "Entering Text" in the Basic Features manual IIII Select the item you want to pro- gram. Note Note ❒ You must select only the item ❒ If "Program Special Sender" is you want to program. not shown, press
ページ18に含まれる内容の要旨
RusC2FaxADEN-F_V4_FM.book Page 150 Monday, August 20, 2001 10:52 AM Key Operator Setting CCCCEnter the print quantity with Forwarding the number keys. AAAA Press [Forwarding]. BBBB Select [ON] or [OFF]. If you select [OFF], go to step D. Note ❒ If you make a mistake, press the {{{{Clear/Stop}}}} key or [Clear] and try again. CCCC Specify an end receiver. DD Press [OK]. DD Print 2 Sided AA Press [Print 2 Sided]. AA BBBB Select [ON] or [OFF]. DDDD Press [OK]. If you select [ON], the name of 8 t
ページ19に含まれる内容の要旨
RusC2FaxADEN-F_V4_FM.book Page 151 Monday, August 20, 2001 10:52 AM Changing Key Operator Settings LLLL Press the {{{{User Tools/Counter}}}} key. RX Reverse Printing The initial display is shown. AAAA Press [RX Reverse Printing]. BBBB Select [ON] or [OFF]. Programming "Initial Set UP" of a Special Sender Use this function to program "Initial Set Up" of a Special Sender. You can also specify the Bypass Tray(option) Paper Size. AAAA Press the {{{{User Tools/Counter}}}} key. CCCC Press [OK]. Pa
ページ20に含まれる内容の要旨
RusC2FaxADEN-F_V4_FM.book Page 152 Monday, August 20, 2001 10:52 AM Key Operator Setting DDDD Select [Program Special Sender]. Programming "Authorized RX" and "Special RX Function" AA Select [ON] or [OFF]. AA The illustration shows the "Au- thorized RX" display as a sample. Note ❒ If "Program Special Sender" is not shown, press [UU Prev.] or [TT UU TT Next]. EEEE Press [Initial Set Up]. BBBB Press [OK]. Programming "Bypass Tray Paper Size" AA Select [Auto detect], [Standard Size] AA or [Cus
