ページ1に含まれる内容の要旨
NOTES:
For good performance and safety, we recommend re-torquing all clamps and fasteners to the proper specifications after the first 500
miles and every 5000 miles thereafter.
Carrying high loads over rough roads with excess speed may damage the system on your truck. Exercise good judgement at all times.
Please call us with questions or concerns: 800.501.1587 or email: info@tracrac.com
Installation Manual
Trac Rac, Inc.
994 Jefferson Street • Fall River, MA 02721
800.501.1587
www.tracrac
ページ2に含まれる内容の要旨
Contractor Rac Pro Table 7. Upright Part Reference 4 Item Installation Notes: 5 No. Qty. Part No. Description • Contractor Rac Pro mounts onto the side rails of your truck without drilling. 3 1 1 PI-11009 Cleat • Installation is straight forward, and should take approximately 45 minutes to complete. 2 2 HD-80136 Bolt 1/4-20X1.75” 1. Verify that you have received the correct parts using the assembly drawing and packing list. 2 3 1 FX-11139 Nut Bar 4 1 PI-23327 Spacer, Cantilever 6 Figure 1. Con
ページ3に含まれる内容の要旨
3. A fter selecting the correct hole pattern for your truck FRONT (using Figure 3), plug up all other holes using the black plastic rivets. Large rivet–on the top, small rivet–on DODGE FORD F150 the bottom (Figure 4). LH CHEVY RH Table 3. Plastic Rivets TOYOTA TUNDRA Item No. Qty. Part No. Description GMC 1 15 PI-23328 Rivet, Small, Ratchet, Black 1 2 BRACKET FORD F250/350 2 15 PI-23329 Rivet, Large, Ratchet, Black ASSMEBLY 2 BRACKET ASSMEBLY 3 4. A ttach rubber block assembly and rubber shi
ページ4に含まれる内容の要旨
5. Insert the rubber block into the stake pocket opening and tighten up the bolt EQUAL DISTANCE EQUAL DISTANCE using 5/16 Allen Wrench. Torque to 90-110 in-lbs. 6. Slide one clamp into the base of each upright. Position as shown and secure using socket head cap bolt and U-channel. Tighten up the bolt using 5/16 Allen Wrench. Torque to 130-150 in- lbs. SADDLE LOCK NUT, M10X1.5 SADDLE P/N HD-23179 7A. B uild two standard crossbar assemblies. Assemble two tie downs–items 1, 2 15MM SOCKET and
