ページ1に含まれる内容の要旨
Operating Instructions
Manual de instrucciones
High Defi nition Hospitality Plasma Display
Pantalla de plasma de alta defi nición para la industria hotelera
Model No.
TH-37PR10UA
Número de modelo.
TH-42PR10UA
The illustration shown is an image.
Before connecting, operating or adjusting this product, please read these instructions completely.
Please keep this manual for future reference.
La ilustración mostrada es una imagen.
Antes de conectar, utilizar o ajustar este producto, lea completamente
ページ2に含まれる内容の要旨
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualifi ed service personnel. The lightning flash with The exclamation point within arrow-head within a triangle a triangle is intended to is in tend ed to tell the user tell the user that important that parts inside the product operating and servicing are a risk of electric shock instructions are in the papers to per sons
ページ3に含まれる内容の要旨
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifi ers) that produce heat. 9) Do not defeat the safety purpose o
ページ4に含まれる内容の要旨
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Plasma Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt as well, and record the model number and serial number of your set in the space provided on the rear cover of these instructions. Table of Contents Important Safety Instruction
ページ5に含まれる内容の要旨
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee tha
ページ6に含まれる内容の要旨
Safety Precautions CAUTION This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.) • Pedestal ...................................................................................................................... TY-ST09GR-K • Wall-hanging bracket (vertical
ページ7に含まれる内容の要旨
Safety Precautions / Maintenance WARNING Securely insert the power cord plug as far as it will go. Setup • If the plug is not fully inserted, heat may be generated Do not place the Plasma Display on sloped or unstable which could cause fire. If the plug is damaged or the surfaces. wall socket plate is loose, they should not be used. • The Plasma Display may fall off or tip over. Do not place any objects on top of the Plasma Do not handle the power cord plug with wet hands. Display. • Doing
ページ8に含まれる内容の要旨
Accessories Accessories Supplied Check that you have the Accessories and items shown Operating Instruction book AC cord Fixing bands × 2 The remote control is not included with this set. Available for purchase separately. Object model : EUR7636070R 8
ページ9に含まれる内容の要旨
Connections AC cord connection (see page 12) – AC cord fixing Unplug the AC cord Close 1 Push until the hook clicks. 1 Plug the AC cord into the display unit. Open Plug the AC cord until Unplug the AC cord pressing it clicks. 2. Pull off. the two knobs. 2 2 Fix the AC cord with the clamper which is Note: Note: When disconnecting the AC attached to the unit. Make sure that the AC cord is locked 1. Keep the cord, be absolutely sure to on both the left and right sides. knob pressed. d
ページ10に含まれる内容の要旨
Connections PC Input Terminals connection COMPUTER AUDIO PC IN Conversion adapter (if necessary) Mini D-sub 15p RGB PC cable Audio Stereo plug Connect a cable which matches the audio output terminal on the computer. Notes: • Due to space limitations, occasionally you may have trouble connecting Mini D-sub 15P cable with ferrite core to PC input Terminal. • Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48
ページ11に含まれる内容の要旨
Connections SERIAL Terminals connection The SERIAL terminal is used when the Plasma Display is controlled by a computer. COMPUTER 13 2 45 67 8 9 SERIAL RS-232C Straight cable Pin layout for SERIAL Terminal D-sub 9p Notes: • Use the RS-232C cable to connect the computer to the Plasma Display. • The computer shown is for example purposes only. • Additional equipment and cables shown are not supplied with this set. The SERIAL terminal conforms to the RS-232C interface specification, so that the Pla
ページ12に含まれる内容の要旨
