ページ1に含まれる内容の要旨
Model No.
TH-70LF50U
TH-80LF50U
Operating Instructions
FULL HD LCD Display
Before connecting, operating or adjusting this product,
English
please read these instructions completely.
Please keep this manual for future reference.
ページ2に含まれる内容の要旨
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to quali ed service personnel. The lightning flash with The exclamation point within arrow-head within a triangle a triangle is intended to is in tend ed to tell the user tell the user that important that parts inside the product operating and servicing are a risk of electric shock instructions are in the papers to per sons
ページ3に含まれる内容の要旨
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli ers) that produce heat. 9) Do not defeat the safety purpose o
ページ4に含まれる内容の要旨
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new LCD Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt as well, and record the model number and serial number of your set in the space provided on the rear cover of these instructions. Visit our Panasonic Web Site http://pana
ページ5に含まれる内容の要旨
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee tha
ページ6に含まれる内容の要旨
Safety Precautions CAUTION This LCD Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Panasonic Corporation.) • Pedestal ................................................... TY-ST58P20 (for TH-70LF50U) TY-ST65P20 (for TH-80LF50U) • Wall-hanging bracket (vertical) ................TY-WK70PV50 • HD-SDI T
ページ7に含まれる内容の要旨
Safety Precautions WARNING Setup AC Power Supply Cord Do not place the Display on sloped or unstable The Display is designed to operate on 110 - 127 V AC, 50/60 Hz. surfaces, and ensure that the Display does not hang Ensure that the mains plug is easily accessible. over the edge of the base. Do not use any power supply cord other than that • The Display may fall off or tip over. provided with this unit. Do not place any objects on top of the Display. • Doing so may cause re or electric sh
ページ8に含まれる内容の要旨
Accessories Accessories Supplied Check that you have the Accessories and items shown Operating CD-ROM Remote Control Transmitter Batteries for the Instruction book (Operating N2QAYB000691 Remote Control instructions) Transmitter (AA Size × 2) AC cord Clamper × 1 TMME289 Remote Control Batteries Requires two AA batteries. 1. Pull and hold the hook, then 2. Insert batteries - note correct 3. Replace the cover. open the battery cover. polarity (+ and -). “AA” size - + + - Helpful Hint: For freq
ページ9に含まれる内容の要旨
Ceiling Suspension You can install the Display by attaching commercially available eyebolts (M10) to it and suspending it from the ceiling, etc. Eyebolt mounting positions (for horizontal installation) Notes: • Suspension and installation should be performed by an installation professional. • Do not install it using only one eyebolt. • When the Display is installed horizontally, make sure to place the power Indicator side down and, face up the power Indicator side, when it is installed verti
ページ10に含まれる内容の要旨
Connections AC cord connection and xing, cable xing AC cord xing Unplug the AC cord Unplug the AC cord pressing the two knobs. Plug the AC cord into the display unit. Note: Plug the AC cord until it clicks. When disconnecting the AC cord, be Note: absolutely sure to disconnect the AC Make sure that the AC cord is locked on cord plug at the socket outlet rst. both the left and right sides. AC cord (accessory) Using the clamper Secure any excess cables with clamper as required. Note:
ページ11に含まれる内容の要旨
Connections Video equipment connection Ex. TH-80LF50U SERIAL IN, SERIAL OUT AUDIO IN (COMPOSITE) SERIAL Input/Output Terminal Connect the audio output of a device Control the Display by connected to VIDEO. connecting to PC. (see page 12) (see page 15) AUDIO IN (DVI-D / PC) Connect the audio output AV IN DVI-D IN, DVI-D OUT PC IN of a device connected to HDMI DVI-D Input/ PC Input DVI-D IN, PC IN. HDMI Input Terminal Output Terminal Terminal (see page 13, 14) (see page 12) (see page 1
ページ12に含まれる内容の要旨
