ページ1に含まれる内容の要旨
AKPro system with ATH1
transport shown
Planar Model A480-PL
Professional Grade
Home Cinema Conversion Lens System
USER MANUAL AND INSTALLATION GUIDE
Including the UH480 Lens, ATH1 Transport
and AKPro Projector Attachment Kits
As of February, 2009
Introduction, Basic projection parameters 2
Using the AKPro Attachment Kit 2
Important ceiling mount location considerations 3
Package Contents 4
Attachment Plate Diagram 6
Connecting the AK
ページ2に含まれる内容の要旨
INTRODUCTION Thank you for purchasing the Planar A480-PL lens system – the world’s leading model anamorphic lens system designed to dramatically enhance today’s high performance 16:9 projectors when showing the true widescreen aspect ratio of most major motion pictures. The A480-PL lens system includes the UH480 Lens and ATH1 automated transport to provide the optimum performance when viewing all wide screen content. The ATH1 transport can be mounted to your ceiling, to an improvised
ページ3に含まれる内容の要旨
USING the AKPro ATTACHMENT KIT The AKPro includes a high performance, rigid, solid steel plate specifically designed to attach to a properly installed ceiling mount head made by Chief Manufacturing (for use with the PD8130/8150) or Premier (for use with the PD8130/8150 and Viper), which may then be further installed to the ceiling using a variety of standard Chief or Premier mounting components. These components are not included in the kit but are available. The ceiling mounts and
ページ4に含まれる内容の要旨
PACKAGE CONTENTS AKPro attachment plate, AKPro attachment bag (hardware, spacers), plate hook bag (chain, hooks, hardware) Transport, transport mounting hardware, lens bracket mounting hardware, power supply, Panamorph remote, batteries Planar A480-PL User Manual and Installation Guide, Version 2.3, copyright 2009, all rights reserved, Planar Inc. Page 4
ページ5に含まれる内容の要旨
Panamorph lens and mounting bracket Chief RPA ceiling mount (PD81xx use only) Planar A480-PL User Manual and Installation Guide, Version 2.3, copyright 2009, all rights reserved, Planar Inc. Page 5
ページ6に含まれる内容の要旨
Top View (this side towards ceiling) Front H 7 13 11 3 11 6 6 15 Ceiling side of 1 13 Attachment Plate H H 8130/8150 8130/8150 7170 7170 8130/8150 8130/8150 7170 7170 Rear Planar A480-PL User Manual and Installation Guide, Version 2.3, copyright 2009, all rights reserved, Planar Inc. Page 6
ページ7に含まれる内容の要旨
PD8130/PD8150 installation instructions CONNECTING THE AKPro ATTACHMENT PLATE (Chief RPA mount and Phillips screwdrivers required) 1. Position the projector bottom-up on a soft surface. Consult the Attachment Plate Diagram for plate orientation, mounting hole locations and required screws and spacers for the PD8130 or PD8150. Insert and tighten each M4x30 screw through an appropriate silver washer and lock washer, the designated holes in the Attachment Plate, then through the 5/8”
ページ8に含まれる内容の要旨
MOUNTING THE ATH1 TRANSPORT 1. DO NOT CONNECT POWER TO THE TRANSPORT AT THIS TIME. ATH1/M380 Attachment Bag Contents 2. Position the flat side of the motorized transport against the bottom Pivot screw as #10-32x5/8” screw (1) assembled side of the Attachment Plate so that the transport logo is toward the screen and #10-32 nut (1) the center “M” hole in the Attachment Attachment #10-32 lock washer (1) Plate Plate is aligned with the front recessed transport hole. Insert t
ページ9に含まれる内容の要旨
Planar A480-PL User Manual and Installation Guide, Version 2.3, copyright 2009, all rights reserved, Planar Inc. Page 9
ページ10に含まれる内容の要旨
If the lens must be removed for any length of time it is recommended that a similar weight be suspended from the front of the attachment kit to balance the weight of the projector. This will minimize unusual stresses on the ceiling mount system. Proceed to “Final Adjustments” later on in this manual. Planar A480-PL User Manual and Installation Guide, Version 2.3, copyright 2009, all rights reserved, Planar Inc. Page 10
