Garmin n�vi 250の取扱説明書

デバイスGarmin n�vi 250の取扱説明書

デバイス: Garmin n�vi 250
カテゴリ: 魚群探知機
メーカー: Garmin
サイズ: 1.19 MB
追加した日付: 8/1/2013
ページ数: 40
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスGarmin n�vi 250の取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、Garmin n�vi 250に関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書Garmin n�vi 250をこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書Garmin n�vi 250のフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - Garmin n�vi 250の説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
Garmin n�vi 250 取扱説明書 - Online PDF
Advertisement
« Page 1 of 40 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書Garmin n�vi 250を全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書Garmin n�vi 250の内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨

Fishfi nder 250/250C
high-resolution sonar
owner’s manual
(Fishfi nder 250C shown)
250C Cover.indd 1 1/27/2004, 2:37:44 PM

ページ2に含まれる内容の要旨

© Copyright 2004 Garmin Ltd. or its subsidiaries Garmin International, Inc. st 1200 East 151 Street, Olathe, KS 66062, U.S.A. Tel. 913/397.8200 or 800/800.1020 Fax 913/397.8282 Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey SO51 9DL, U.K. Tel. 44/1794.519944 Fax 44/1794.519222 Garmin Corporation nd No. 68, Jangshu 2 Road, Shijr, Taipei County, Taiwan Tel. 886/2.2642.9199 Fax 886/2.2642.9099 All Rights Reserved. Except as expressly provided herein, no p

ページ3に含まれる内容の要旨

Preface Introduction Thank you for choosing the Garmin Fishfi nder 250/250C. This product is designed for easy operation and to provide years of reliable service. Operations for the Fishfi nder 250 and Fishfi nder 250C are the same unless othewise noted. To ensure Preface and that you get the most from the Fishfi nder 250/250C, please take the time to read this Owner’s Manual and Registration learn the operation of your new unit. This manual is broken down into three sections. Section One covers t

ページ4に含まれる内容の要旨

LIMITED WARRANTY Introduction This Garmin product is warranted to be free from defects in materials or workmanship for one year from the date of purchase. Within this period, Garmin will at its sole option, repair or replace any components that fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts or labor, provided that the customer shall be responsible for any transportation cost. This warranty does not Warranty and cover failures due to abuse

ページ5に含まれる内容の要旨

Software License Agreement Introduction BY USING THE FISHFINDER 250/250C, YOU AGREE TO BE BOUND BY THE TERMS AND CONDI- TIONS OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT CAREFULLY. Software License Agreement Garmin grants you a limited license to use the software embedded in this device (the “Software”) in binary executable form in the normal operation of the product. Title, ownership rights and intellectual property rights in and to the Software remain in Garmin.

ページ6に含まれる内容の要旨

Introduction Before installing and getting started with your unit, please check to see that your package includes the following items. The package part number can be found on the outside of the box. If any parts are missing, please contact your Garmin dealer immediately. Packing List Fishfi nder 250 Standard Package (010-00343-00 w/o transducer): • Fishfi nder 250 Unit • Swivel Mount Bracket and Knobs • Power/Data Cable • Owner’s Manual • Self-Adhesive Quick Reference Guide • Protective

ページ7に含まれる内容の要旨

Transducers Introduction The transducer acts as the eyes and ears of your sonar, transmitting sound waves toward the bottom in a cone shape. Proper transducer selection and installation are important to the operation of your unit. It is best to select a transducer that suits the depth of the water that you are on. Selecting a Transducer A wide cone angle transducer works best in shallower water, providing a large coverage or viewing area, but at a decreased bottom resolution. In deep water t

ページ8に含まれる内容の要旨

Simulator . . . . . . . . . . . . . . . . . . . . . . . . .20 Depth Line . . . . . . . . . . . . . . . . . . . . . . . .14 Introduction NMEA Input/Output . . . . . . . . . . . . . . . .20 Noise Reject . . . . . . . . . . . . . . . . . . . . . . .14 Factory Settings . . . . . . . . . . . . . . . . . . . .20 Scroll . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Software Version . . . . . . . . . . . . . . . . . . . .20 Size Split . . . . . . . . . . . . . . . . . . . . . . . . .

ページ9に含まれる内容の要旨

Installing the Fishfi nder 250/250C Installation The Fishfi nder 250/250C must be properly installed according to the following instructions to get the best possible performance. To complete the installation, you’ll need the appropriate fasteners and tools. Verify that all cables can reach the unit mounting location and also take time to read through these instruc- Unit Installation tions prior to installation. Be sure to always wear safety goggles and a dust mask when drilling, cutting or sa

ページ10に含まれる内容の要旨

To swivel mount the Fishfi nder 250/250C display: Installation Tools (not included) — Drill, Screwdriver (Phillips or Standard), three #8 (4mm) pan head machine bolts with matching nuts and washers and a 5/32” (5mm) drill bit, OR three #8 pan head self-tapping screws and an appropriately-sized drill bit for drilling starter holes. Unit Installation 1. Using the swivel base as a template, mark the location of the three holes that are used to secure the bracket to the mounting surface. 2. If s

ページ11に含まれる内容の要旨

Installing the Unit on the Mounting Bracket Installation 1. Align the slot on the back of the unit with the long mounting knob and slide in place. It may be neces- sary to adjust the long mounting knob to spread the bracket arms apart. (Turn counter-clockwise to widen the bracket arms, clockwise to tighten.) Unit Installation 2. Adjust the unit angle and tighten the long mounting knob until snug. 3. To tilt the unit, loosen the long mounting knob on the right side of the bracket assembly.

ページ12に含まれる内容の要旨

Flush Mounting the Fishfi nder 250/250C Unit Installation The Fishfi nder 250/250C can be fl ush mounted on a fl at panel. When fl ush mounting the Fishfi nder 250/250C, be sure to choose an appropriately sized location for the unit. Check that all cables reach the unit mounting location before beginning installation. Use the Flush Mount Template provided in the box to Unit Installation determine a location. Always wear safety goggles and a dust mask when drilling, cutting or sanding. To fl ush moun

ページ13に含まれる内容の要旨

Black Wire Red Wire Connecting the Power/Data Cable Installation The power/data cable connects the Fishfi nder 250/250C to a 10-35 volt DC system and provides interface capabilities for connecting external devices. The color code in the diagram (pg. 6) indicates the appropriate harness connections. If it is necessary to extend the power/data wires, use a wire of comparable Wiring and Interfacing size and keep your extension as short as possible. To 10-35 Volt Boat Supply The unit can be wired

ページ14に含まれる内容の要旨

ToTransducer Installation (TX COM 2) DC Positive (red)+10-35VDC (RX COM 2) Wiring and Interfacing (TX COM 1) (RX COM 1) Power 10-35volts (black)-Ground(Power/Data) ToUnit (blue) Port1DataOUT (brown)Port1DataIN RXD+ GPS/NMEA Device (white)Port2DataIN(N/C) TXD+ You can download a copy of Garmin's proprietary (green)Port2DataOUT andRXD- communication protocol document from the Support section of our web site at www.garmin.com. (yellow)AlarmLow NMEADevice Note: During a typical installation, only

ページ15に含まれる内容の要旨

Installing the Transducer Installation Proper transducer installation is key to getting the best performance from your new unit. If the trans- ducer lead is too short, extension cables are available from your Garmin dealer. Coil and secure any excess cable. DO NOT cut the transducer lead or any part of the transducer cable, as this will void your warranty. Mounting the T ransducer The cable cannot be spliced and connected to any existing (Garmin or non-Garmin) transducer cables. Following are

ページ16に含まれる内容の要旨

Shoot-Thru-Hull Installation Installation To avoid drilling a hole to mount a thru-hull transducer, a transducer may be secured with epoxy inside a boat (“shoot-thru-hull” installation). This type of installation can provide better noise reduction and allow you to use a higher gain setting. For a transducer to be mounted inside the hull (shoot-thru, not thru-hull), Mounting the Transducer the boat must be fi berglass, with no core. Contact your boat manufacturer if you are unsure. Profession

ページ17に含まれる内容の要旨

Testing the Installation Installation While it is possible to perform some checks with the boat trailered, the boat should be in the water to properly test the sonar portion of the installation. Press the POWER/BACKLIGHT key (see pg. 10) and the Fishfi nder 250/250C should power on. If the Testing the Installation unit fails to power on, verify that the wiring adapter is seated properly in the back of the unit, the Red and Black wires are connected to the correct polarity, and that the 2-Am

ページ18に含まれる内容の要旨

Using the Keypad Unit Operation The keypad contains the following keys: Keypad Usage ARROW Keys— used to select (highlight) menu options and enter data. Also control movement of the cursor when paused in Pointer mode. Allow direct control of Sonar Page Adjustments. ENTER Key— selects a highlighted menu option. When entering data, allows you to initiate entry and then accept the selected value(s). When paused in Pointer mode, press to create a waypoint at the Pointer position (if interfaced w

ページ19に含まれる内容の要旨

Sonar Page Unit Operation The Sonar Page is where your Fishfi nder 250/250C becomes a powerful fi shfi nder/fl asher. If the unit does not detect a transducer, a “Sonar Turned Off” message is displayed on the Sonar Page. If in Simulator mode, a “Running Simulator” message is displayed. Understanding the Display The currently selected Adjustment option (see pg. 12) is displayed in the top left of the screen. Directly below the Adjustment option, the screen displays numeric data such as Depth, Wat

ページ20に含まれる内容の要旨

Using the Adjustment Menu Unit Operation The Adjustment Menu allows direct access to the settings and features most commonly used on the Sonar Page. There are 10 main adjustment options available: Range, Zoom, View, Gain, Target Level, Whiteline, Frequency, Depth Line, Noise Reject, and Scroll. All adjustments may be made by using the Adjustment Menu Options ARROW keys and ENTER key. The currently selected option will appear in the upper left of the display with an up and down arrow on each


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 Garmin 16" x 取扱説明書 魚群探知機 13
2 Garmin 160 取扱説明書 魚群探知機 435
3 Garmin 160 BLUE 取扱説明書 魚群探知機 178
4 Garmin 140 取扱説明書 魚群探知機 144
5 Garmin 240 取扱説明書 魚群探知機 132
6 Garmin 150 取扱説明書 魚群探知機 67
7 Garmin 190-00864-01 取扱説明書 魚群探知機 1
8 Garmin 250C 取扱説明書 魚群探知機 239
9 Garmin 340c 取扱説明書 魚群探知機 112
10 Garmin 400 取扱説明書 魚群探知機 5
11 Garmin 160C 取扱説明書 魚群探知機 640
12 Garmin 550C 取扱説明書 魚群探知機 6
13 Garmin 500 取扱説明書 魚群探知機 11
14 Garmin 400C 取扱説明書 魚群探知機 34
15 Garmin BLUECHART G2 取扱説明書 魚群探知機 16
16 Samsung HP-P5091 取扱説明書 魚群探知機 6
17 Samsung VP-D451 取扱説明書 魚群探知機 33
18 Samsung SP-R4232 取扱説明書 魚群探知機 4
19 Alpine Type-R SWR-M100 取扱説明書 魚群探知機 3
20 Audiovox Aca200w 取扱説明書 魚群探知機 1