ページ1に含まれる内容の要旨
®
AOM701
7” FLAT PANEL COLOR OBSERVATION
MONITOR OWNER'S MANUAL
A
– +
B
AOM701 Features:
– 7” High Performance Color LCD Monitor
– Built-in Audio Speaker with Volume Control
and 12V Trigger
–2 Camera (A/V) Input with A/B Select Control
– Backlit Controls and Day/Night Picture Modes
for Nighttime Use
– Auto/Manual Power On
– Sun Visor Included
Visit us at http://www.asaelectronics.com
Patent Pending
10R-020499
UDIOVOX PECIALIZED PPLICATIONS, L.L.C.
ページ2に含まれる内容の要旨
Important! – Please Read This Manual Before Installing! Congratulations on your purchase of a Voyager AOM701 LCD Observation Monitor. With proper installation and use, your AOM701 is designed to provide you with years of trouble-free operation. This manual contains important information required to properly install and operate the unit. Please read this manual thoroughly before beginning. All Voyager Observation products are strictly intended to be installed as a supplement aid to standard r
ページ3に含まれる内容の要旨
AV1 AV2 PACKING CONTENTS: 90 DAY/ 12 MONTH LIMITED WARRANTY WARRANTY CARD LCD MONITOR SUN SHIELD QTY. 1 QTY. 1 QTY. 1 #10 X 5/16” PHP THREAD FORMING BLACK SCREW 5’ INTERMEDIATE HARNESS (HARDWARE BAG) QTY. 1 QTY. 4 POWER HARNESS QTY. 1 1 • 1 • • • • 2 • 2 • • • • 3 • 3 • • • • 4 • 4 • • • • STOP STOP DISTANCE MARKER CONNECTION CABLE STICKER QTY.1 QTY.1 4” BLACK WIRE TIE QTY. 4 3 ACC (+12V) TRIGGER (+12V) AUDIO GND TRIGGER (+12V) STANDBY
ページ4に含まれる内容の要旨
CONTROLS AND OPERATION A + – B 1 2 3 4 5 1. Power/Stand-By Button The Power / Stand-by Button has two possible operations modes. a. Manual mode - Turned on manual by the user by pressing the Power #1 button. b. Stand-by mode - Turned on by a stand by trigger wire generally connected to the vehicles 12V reverse backup lights. Manual Mode wiring - For manual mode operation, the AOM701 should be wired as follows: ACC (+12V) Red wire should be connected to the vehicles accessory feed. GND - groun
ページ5に含まれる内容の要旨
A B 2. A/B Input Select Button This control toggles the active display image back and forth between AV1 and AV2 inputs. AV1 is the default source for the Blue Standby trigger wire. 3. Day/Night Mode Button This control toggles the unit between “Day” and “Night” LCD illumination modes. In the “Day” mode, the LCD backlight intensity is at maximum. In “Night” mode, the LCD backlight is dimmed to a preset level that is more suitable for low light operation. 4. Picture Adjustment Menu Butt
ページ6に含まれる内容の要旨
INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN INSTALLATION: Before drilling, be sure that no cable or wiring is on the other side. Clamp all wires securely to reduce the possibility of them being damaged during installation and use. Keep all cables away from hot or moving parts, and electrically noisy components. Wiring Definitions: ¡ Power connection: Pin 1 ACC +12V (Red) Pin 2 Standby Trigger (Blue wire) Pin 3 Ground (Black wire) Pin 4 Audio Trigger (White wire) ¡ Camera A input: Connection f
ページ7に含まれる内容の要旨
5. There are 2 options for connecting the LCD monitor to the connection cable. If the application is such that the monitor is in close proximity to the connection cable, the AOM701 monitor can be connected directly to the connection cable. If the connection cable is mounted further from the monitor, use the 5’ intermediate cable included with the AOM701 to connect the monitor to the connection cable. If more cable length is needed, additional 5’ lengths of the intermediate cable can be pur
ページ8に含まれる内容の要旨
1A 8 V TYPICAL SYSTEM CONNECTION ACCESSORY ITEMS (optional cable lengths available, contact customer service for specifics) AOM701 LCD MONITOR A – – + + B (BLUE) +12V STANDBY TRIGGER (RED) +12V SWITCHED (WHITE) AUDIO TRIGGER (BLACK) CHASSIS GROUND CONNECTION CABLE 5’ INTERMEDIATE CABLE AV2 TRIGGER (+12V) STANDBY GND TRIGGER (+12V) AUDIO ACC (+12V)
ページ9に含まれる内容の要旨
REAR OBSERVATION INSTALLATION DISTANCE MARKER USE/INSTALLATION - PLACE INDICATOR MARKERS (CONE, BOX ANY REFERENCE OBJECT HANDY) BEHIND VEHICLE AS IN FIGURE A. - PLACE RANGE MARKER DECALS ON SCREEN OF MONITOR OVER IMAGE OF INDICATOR MARKERS ON GROUND BEHIND VEHICLE, AS VIEWED ON THE MONITOR SCREEN. - THIS GIVES YOU A VISUAL REFERENCE OF ACTUAL DISTANCE BEHIND VEHICLE, AS OBJECTS ARE VIEWED. INDICATOR MARKERS 1FT 2FT 5FT WIDTH OF VEHICLE FIGURE A A – + B FIGURE B 9
ページ10に含まれる内容の要旨
® PANAVISE MOUNT TEMPLATE (OPTIONAL ACCESSORY) 0.25 2.00 0.25 2.50 2.00 0.25 2.50 10
ページ11に含まれる内容の要旨
TROUBLESHOOTING SYMPTOM CAUSE SOLUTION No power No +12V accessory, No Replace circuit fuse, monitor has protection ground, mis-wired/reversed device built-in/reset, check ground connection, verify power is being supplied Video/No audio White audio trigger wire Connect to +12V ACC or reverse light circuit, not powered, Volume adjust turn volume adjustment up down Monitor does not Blue standby wire not powered Connect to reverse circuit +12V activate in Standby reverse trigger Negative/dark Low vo
ページ12に含まれる内容の要旨
PRODUCT SPECIFICATIONS LCD panel specifications: Size/Type 7” (diagonal) /TFT LCD Brightness 350 nit (min) 420 nit (typ.) Contrast Ratio 200 (min) 300 (typ.) View Angles Top (12 o’clock): 30°(min) (@ CR³10) Bottom (6 o’clock): 50°(min) Horizontal: ±50° (min) Response Time Rise: 12ms (typ.) ; 50ms (max) Fall: 18ms (typ.) ; 60ms (max) Back light Type CCFL Back light Life 30k hrs (min) ; 40k hrs (typ.) Operation Temperature Range:-20°C to 65°C Storage Temperature Range:
