私たちの目的は、皆様方にデバイスLG Electronics 15LC1Rの取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、LG Electronics 15LC1Rに関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。
説明書LG Electronics 15LC1Rをこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります：
Internet Home Page : http://www.lge.com
ENERGYSATR is a set of power-saving
Please read this manual carefully before operating
guidelines issued by the U.S.
Environmental Protection Agency(EPA).
Retain it for future reference.
As an ENERGY STAR
Record model number and serial number of the set.
Partner LGE U. S. A.,Inc.
See the label attached on the back cover and quote
has determined that this
this information to yo
Warning Warning Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Th
Owner's Manual Safety Instructions Safety Instructions Safety Instructions WARNING : To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or Moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifi
Safety Instructions Safety Instructions continued Safety Instructions continued 12. Use only with a cart, stand, tripod, bracket, or 14. Refer all servicing to qualified service per- table specified by the manufacturer, or sold sonnel. Servicing is required when the with the apparatus. When a cart is used, use apparatus has been damaged in any way, caution when moving the cart / apparatus such as power supply cord or plug is dam- combination to avoid injury from tip-over. aged, liquid has been s
Contents Contents Contents Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Sound Menu Options Safety Instructions . . . . . . . . . . . . . . . . . . .3~4 EZ Audio . . . . . . . . . . . . . . . . . . . . . .21 Equalizer Adjustments . . . . . . . . . . . .21 Introduction AVL (Auto Volume Leveler) . . . . . . . .21 Controls . . . . . . . . . . . . . . . . . . . . . . .6 Sound Balance . . . . . . . . . . . . . . . . .22 Connection Options . . . . . . . . . . . . . . .7 Stereo/SAP
Introduction Introduction Introduction Controls Controls CH VOL ENTER MENU INPUT /I On/Off Button Enter Input Button Volume Button Channel Buttons Menu Buttons Button Remote Control Sensor Power/Standby Indicator Glows amber in Standby mode, Glows blue when the TV is turned on. 6
Introduction Connection Options Connection Options ANTENNA 15LC1R PC SOUND INPUT * PC INPUT JACK INPUT COMPONENT (DTV/DVD IN) AUDIO PC INPUT ANT IN ( 75 ) PC SOUND AC INPUT H/P S-VIDEO VIDEO IN* AC INPUT HEADPHONE S-VIDEO JACK COMPONENT (DTV/DVD IN) INPUT AUDIO/VIDEO ((480i/480p), Audio) INPUT 20LC1R ANTENNA INPUT * FOR SERVICE JACK COMPONENT (DTV/DVD IN) AUDIO FOR SERVICE ANT IN ( 75 ) AC INPUT H/P S-VIDEO VIDEO IN AC INPUT AUDIO/VIDEO HEADPHONE S-VIDEO JACK COMPONENT (DTV/DVD IN) INPUT
Introduction Remote Control Key Functions Remote Control Key Functions - When using the remote control, aim it at the remote control sensor on the TV. MUTE INPUT Switches the sound on or off. Selects the remote operating mode. TV (Refer to p.26) Returns to the TV mode. POWER MTS (Refer to p.22) FAV (Refer to p.19) MENU EXIT ENTER CH (Channel button) D D / E E VOL F F / G G (Volume button) NUMBER buttons AUDIO VIDEO (Refer to p.21) (Refer to p.20) CC SLEEP (Refer to p.25) (Refer to p.24) FLASHBK
Installation Installation Installation Accessories Accessories Tie Holder Owner’s Manual AAA Batteries D-sub cable (PC) Power Cord - Arrange the wires Remote Control (15LC1R ) * with the tie Holder. 2-TV Audio cable (PC) 1-TV Bracket, 2-TV Bracket, Installation guide Bracket Bolts (15LC1R ) 2-Wall Bracket 2-Wall Bracket * (20LC1R ) (15LC1R ) * * Fixing screw Rack 4-Anchor 4-Screws for wall 2-Ring spacers mount rack (20LC1R only) * Kensington Security System Kensington Security System - The TV
Installation Installation Instruction Installation Instruction Unfolding the stand base Unfolding the stand base 1. Place the set with its front facing downward on a cushion or soft cloth. 2. Hold down the release button inside the stand and strongly pull out the stand with your two hands. Note: Here shown may be somewhat different from your set. The stand won't move if you don't press release button. Wall Mount: Horizontal installation Wall Mount: Horizontal installation < 20LC1R only > * 2-Ri
12 Installation Installation Instruction Continued Installation Instruction Continued Connection of Connection of TV TV 1. Connect the aerial cable to the socket marked +75 Ω on the back. For the best reception an outdoor aerial should be used. 2. To connect an additional equipment, see the External Equipment Connections section. 3. Connect the power cord. Note: Here shown may be somewhat different from your set. ( ) Positioning your display Positioning your display Adjust the posit
