ページ1に含まれる内容の要旨
15” LCD
FLU-1514SA
20060928
ページ2に含まれる内容の要旨
Table Of Contents Important Safety Instructions------------------------------------------------ 2 Product Features ---------------------------------------------------------------- 4 Front Panel------------------------------------------------------------------------- 5 Rear Panel-------------------------------------------------------------------------- 6 Remote Control-------------------------------------------------------------------- 7 System Connections---------------------------------
ページ3に含まれる内容の要旨
Important Safety Instructions The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (se
ページ4に含まれる内容の要旨
Important Safety Instructions NOTES 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Maintain well ventilated conditions around the product. Do not put product on bed, sofa or anything that blocks ventilation. Install according to the manufacturer’s instructions. 8. Do not install near any heat sourc
ページ5に含まれる内容の要旨
Product Features This product incorporates an LCD display and TV receiver in one system. Multiple Mode TV mode COMPOSITE mode S-VIDEO mode COMPONENT mode VGA mode High Quality Property LCD (Liquid Crystal Display) Designed with 15" color TFT liquid crystal display that shows a clear, crisp image. Stereo amplifier Built-in stereo speakers (3 watts x 2) provide high quality sound. AV and VGA Input Can be connected to external audio/video signal sou
ページ6に含まれる内容の要旨
Front Panel 1. INPUT button Press to select the modes: TV, COMPOSITE, S-VIDEO, COMPONENT or VGA. 2. MENU button Press to enter or exit setup menu. 3. CH ▼/ ▲ button In TV mode, press to select channels. In setup menu, the same function as ▼/ ▲ direction buttons. 4. VOL ◄/ ► button In TV mode, press to decrease or increase the volume. In setup menu, the same function as ◄/ ►direction buttons. 5. POWER button Press to enter or
ページ7に含まれる内容の要旨
Rear Panel 1. Component (YPbPr) Input Jacks 4. DC 9.5V/12V In Jack Connect to the COMPONENT input and the Connect to power adapter. L/R audio inputs in COMPONENT mode. 5. VGA Input Jack 2. S-VIDEO Input Jack Connect to the VGA output jack on a Connect to the S-VIDEO input in S-VIDEO personal computer. mode 6. PC AUDIO Input Jack 3. VIDEO/L/R Audio Input Jack Connect to the PC audio output jack. Connect to the VIDEO input in
ページ8に含まれる内容の要旨
Remote Control Remote Control Drawing 1. INPUT Button Press to select the modes: TV, COMPONENT, VGA, COMPOSITE or S-VIDEO. 2. 0~9 Number Buttons Press to select numbers. 3. LAST Button In the TV mode, press to return to the channel last viewed. 4. MUTE Button Press to turn on or off the speaker output. 5. Direction Buttons ( ▲▼◄ ►) In the setup menu, press the ▲▼button to select the desired items, press the ◄► butto
ページ9に含まれる内容の要旨
Remote Control Prepare the Remote Control Using of Remote control Point the remote control no more than about Gently push the back cover to open the battery 7m from the remote control sensor and within compartment. about 60 degrees of the front of the unit. Insert two batteries (1.5V, size AAA) into the compartment; please make sure the polarity matches the symbols on the inside the compartment.
ページ10に含まれる内容の要旨
System Connections • Do not connect the power cord until all other connections have been made. • Remove the jack cover before making any connections. • Make sure you observe the color cord when connecting audio and video cables. Connecting to External AV Signal Source Use the audio and video cables to connect to the AV input jacks on the rear panel of the unit and to the external AV signal source. Use the S-VIDEO cable to connect the S-VIDEO input jack on the rear pa
ページ11に含まれる内容の要旨
System Connections Connecting to External AV Signal Source (COMPONENT) Use the audio and video cables to connect the Component input jacks on the rear panel of the unit to the external AV signal source. After connection, turn on the power of the unit and external AV signal source and then press the INPUT button to shift to COMPONENT mode. - 10 -
ページ12に含まれる内容の要旨
System Connections Connecting to PC The unit can be connected to PC (person computer) via the VGA cable. Follow the steps and the figure below to connect: 1. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit. 2. Connect the other end to the PC. 3. Connect one end of the audio cable to the PC audio input jack on the rear panel of the unit. 4. Connect the other end to the PC audio output jack. 5. Please set the PC’s resolution at 102
ページ13に含まれる内容の要旨
System Connections Connecting to Power Cable Plug the two-prong end of the power cord to an AC100-240V outlet. If you have difficulty inserting the plug, turn it over and reinsert it. If the unit will not be used for a long time, disconnect the plug from the outlet. - 12 -
ページ14に含まれる内容の要旨
System Connections Connecting to TV Signal This unit can be connected to the TV signal input source via the TV jack on the rear panel. After connection, turn on the power of the unit; press the INPUT button to shift to TV mode. After connecting to the antenna, turn on the unit, and go on with program searching, you can follow the below steps to select channels: 1. For 0~9 channel: Press the number buttons to select the channel X, it
ページ15に含まれる内容の要旨
TV Function Preparations 1. After connection, press the POWER button to turn on the power. 2. Press the INPUT button to shift to TV mode. You can go on with the following operations: Image Setting Note: This item is only available when there is a signal input. Press the MENU button once to enter the setup menu, as shown on the right: In the setup menu, press the ▲▼ button to select Image and then press the OK button to enter the item. Press the ▲▼ butt
ページ16に含まれる内容の要旨
TV Function Brightness Setup Press the ▲▼ button to select Brightness and press the ◄► button to adjust the value. Press the MENU button to return to the previous menu. Contrast Setup Press the ▲▼ button to select Contrast and press the ◄► button to adjust the value. Press the MENU button to return to the previous menu. Hue Setup Press the ▲▼ button to select Hue and press the ◄► button to adjust the value. Press the MENU button to return to
ページ17に含まれる内容の要旨
TV Function Audio Setting Press the MENU button once to enter the setup menu. Press the ▲▼ button to select Audio and press the OK button to enter the menu shown on the right. In the Audio setup menu, press the ▲▼ button to select the desired item and press the OK button to enter. Press the MENU button to return to the previous menu. Volume Setup Press the ▲▼ button to select Volume and press the ◄► button to adjust the level. Press the MENU button to r
ページ18に含まれる内容の要旨
TV Function Timer Setting Press the MENU button to enter the setup menu. Press the ▲▼ button to select Timer and press the OK button to enter the menu shown on the right. In the Timer setup menu, press the ▲▼ button to select 15Min, 30Min, 45Min, 60Min, 75Min, 90Min, 105Min, 120Min or Off. Press the MENU button to return to the previous menu. Setup Setting Press the MENU button once to enter the setup menu. Press the▲▼ button to select Setup and
ページ19に含まれる内容の要旨
TV Function Country Setup Press the ▲▼ button to select Country and press the OK button to enter. Press the ▲▼button to select the desired item and press the OK button to confirm your selection. Press the MENU button to return to the previous menu. Auto Scan Press the ▲▼ button to select the Auto Scan, press the OK button to start auto scan. The following will display on the screen: Auto scan will take a few minutes. When the tun
ページ20に含まれる内容の要旨
TV Function Channel Name Press the ▲▼ button to select the Channel Name and press the OK button to enter. Then press the ▲▼button to select letters or press the number button to input numbers. Press the MENU button to return to the previous menu. Skip Press the ▲▼ button to select the Add Program and press the OK button to cancel the skip function which when using the CH ▲▼button to select channels under normal playback status, it will play the channels in