Power ON / OFF Connecting the AC cord plug to the Plasma Display. Fix the AC cord plug securely to the Plasma Display with the clamper. (see page 9) Connecting the plug to the Wall Outlet. Notes: • Main plug types vary between countries. The power plug shown at right may, therefore, not be the type fitted to your set. • When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet first. Press the Power switch on the Plasma Display to turn the set
ページ13に含まれる内容の要旨
Initial selections Selecting the input signal Select the input signals to be connected by installing the optional Terminal Boards. Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display. Input signals will change as follow: INPUT1 INPUT2 INPUT3 PC Notes: • Selecting is also possible by pressing the INPUT button on the unit. • Input terminal will not be selected if the terminal board is not installed into the SLOT. • Select to match
ページ14に含まれる内容の要旨
Basic Controls INPUT button (INPUT1, INPUT2, INPUT3 and Remote control sensor PC selection) (see page 13) POWER INPUT MENU ENTER/ VOL Power Indicator Volume Adjustment The Power Indicator will light. Volume Up “+” Down “–” • Power-OFF ....Indicator not illuminated (The unit When the menu screen is displayed: will still consume some power “+” : press to move the cursor up as long as the power cord is still “–” : press to move the cursor down inserted into the wall outlet.) (see page 16) • S
ページ15に含まれる内容の要旨
Basic Controls The remote control is not included with this set. Available for purchase separately. Object model : EUR7636070R Standby (ON / OFF) button The Plasma Display must first be plugged into the wall outlet and turned on at the power switch (see page 12). Press ON to turn the Plasma Display On, from Standby mode. Press OFF to turn the Plasma Display Off R button (see page 17) to Standby mode. Press the R button to return to previous menu screen. Status button ACTION button Press to mak
ページ16に含まれる内容の要旨
On-Screen Menu Displays The MENU button on the unit can also be To PICTURE adjust menu 1 Press to select. pressed. (see page 22) PICTURE 1/2 NORMAL NORMALIZE INPUT MENU ENTER/ STANDARD PICTURE MENU VOL PICTURE 25 [ from the unit ] BRIGHTNESS 0 Each time the MENU button is pressed, the COLOR 0 menu screen will switch. TINT 0 SHARPNESS 5 Normal Viewing PICTURE SETUP SOUND POS. /SIZE PICTURE 2/2 INPUT MENU ENTER/ VOL NORMAL COLOR TEMP 1 2 OFF COLOR MANAGEMENT ADVANCED SETTINGS ON 1 Press to sele
ページ17に含まれる内容の要旨
On-Screen Menu Displays Note: Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting. [ from the unit ] 2 Press to access each adjust screen. Press the R button to return INPUT MENU ENTER/ VOL to previous menu screen. Press to return to next menu screen. To SIGNAL screen for VIDEO To SIGNAL screen for To SIGNAL screen for RGB To SIGNAL screen for Digital (S VIDEO) (see page 32, 33) COMPONENT (see page 33) (see page 33, 34) (see page 33,
ページ18に含まれる内容の要旨
ASPECT Controls The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. Press repeatedly to move through the aspect options: NORMAL ZOOM FULL Panasonic AUTO JUST Note: When selecting an input slot that attaches BNC Dual Video Terminal Board (TY-FB9BD), Panasonic AUTO cannot be selected. [ from the unit ] The aspect mode changes each time the ENTER button is pressed. INPUT MENU ENTER/ VOL [During MULTI PIP Operations] NOR
ページ19に含まれる内容の要旨
Adjusting POS. /SIZE 1 Press to display the POS. /SIZE menu. Press to select H-POS / H-SIZE / V-POS / V-SIZE / 2 CLOCK PHASE. Press to adjust POS. /SIZE. 3 During “VIDEO (S VIDEO)”, “COMPONENT” and “Digital” input signal. POS. /SIZE 4 Press to exit from adjust mode. NORMALIZE NORMAL H-POS 0 Notes: 0 H-SIZE 0 V-POS • Adjustment details are memorized separately for different input signal formats 0 V-SIZE (Adjustments for component signals are memorized for 525 (480) / 60i · 60p, 625 (575) / 50
ページ20に含まれる内容の要旨
MULTI PIP Press repeatedly. Each time pressing this button main picture and sub picture will be displayed as follows below. [Picture and Picture] [Picture out Picture] [Picture in Picture] Main picture Sub picture Main picture Sub picture Main picture Sub picture Normal B A A A B Viewing B Press to swap main A B B B A picture and sub picture. A [Example] Press to select the input mode. Main picture label is bright Sub picture label is bright Under main Picture and sub picture display,