Installation Please set it up carefully so the product Please set it up carefully so the product doesn’t fall over doesn’t fall over Set it up close to the wall so the product doesn’t fall over when it is pushed back- wards. The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn’t fall over when it is pulled in the forward direction. It will prevent the product from falling forward and hurting people. It will also prevent the produ
Installation External Equipment Connections External Equipment Connections Antenna Connection Antenna Connection - For optimum picture quality, adjust antenna direction. Connecting to an Inside Antenna Setup - Typical wall antenna jack used in apartment buildings, connect the antenna cable as shown below. (Use the correct type of antenna cable for the type of wall antenna jack.) Turn clockwise to tighten. NPUT ANT IN ( 75 ) 75Ω Round Cable Copper Wire 300Ω Flat Wire Antenna Converter Apartme
Installation External Equipment Connections Continued External Equipment Connections Continued VCR Setup VCR Setup - In Video mode, TV automatically reverts to TV mode if the TV buttons are pressed. COMPONENT (DTV/DVD IN) AUDIO PC INPUT ANT IN ( 75 ) PC SOUND Connection 1 H/P S-VIDEO VIDEO IN Set VCR switch to 3 or 4 and then tune TV to 2 the same channel number. Typical Antennas Connection 2 1 ANT IN 1. Connect the audio/video output jacks on VCR to the corresponding input jacks on the TV.
Installation External External A/V Source Setup A/V Source Setup Connections Connect the audio/video output jacks on the COMPONENT (DTV/DVD IN) external A/V equipment to the corresponding AUDIO PC INPUT ANT IN ( 75 ) PC SOUND input jacks on the TV. When connecting the H/P S-VIDEO VIDEO IN TV to external A/V equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). Camcorder Viewing Setup 1. Turn on the external A/V equipment. Video Game External 2. Use the
Installation COMPONENT (DTV/DVD IN) DTV Setup DTV Setup AUDIO PC INPUT ANT IN ( 75 ) PC SOUND - To watch digitally broadcast programs, purchase and con- H/P S-VIDEO VIDEO IN nect a digital set-top box. Connections Connect the digital set-top box video outputs to the COM- PONENT (Y, PB, PR) jacks and connect the digital set-top box audio outputs to the AUDIO jacks. (or, Connect the set-top box with the D-sub output socket to PC INPUT DTV Receiver YPB PR (R) AUDIO (L) socket on the set and aud
Operation Operation Operation TV Operation Overview TV Operation Overview 1.First, make all equipment connections. Plug the AC Adapter into the TV, then plug the AC Adapter into a power outlet. At this time, the TV is switched to standby mode. • In standby mode, press the POWER, TV, CH ( ), INPUT or number button on the remote con- D,E trol or ON/OFF, CH ( ), INPUT button located on the TV to turn the TV on. D,E 2. Select the viewing source by pressing INPUT. • Note: See page 18 if you have not
Operation Channel Menu Options Channel Menu Options Memorizing the Channels with EZ scan Memorizing the Channels with EZ scan - For Auto program to work, the programming source must be connected to the TV and the TV must be receiving programming signals either over-the-air or from a cable-type service provider. 1. Press the MENU button and then use button to select D D / E E CHANNEL the CHANNEL menu. EZ Scan To start 2.Press the G G button and then use button to select D D / E E Manual program F
Operation Favorite Channels Setup Favorite Channels Setup - Favorite Channel lets you quickly tune in up to 8 channels of your choice without having to wait for the TV to scan through all the in-between channels. CHANNEL Favourite channel -- ----- EZ Scan -- ----- Manual program -- ----- -- ----- Favorite channel To set -- ----- -- ----- -- ----- -- ----- -- ----- D FG Á MENU D E FG Á MENU E 1. Press the MENU button and then use button to select the CHANNEL menu. D D / E E 2. Press the G G butt
Operation Picture Menu Options Picture Menu Options EZ Video EZ Video - This function adjusts the TV for the best picture appearance. 1. Press the VIDEO button repeatedly to select the picture appearance setup option as shown below. Clear Optimum Soft User • You can also adjust EZ Video in the PICTURE menu. • Clear, Optimum and Soft are preset for good picture quality at the factory and cannot be changed. ACC (Auto Color Control) ACC (Auto Color Control) - Selecting a factory setting colour set
|1||LG Electronics 1199LLUU5500||Flat Panel Television||19|
|2||LG Electronics 141K TX)||Flat Panel Television||19|
|3||LG Electronics 15LA6R||Flat Panel Television||28|
|4||LG Electronics 1199LLUU4400||Flat Panel Television||11|
|5||LG Electronics 15LW1RA||Flat Panel Television||25|