Harbor Freight Tools 3029の取扱説明書

ページ1に含まれる内容の要旨

OFF ROAD TRUCK LIGHT SYSTEM
Model 03029
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http//www.harborfreight.com
© ®
Copyright 2003 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
SAVE THIS INSTRUCTION MANUAL
You will need this Instruction Manual for the safety wa

ページ2に含まれる内容の要旨

UNPACKING When unpacking, check to make sure all the parts shown are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. ASSEMBLY INSTRUCTIONS 1. To avoid accidental short circuits, disconnect the negative (-) terminal of the vehicle battery prior to assembling the Off Road Truck Light System. 2. NOTE: The Halogen Lamps may be mounted above or below the front bumper. Make sure the desired mounting

ページ3に含まれる内容の要旨

LIGHT SWITCH FUSE BLACK 4 (20 AMP) GROUND BLUE 2 WIRE POWER (HOT) 1 WIRE TO FUSE BOX OR 12 FT. RED EXTENSION WIRE (+) BATTERY PASSENGER SIDE DRIVER SIDE TERMINAL BLACK GROUND “Y” WIRES CONNECTOR FIGURE B 4 FT. RED EXTENSION WIRE INSPECTION AND MAINTENANCE 1. WARNING! Always unplug the Off Road Truck Light System from its 12 Volt DC power source and allow the unit to completely cool down before performing any inspection or maintenance. 2. BEFORE EACH USE, inspect the general condition of the Off