ページ11に含まれる内容の要旨
Viper (PD7170) installation instructions CONNECTING THE AKPro ATTACHMENT PLATE AND CEILING MOUNT (Planar/Premier PDS mount P/N 997-5351-00 and Phillips screwdrivers required) 1. Position the projector bottom-up on a soft surface. Consult the Attachment Plate Diagram for plate orientation, mounting hole locations and required screws and spacers for the Viper. Align the bottom part of the Planar/Premier PDS mount with the attachment plate holes and insert and tighten each M4x30 scre
ページ12に含まれる内容の要旨
VIPER (PD7170) ATTACHMENT SECURITY HOOK ATTACHMENT (Phillips screwdrivers, pliers, scissors and appropriate ceiling hooks required) Plate Hook Bag Contents (AK6 only) #8-32 Wire Hook (2) #8-32 Nut (4) Ceiling side #8 Washer (4) M4 Lock Washer (2) Plate Hook 3/16” Chain (6 feet) Chain End (4) as assembled to Attachment Plate Ceiling Mount Attachment 1. Install the Plate Hook Assemblies in the two “H” Screws adapter holes of the Attachment Plate (see diagram) with th
ページ13に含まれる内容の要旨
MOUNTING THE ATH1 TRANSPORT 1. DO NOT CONNECT POWER TO THE TRANSPORT AT THIS TIME. ATH1/M380 Attachment Bag Contents 2. Position the flat side of the motorized transport against the bottom Pivot screw as #10-32x5/8” screw (1) side of the Attachment Plate so that the assembled transport logo is toward the screen and #10-32 nut (1) the center “M” hole in the Attachment Attachment #10-32 lock washer (1) Plate Plate is aligned with the front recessed transport hole. Insert the
ページ14に含まれる内容の要旨
ATTACHING THE PROJECTOR TO THE CEILING MOUNT Follow the instructions included in the PDS mount to securely attach it to the ceiling Attach the projector to the ceiling mounted portion of the PDS mount Planar A480-PL User Manual and Installation Guide, Version 2.3, copyright 2009, all rights reserved, Planar Inc. Page 14
ページ15に含まれる内容の要旨
Planar A480-PL User Manual and Installation Guide, Version 2.3, copyright 2009, all rights reserved, Planar Inc. Page 15
ページ16に含まれる内容の要旨
FINAL ADJUSTMENTS (ALL INSTALLATIONS) 1. Turn the projector on with the UH480 Lens out of the projector beam. Set the horizontal lens shift to neutral (if a feature of your projector) and then adjust the ceiling mount so that the 16:9 image is in the exact center of and square to the screen, with a similar amount of image slightly over the top and bottom screen borders. If the projector lens is not in the exact horizontal center of the screen you may need to use a little horizontal lens
ページ17に含まれる内容の要旨
Programming Connect the included power adapter to the power input and connect a 3.5mm mini jack to 3.5mm mini jack cord that is long enough to reach from the Panamorph transport motor to the rear of the Planar projector (not included) to the “+12V Trigger In” on the Panamorph transport motor Plug the other end of the 3.5mm mini jack into one of the two 12V triggers located on the rear panel of the projector. With the lens in the “out” position, bring up the projector m
ページ18に含まれる内容の要旨
Now when the aspect on the projectors aspect ratio is changed to “Letterbox”, the 12V trigger will activate and the Panamorph lens transport will position the Panamorph lens in front of the projectors primary lens. Planar A480-PL User Manual and Installation Guide, Version 2.3, copyright 2009, all rights reserved, Planar Inc. Page 18
ページ19に含まれる内容の要旨
Aspect Ratio Matrix Native Source Projector Aspect and Resulting Aspect Aspect 12V trigger Setting with on Screen Panamorph Lens 16:9 4:3 16:9 16:9 letterbox Letterbox 2.35:1 4:3 4:3 Narrow 4:3 You can program the projector control the lens and screen mask for one resize mode, such as 16:9 letterbox to 2.35:1, or leave the Panmorph lens in front of the lens all the time and adjust the aspect raito per source type. CLEANING In most applications lenses do not need very much