Connections VIDEO, COMPONENT / RGB IN and HDMI connection Note: Additional equipment, cables and adapter plugs shown are not supplied with this set. 3 1 19 DVD Player VCR 2 18 4 VIDEO OUT AUDIO OUT [Pin assignments and signal names for HDMI terminal] L R Pin No. Signal Name Pin No. Signal Name 1 11 T.M.D.S Data2+ T.M.D.S Clock Shield 2 T.M.D.S Data2 Shield 12 T.M.D.S Clock- 3 13 T.M.D.S Data2- CEC 4 T.M.D.S Data1+ Reserved 14 5 (N.C. on device) T.M.D.S Data1 Shield 6 T.M.D.S Data1- 15 SCL 7 16
ページ13に含まれる内容の要旨
Connections DVI-D IN, DVI-D OUT connection PC with DVI-D video out Shared with PC IN. DVI-video cable (Within 5 m) Stereo mini plug (M3) Daisy chain connection When using the multi display, multiple LCD Displays can be daisy chained. First LCD Display Second LCD Display PC with DVI-D video out Third and subsequent ** LCD * DVI-video cable Displays Notes: • Up to 10 displays can be connected with a daisy chain, but the number of the connected displays may be limited by a cable, signal or
ページ14に含まれる内容の要旨
Connections PC Input Terminals connection (Female) COMPUTER Conversion adapter Shared with DVI-D IN. (if necessary) (Male) RGB Mini D-sub 15p Audio Stereo mini plug (M3) Connect a cable which matches the audio output terminal on the computer. Notes: • Computer signals which can be input are those with a horizontal scanning frequency of 30 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.) • The displ
ページ15に含まれる内容の要旨
Connections SERIAL Terminals connection The SERIAL terminal is used when the Display is controlled by a computer. Note: To use serial control for this unit, make sure to set the “CONTROL I/F SELECT” in the “NETWORK SETUP” menu to “RS-232C”. (see page 45) COMPUTER RS-232C Straight cable (Male) (Female) D-sub 9p In addition, a particular LCD Display can be controlled with a PC while several LCD Displays are daisy chained. COMPUTER First LCD Display Second LCD Display (Male) (Male) (Female) (Fem
ページ16に含まれる内容の要旨
Connections Basic format for control data Command The transmission of control data from the computer starts with Command Parameter Control details a STX signal, followed by the command, the parameters, and PON None Power ON lastly an ETX signal in that order. If there are no parameters, POF None Power OFF then the parameter signal does not need to be sent. AVL *** Volume 000 - 100 AMT 0 Audio MUTE OFF STX C1 C2 C3 : P1 P2 P3 P4 P5 ETX 1 Audio MUTE ON Colon Parameter(s) End IMS None Input sele
ページ17に含まれる内容の要旨
Power ON / OFF Connecting the AC cord plug to the Display. Connecting the plug to the Wall Outlet. Note: When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet rst. Press the Power switch on the Display to turn the set on: Power-On. Power switch Power Indicator: Green Power Indicator Remote Control Sensor Press the button on the remote control to turn the Display off. Power Indicator: Red (standby) Press the button on the remote control to
ページ18に含まれる内容の要旨
Power ON / OFF When rst switching on the unit Following screen will be displayed when the unit is turned on for the rst time. Select the items with the remote control. Unit buttons are invalid. OSD LANGUAGE English (UK) OSD LANGUAGE Deutsch Français 1 Select the language. Italiano Español 2 Set. ENGLISH (US) PRESENT TIME SETUP 1 Select “DAY” or “PRESENT TIME OF DAY”. PRESENT TIME SETUP PRESENT TIME OF DAY MON 99 : 99 2 Setup “DAY” or “PRESENT TIME OF DAY”. SET MON
ページ19に含まれる内容の要旨
Selecting the input signal Press to select the input signal to be played back from the equipment which has been connected to the Display. Input signals will change as follows: HDMI VIDEO Component* PC DVI HDMI: HDMI input terminal in AV IN (HDMI). VIDEO: Video input terminal in VIDEO. Component*: Component or RGB input terminal in COMPONENT/RGB IN. PC: PC input terminal in PC IN. DVI: DVI input terminal in DVI-D IN. * “Component” may be displayed as “RGB” depending on the setting of “COMPONEN
ページ20に含まれる内容の要旨
Basic Controls Main Unit Power Indicator The Power Indicator will light. • Power-OFF .... Indicator not illuminated (The unit will still consume some power as long as the power cord is still inserted into the wall outlet.) • Standby ......... Red Orange (When “Slot power” is set to “On”. See page 47) Orange (Depending on the type of the function board installed, when the power is supplied to the slot) Orange (When “CONTROL I/F SELECT” is set to “LAN”. See page 45) • Power-ON ...... Green
