ページ1に含まれる内容の要旨
®
HDTV LCD Projection Television
Téléviseur à projection ACL à haute définition
About Your Manual
The instructions included with this TV are for your model of the Epson Livingstation, as well
as the other models listed on the cover of the manual.
The instructions refer to an external tuner, which is not included with the LS47P2C or
LS57P2C. Otherwise, they are correct for your TV and describe how to operate it fully.
À propos de votre manuel
La documentation ci-jointe s’applique à votre modèle
ページ2に含まれる内容の要旨
® HDTV LCD Projection Television About Your Manual The manual and setup sheet included in this package are for the following television models: LS47P2 LS57P2 LS47P1D LS57P1D Although your model number may not appear on the cover of the manual, the instructions are correct for your TV and describe how to operate it fully. CPD-18635 Printed in USA
ページ3に含まれる内容の要旨
® HDTV LCD Projection Television Selecting a Channel Follow these steps to select a channel from the Electronic Program Guide (EPG): 1 Make sure you are tuned to a digital (High Definition) channel; your tuner does not support the EPG for non-digital channels. Note If you see a message that the EPG is not supported, press the up or down arrow button on your tuner’s remote control to switch to a digital channel. 2 Press the EPG button on the tuner’s remote control twice. You see the Channel Gu
ページ4に含まれる内容の要旨
® HDTV LCD Projection Television Installing and Maintaining the Optional Front Air Filter ® ® Follow these instructions to install and maintain the optional front air filter for your Epson LivingStation television. This filter is intended for customers who live in dry, dusty areas to reduce the amount of dust that enters the TV. Caution Once the new air filter has been installed, you need to clean it periodically as described on the next page. Failure to clean the filter may cause the TV to
ページ5に含まれる内容の要旨
3 Align the slot in the filter with the tab on the TV. Press the filter in place over the air intake vent. Align slot with tab on air intake vent 4 Press down on the filter to make sure the adhesive is secure. Make sure adhesive is secure 5 Replace the speaker cover. Cleaning the Air Filter Once the air filter is installed, you need to inspect it regularly. If the filter appears to be dirty, clean it as described below. Note Whenever you inpect the front air filter, you should also check the
